Se reinicia mi sistema.

Imagen de Agvstyn
0 puntos

Buenas tardes a todos!

Soy nuevo en el foro y vengo a consultarles acerca de un problema que tengo, no estoy seguro si es en este foro donde debo hacerlo, pero ya que cuento con esta distribucion me parecio el lugar mas correcto.

No soy muy ducho en el sistema aun, hace un mes que instale linux en mi pc, por problemas con un disco rigido (tuve que cambiar el disco rigido y probe instalando el OS Ubuntu)... y quizas no puedo darle todas las coordenadas para que sepan que pasa con mi sistema.

En fin, sin muchos rodeos es esto lo que le sucede:

Ayer en la noche estaba chateando y escuchando música (aclaro para que se note que no estaba dandole un uso pesado a la pc) y de repente se reinicio.

A partir de ese momento, aleatoriamente usando la pc (en cualquier momento a partir de que iniciaba el grub) se reinicia el sistema.

¿Alguna sugerencia de que puede ser?... tambien tengo un log que quizas les pueda servir, pero me dijeron que este problema ya habia sido reportado y existia una solucion

Ayuda! :P

Edito, les traigo el log

[ 0.444407] PCI: Using configuration type 1 for base access
[ 0.448465] ACPI: EC: Look up EC in DSDT
[ 2.459393] ACPI: Interpreter enabled
[ 2.459398] ACPI: (supports S0 S1 S3 S4 S5)
[ 2.459422] ACPI: Using IOAPIC for interrupt routing
[ 2.472192] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 2.472192] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 2.472192] pci 0000:00:01.0: PME# disabled
[ 2.472198] PCI: 0000:00:1b.0 reg 10 64bit mmio: [febfc000, febfffff]
[ 2.472239] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 2.472243] pci 0000:00:1b.0: PME# disabled
[ 2.472296] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 2.472300] pci 0000:00:1c.0: PME# disabled
[ 2.472352] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 2.472357] pci 0000:00:1c.1: PME# disabled
[ 2.472409] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 2.472413] pci 0000:00:1c.2: PME# disabled
[ 2.472465] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 2.472470] pci 0000:00:1c.3: PME# disabled
[ 2.472510] PCI: 0000:00:1d.0 reg 20 io port: [cc00, cc1f]
[ 2.472561] PCI: 0000:00:1d.1 reg 20 io port: [d000, d01f]
[ 2.472611] PCI: 0000:00:1d.2 reg 20 io port: [d400, d41f]
[ 2.472662] PCI: 0000:00:1d.3 reg 20 io port: [d800, d81f]
[ 2.472718] PCI: 0000:00:1d.7 reg 10 32bit mmio: [febfbc00, febfbfff]
[ 2.472767] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 2.472772] pci 0000:00:1d.7: PME# disabled
[ 2.472880] pci 0000:00:1f.0: Force enabled HPET at 0xfed00000
[ 2.472887] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO
[ 2.472891] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO
[ 2.472911] PCI: 0000:00:1f.1 reg 10 io port: [0, 7]
[ 2.472919] PCI: 0000:00:1f.1 reg 14 io port: [0, 3]
[ 2.472926] PCI: 0000:00:1f.1 reg 18 io port: [0, 7]
[ 2.472933] PCI: 0000:00:1f.1 reg 1c io port: [0, 3]
[ 2.472940] PCI: 0000:00:1f.1 reg 20 io port: [ffa0, ffaf]
[ 2.472982] PCI: 0000:00:1f.2 reg 10 io port: [ec00, ec07]
[ 2.472989] PCI: 0000:00:1f.2 reg 14 io port: [e800, e803]
[ 2.472995] PCI: 0000:00:1f.2 reg 18 io port: [e400, e407]
[ 2.473002] PCI: 0000:00:1f.2 reg 1c io port: [e000, e003]
[ 2.473008] PCI: 0000:00:1f.2 reg 20 io port: [dc00, dc0f]
[ 2.473031] pci 0000:00:1f.2: PME# supported from D3hot
[ 2.473036] pci 0000:00:1f.2: PME# disabled
[ 2.473080] PCI: 0000:00:1f.3 reg 20 io port: [c800, c81f]
[ 2.473133] PCI: 0000:01:00.0 reg 10 32bit mmio: [fd000000, fdffffff]
[ 2.473140] PCI: 0000:01:00.0 reg 14 32bit mmio: [c0000000, cfffffff]
[ 2.473154] PCI: 0000:01:00.0 reg 1c 64bit mmio: [fc000000, fcffffff]
[ 2.473164] PCI: 0000:01:00.0 reg 30 32bit mmio: [fe5e0000, fe5fffff]
[ 2.473215] PCI: bridge 0000:00:01.0 32bit mmio: [fa500000, fe5fffff]
[ 2.473220] PCI: bridge 0000:00:01.0 32bit mmio pref: [bf900000, df9fffff]
[ 2.473265] PCI: bridge 0000:00:1c.0 32bit mmio: [fe900000, fe9fffff]
[ 2.473273] PCI: bridge 0000:00:1c.0 64bit mmio pref: [dfd00000, dfdfffff]
[ 2.473336] PCI: 0000:04:00.0 reg 10 64bit mmio: [fe8fc000, fe8fffff]
[ 2.473346] PCI: 0000:04:00.0 reg 18 io port: [b800, b8ff]
[ 2.473374] PCI: 0000:04:00.0 reg 30 32bit mmio: [fe8c0000, fe8dffff]
[ 2.473396] pci 0000:04:00.0: supports D1
[ 2.473398] pci 0000:04:00.0: supports D2
[ 2.473400] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 2.473406] pci 0000:04:00.0: PME# disabled
[ 2.473442] PCI: bridge 0000:00:1c.1 io port: [b000, bfff]
[ 2.473447] PCI: bridge 0000:00:1c.1 32bit mmio: [fe800000, fe8fffff]
[ 2.473453] PCI: bridge 0000:00:1c.1 64bit mmio pref: [dfc00000, dfcfffff]
[ 2.473499] PCI: bridge 0000:00:1c.2 32bit mmio: [fe700000, fe7fffff]
[ 2.473506] PCI: bridge 0000:00:1c.2 64bit mmio pref: [dfb00000, dfbfffff]
[ 2.473551] PCI: bridge 0000:00:1c.3 32bit mmio: [fe600000, fe6fffff]
[ 2.473558] PCI: bridge 0000:00:1c.3 64bit mmio pref: [dfa00000, dfafffff]
[ 2.473609] pci 0000:00:1e.0: transparent bridge
[ 2.473616] PCI: bridge 0000:00:1e.0 32bit mmio: [fea00000, feafffff]
[ 2.473623] PCI: bridge 0000:00:1e.0 64bit mmio pref: [dfe00000, dfefffff]
[ 2.473651] bus 00 -> node 0
[ 2.473659] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 2.473931] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT]
[ 2.474080] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P2._PRT]
[ 2.474391] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX1._PRT]
[ 2.474537] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX2._PRT]
[ 2.480244] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 *11 12 14 15)
[ 2.480394] ACPI: PCI Interrupt Link [LNKB] (IRQs *3 4 5 6 7 9 10 11 12 14 15)
[ 2.480410] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 9 10 11 12 14 15)
[ 2.480667] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 *10 11 12 14 15)
[ 2.480925] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 2.481188] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 2.481449] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 9 10 11 12 14 15) *0, disabled.
[ 2.481711] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *9 10 11 12 14 15)
[ 2.481838] ACPI: Power Resource [URP1] (off)
[ 2.481838] ACPI: Power Resource [FDDP] (off)
[ 2.481838] ACPI: Power Resource [LPTP] (off)
[ 2.481838] ACPI: Power Resource [URP2] (off)
[ 2.481838] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 2.481838] pnp: PnP ACPI init
[ 2.481838] ACPI: bus type pnp registered
[ 2.488816] pnp: PnP ACPI: found 15 devices
[ 2.488820] ACPI: ACPI bus type pnp unregistered
[ 2.488824] PnPBIOS: Disabled by ACPI PNP
[ 2.488848] PCI: Using ACPI for IRQ routing
[ 2.492049] NET: Registered protocol family 8
[ 2.492052] NET: Registered protocol family 20
[ 2.492074] NetLabel: Initializing
[ 2.492074] NetLabel: domain hash size = 128
[ 2.492074] NetLabel: protocols = UNLABELED CIPSOv4
[ 2.492080] NetLabel: unlabeled traffic allowed by default
[ 2.492152] hpet clockevent registered
[ 2.492158] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 2.492164] hpet0: 3 64-bit timers, 14318180 Hz
[ 2.493794] tracer: 772 pages allocated for 65536 entries of 48 bytes
[ 2.493797] actual entries 65620
[ 2.493913] AppArmor: AppArmor Filesystem Enabled
[ 2.493935] ACPI: RTC can wake from S4
[ 2.496482] system 00:09: ioport range 0x4d0-0x4d1 has been reserved
[ 2.496486] system 00:09: ioport range 0x400-0x47f has been reserved
[ 2.496489] system 00:09: ioport range 0x500-0x53f has been reserved
[ 2.496499] system 00:0b: iomem range 0xffc00000-0xfff7ffff has been reserved
[ 2.496506] system 00:0c: ioport range 0x400-0x47f has been reserved
[ 2.496509] system 00:0c: ioport range 0x680-0x6ff has been reserved
[ 2.496512] system 00:0c: ioport range 0x500-0x53f has been reserved
[ 2.496515] system 00:0c: iomem range 0xeec00000-0xeec03fff could not be reserved
[ 2.496519] system 00:0c: iomem range 0xfec00000-0xfec00fff has been reserved
[ 2.496522] system 00:0c: iomem range 0xfee00000-0xfee00fff has been reserved
[ 2.496525] system 00:0c: iomem range 0xe0000000-0xefffffff could not be reserved
[ 2.496529] system 00:0c: iomem range 0xfed13000-0xfed13fff could not be reserved
[ 2.496532] system 00:0c: iomem range 0xfed14000-0xfed17fff could not be reserved
[ 2.496535] system 00:0c: iomem range 0xfed18000-0xfed18fff could not be reserved
[ 2.496538] system 00:0c: iomem range 0xfed19000-0xfed19fff could not be reserved
[ 2.496542] system 00:0c: iomem range 0xfed1c000-0xfed1ffff could not be reserved
[ 2.496545] system 00:0c: iomem range 0xfed20000-0xfed9ffff could not be reserved
[ 2.496554] system 00:0e: iomem range 0x0-0x9ffff could not be reserved
[ 2.496558] system 00:0e: iomem range 0xc0000-0xdffff could not be reserved
[ 2.496561] system 00:0e: iomem range 0xe0000-0xfffff could not be reserved
[ 2.496564] system 00:0e: iomem range 0x100000-0x3fffffff could not be reserved
[ 2.532012] pci 0000:00:01.0: PCI bridge, secondary bus 0000:01
[ 2.532015] pci 0000:00:01.0: IO window: disabled
[ 2.532020] pci 0000:00:01.0: MEM window: 0xfa500000-0xfe5fffff
[ 2.532025] pci 0000:00:01.0: PREFETCH window: 0x000000bf900000-0x000000df9fffff
[ 2.532033] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 2.532037] pci 0000:00:1c.0: IO window: disabled
[ 2.532043] pci 0000:00:1c.0: MEM window: 0xfe900000-0xfe9fffff
[ 2.532047] pci 0000:00:1c.0: PREFETCH window: 0x000000dfd00000-0x000000dfdfffff
[ 2.532055] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:04
[ 2.532059] pci 0000:00:1c.1: IO window: 0xb000-0xbfff
[ 2.532064] pci 0000:00:1c.1: MEM window: 0xfe800000-0xfe8fffff
[ 2.532069] pci 0000:00:1c.1: PREFETCH window: 0x000000dfc00000-0x000000dfcfffff
[ 2.532076] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:03
[ 2.532078] pci 0000:00:1c.2: IO window: disabled
[ 2.532083] pci 0000:00:1c.2: MEM window: 0xfe700000-0xfe7fffff
[ 2.532088] pci 0000:00:1c.2: PREFETCH window: 0x000000dfb00000-0x000000dfbfffff
[ 2.532095] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:02
[ 2.532097] pci 0000:00:1c.3: IO window: disabled
[ 2.532102] pci 0000:00:1c.3: MEM window: 0xfe600000-0xfe6fffff
[ 2.532107] pci 0000:00:1c.3: PREFETCH window: 0x000000dfa00000-0x000000dfafffff
[ 2.532114] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 2.532116] pci 0000:00:1e.0: IO window: disabled
[ 2.532121] pci 0000:00:1e.0: MEM window: 0xfea00000-0xfeafffff
[ 2.532126] pci 0000:00:1e.0: PREFETCH window: 0x000000dfe00000-0x000000dfefffff
[ 2.532143] pci 0000:00:01.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 2.532147] pci 0000:00:01.0: setting latency timer to 64
[ 2.532157] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 2.532162] pci 0000:00:1c.0: setting latency timer to 64
[ 2.532170] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 2.532175] pci 0000:00:1c.1: setting latency timer to 64
[ 2.532184] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 2.532190] pci 0000:00:1c.2: setting latency timer to 64
[ 2.532200] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 2.532204] pci 0000:00:1c.3: setting latency timer to 64
[ 2.532212] pci 0000:00:1e.0: setting latency timer to 64
[ 2.532216] bus: 00 index 0 io port: [0, ffff]
[ 2.532219] bus: 00 index 1 mmio: [0, ffffffff]
[ 2.532221] bus: 01 index 0 mmio: [0, 0]
[ 2.532224] bus: 01 index 1 mmio: [fa500000, fe5fffff]
[ 2.532226] bus: 01 index 2 mmio: [bf900000, df9fffff]
[ 2.532228] bus: 01 index 3 mmio: [0, 0]
[ 2.532231] bus: 05 index 0 mmio: [0, 0]
[ 2.532233] bus: 05 index 1 mmio: [fe900000, fe9fffff]
[ 2.532235] bus: 05 index 2 mmio: [dfd00000, dfdfffff]
[ 2.532237] bus: 05 index 3 mmio: [0, 0]
[ 2.532240] bus: 04 index 0 io port: [b000, bfff]
[ 2.532242] bus: 04 index 1 mmio: [fe800000, fe8fffff]
[ 2.532244] bus: 04 index 2 mmio: [dfc00000, dfcfffff]
[ 2.532246] bus: 04 index 3 mmio: [0, 0]
[ 2.532249] bus: 03 index 0 mmio: [0, 0]
[ 2.532251] bus: 03 index 1 mmio: [fe700000, fe7fffff]
[ 2.532253] bus: 03 index 2 mmio: [dfb00000, dfbfffff]
[ 2.532255] bus: 03 index 3 mmio: [0, 0]
[ 2.532258] bus: 02 index 0 mmio: [0, 0]
[ 2.532260] bus: 02 index 1 mmio: [fe600000, fe6fffff]
[ 2.532262] bus: 02 index 2 mmio: [dfa00000, dfafffff]
[ 2.532264] bus: 02 index 3 mmio: [0, 0]
[ 2.532266] bus: 06 index 0 mmio: [0, 0]
[ 2.532269] bus: 06 index 1 mmio: [fea00000, feafffff]
[ 2.532271] bus: 06 index 2 mmio: [dfe00000, dfefffff]
[ 2.532273] bus: 06 index 3 io port: [0, ffff]
[ 2.532275] bus: 06 index 4 mmio: [0, ffffffff]
[ 2.532287] NET: Registered protocol family 2
[ 2.544516] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 2.544827] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 2.545158] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 2.545387] TCP: Hash tables configured (established 131072 bind 65536)
[ 2.545390] TCP reno registered
[ 2.548551] NET: Registered protocol family 1
[ 2.548694] checking if image is initramfs... it is
[ 2.992486] Switched to high resolution mode on CPU 1
[ 2.996072] Switched to high resolution mode on CPU 0
[ 3.144920] Freeing initrd memory: 7995k freed
[ 3.146495] audit: initializing netlink socket (disabled)
[ 3.146512] type=2000 audit(1231027927.145:1): initialized
[ 3.151238] highmem bounce pool size: 64 pages
[ 3.151246] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 3.154735] VFS: Disk quotas dquot_6.5.1
[ 3.154857] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 3.154994] msgmni has been set to 1761
[ 3.155166] io scheduler noop registered
[ 3.155169] io scheduler anticipatory registered
[ 3.155172] io scheduler deadline registered
[ 3.155186] io scheduler cfq registered (default)
[ 3.155301] pci 0000:01:00.0: Boot video device
[ 3.155454] pcieport-driver 0000:00:01.0: setting latency timer to 64
[ 3.155495] pcieport-driver 0000:00:01.0: found MSI capability
[ 3.155530] pci_express 0000:00:01.0cie00: allocate port service
[ 3.155598] pci_express 0000:00:01.0cie03: allocate port service
[ 3.155711] pcieport-driver 0000:00:1c.0: setting latency timer to 64
[ 3.155747] pcieport-driver 0000:00:1c.0: found MSI capability
[ 3.155784] pci_express 0000:00:1c.0cie00: allocate port service
[ 3.155858] pci_express 0000:00:1c.0cie02: allocate port service
[ 3.155922] pci_express 0000:00:1c.0cie03: allocate port service
[ 3.156058] pcieport-driver 0000:00:1c.1: setting latency timer to 64
[ 3.156095] pcieport-driver 0000:00:1c.1: found MSI capability
[ 3.156131] pci_express 0000:00:1c.1cie00: allocate port service
[ 3.156198] pci_express 0000:00:1c.1cie02: allocate port service
[ 3.156284] pci_express 0000:00:1c.1cie03: allocate port service
[ 3.156414] pcieport-driver 0000:00:1c.2: setting latency timer to 64
[ 3.156450] pcieport-driver 0000:00:1c.2: found MSI capability
[ 3.156487] pci_express 0000:00:1c.2cie00: allocate port service
[ 3.156563] pci_express 0000:00:1c.2cie02: allocate port service
[ 3.156627] pci_express 0000:00:1c.2cie03: allocate port service
[ 3.156746] pcieport-driver 0000:00:1c.3: setting latency timer to 64
[ 3.156782] pcieport-driver 0000:00:1c.3: found MSI capability
[ 3.156819] pci_express 0000:00:1c.3cie00: allocate port service
[ 3.156886] pci_express 0000:00:1c.3cie02: allocate port service
[ 3.156973] pci_express 0000:00:1c.3cie03: allocate port service
[ 3.157517] isapnp: Scanning for PnP cards...
[ 3.509143] isapnp: No Plug & Play device found
[ 3.565705] Serial: 8250/16550 driver4 ports, IRQ sharing enabled
[ 3.565858] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.566831] 00 ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 3.569723] brd: module loaded
[ 3.569818] input: Macintosh mouse button emulation as /devices/virtual/input/input0
[ 3.570011] PNP: PS/2 Controller [PNP0f03:PS2M] at 0x60,0x64 irq 12
[ 3.570014] PNP: PS/2 controller doesn't have KBD irq; using default 1
[ 3.573018] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 3.573026] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 3.573487] mice: PS/2 mouse device common for all mice
[ 3.573688] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0
[ 3.573715] rtc0: alarms up to one month, hpet irqs
[ 3.573930] EISA: Probing bus 0 at eisa.0
[ 3.573960] EISA: Detected 0 cards.
[ 3.573963] cpuidle: using governor ladder
[ 3.573966] cpuidle: using governor menu
[ 3.574606] TCP cubic registered
[ 3.574641] Using IPI No-Shortcut mode
[ 3.574938] registered taskstats version 1
[ 3.575067] Magic number: 9:431:202
[ 3.575095] tty ttyt0: hash matches
[ 3.575186] rtc_cmos 00:02: setting system clock to 2009-01-04 00:12:08 UTC (1231027928)
[ 3.575190] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 3.575192] EDD information not available.
[ 3.575443] Freeing unused kernel memory: 424k freed
[ 3.575500] Write protecting the kernel text: 2576k
[ 3.575535] Write protecting the kernel read-only data: 936k
[ 3.777085] fuse init (API version 7.9)
[ 4.106001] processor ACPI0007:00: registered as cooling_device0
[ 4.106008] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 4.106153] processor ACPI0007:01: registered as cooling_device1
[ 4.106164] ACPI: Processor [CPU2] (supports 8 throttling states)
[ 4.635586] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 4.635601] sky2 0000:04:00.0: setting latency timer to 64
[ 4.635627] sky2 0000:04:00.0: v1.22 addr 0xfe8fc000 irq 17 Yukon-2 EC rev 1
[ 4.636297] sky2 eth0: addr 00:11:11:a0:23:57
[ 4.688914] usbcore: registered new interface driver usbfs
[ 4.688952] usbcore: registered new interface driver hub
[ 4.689053] usbcore: registered new device driver usb
[ 4.692779] USB Universal Host Controller Interface driver v3.0
[ 4.692850] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 4.692864] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 4.692871] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 4.692939] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1
[ 4.692980] uhci_hcd 0000:00:1d.0: irq 23, io base 0x0000cc00
[ 4.693241] usb usb1: configuration #1 chosen from 1 choice
[ 4.693488] hub 1-0:1.0: USB hub found
[ 4.693503] hub 1-0:1.0: 2 ports detected
[ 4.783267] No dock devices found.
[ 4.810191] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 4.810204] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 4.810211] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 4.810299] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2
[ 4.810345] uhci_hcd 0000:00:1d.1: irq 19, io base 0x0000d000
[ 4.810582] usb usb2: configuration #1 chosen from 1 choice
[ 4.810634] hub 2-0:1.0: USB hub found
[ 4.810650] hub 2-0:1.0: 2 ports detected
[ 4.812074] SCSI subsystem initialized
[ 4.867104] libata version 3.00 loaded.
[ 4.913488] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 4.913502] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 4.913509] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 4.913556] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3
[ 4.913600] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000d400
[ 4.913778] usb usb3: configuration #1 chosen from 1 choice
[ 4.913832] hub 3-0:1.0: USB hub found
[ 4.913846] hub 3-0:1.0: 2 ports detected
[ 5.017454] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 5.017471] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 5.017478] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 5.017538] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4
[ 5.017587] uhci_hcd 0000:00:1d.3: irq 16, io base 0x0000d800
[ 5.017793] usb usb4: configuration #1 chosen from 1 choice
[ 5.017854] hub 4-0:1.0: USB hub found
[ 5.017867] hub 4-0:1.0: 2 ports detected
[ 5.225679] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 5.225700] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 5.225707] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 5.225782] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5
[ 5.229715] ehci_hcd 0000:00:1d.7: debug port 1
[ 5.229724] ehci_hcd 0000:00:1d.7: cache line size of 128 is not supported
[ 5.229734] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfebfbc00
[ 5.340055] usb 4-2: new low speed USB device using uhci_hcd and address 2
[ 5.352124] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.352380] usb usb5: configuration #1 chosen from 1 choice
[ 5.352438] hub 5-0:1.0: USB hub found
[ 5.352452] hub 5-0:1.0: 8 ports detected
[ 5.405081] hub 4-0:1.0: unable to enumerate USB device on port 2
[ 5.556311] ata_piix 0000:00:1f.1: version 2.12
[ 5.556334] ata_piix 0000:00:1f.1: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 5.556390] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 5.556491] scsi0 : ata_piix
[ 5.556687] scsi1 : ata_piix
[ 5.559975] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0xffa0 irq 14
[ 5.559983] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0xffa8 irq 15
[ 5.736347] ata1.00: ATAPI: HL-DT-ST DVDRAM GSA-H10A, JL02, max UDMA/33
[ 5.736544] ata1.01: ATA-7: HDS728080PLAT20, PF2OA2AA, max UDMA/133
[ 5.736548] ata1.01: 160836480 sectors, multi 16: LBA48
[ 5.736562] ata1.01: limited to UDMA/33 due to 40-wire cable
[ 5.756278] ata1.00: configured for UDMA/33
[ 5.780452] ata1.01: configured for UDMA/33
[ 5.852019] usb 4-2: new low speed USB device using uhci_hcd and address 3
[ 5.950510] scsi 0:0:0:0: CD-ROM HL-DT-ST DVDRAM GSA-H10A JL02 PQ: 0 ANSI: 5
[ 5.950695] scsi 0:0:1:0: Direct-Access ATA HDS728080PLAT20 PF2O PQ: 0 ANSI: 5
[ 5.950793] ata_piix 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 5.950799] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ]
[ 5.950843] ata_piix 0000:00:1f.2: setting latency timer to 64
[ 5.951656] scsi2 : ata_piix
[ 5.951760] scsi3 : ata_piix
[ 5.953046] ata3: SATA max UDMA/133 cmd 0xec00 ctl 0xe800 bmdma 0xdc00 irq 19
[ 5.953050] ata4: SATA max UDMA/133 cmd 0xe400 ctl 0xe000 bmdma 0xdc08 irq 19
[ 6.026116] usb 4-2: configuration #1 chosen from 1 choice
[ 6.055338] usbcore: registered new interface driver hiddev
[ 6.073981] input: ABBAHOME as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.0/input/input1
[ 6.074347] input,hidraw0: USB HID v1.10 Keyboard [ABBAHOME] on usb-0000:00:1d.3-2
[ 6.097086] input: ABBAHOME as /devices/pci0000:00/0000:00:1d.3/usb4/4-2/4-2:1.1/input/input2
[ 6.101150] input,hidraw1: USB HID v1.10 Mouse [ABBAHOME] on usb-0000:00:1d.3-2
[ 6.101175] usbcore: registered new interface driver usbhid
[ 6.101180] usbhid: v2.6:USB HID core driver
[ 6.308717] scsi 0:0:0:0: Attached scsi generic sg0 type 5
[ 6.308781] scsi 0:0:1:0: Attached scsi generic sg1 type 0
[ 6.334486] Driver 'sr' needs updating - please use bus_type methods
[ 6.338949] Driver 'sd' needs updating - please use bus_type methods
[ 6.349804] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
[ 6.349809] Uniform CD-ROM driver Revision: 3.20
[ 6.349919] sr 0:0:0:0: Attached scsi CD-ROM sr0
[ 6.350109] sd 0:0:1:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 6.350152] sd 0:0:1:0: [sda] Write Protect is off
[ 6.350158] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.350373] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.350523] sd 0:0:1:0: [sda] 160836480 512-byte hardware sectors (82348 MB)
[ 6.350558] sd 0:0:1:0: [sda] Write Protect is off
[ 6.350563] sd 0:0:1:0: [sda] Mode Sense: 00 3a 00 00
[ 6.350624] sd 0:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.350632] sda: sda1 sda2 < sda5 >
[ 6.384211] sd 0:0:1:0: [sda] Attached SCSI disk
[ 6.596264] PM: Starting manual resume from disk
[ 6.596269] PM: Resume from partition 8:5
[ 6.596271] PM: Checking hibernation image.
[ 6.596500] PM: Resume from disk failed.
[ 6.652258] kjournald starting. Commit interval 5 seconds
[ 6.652268] EXT3-fs: mounted filesystem with ordered data mode.
[ 13.075513] udevd version 124 started
[ 13.667295] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 13.704573] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 13.812927] Linux agpgart interface v0.103
[ 14.075000] iTCO_vendor_support: vendor-support=0
[ 14.116089] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.03 (30-Apr-2008)
[ 14.116267] iTCO_wdt: Found a ICH6 or ICH6R TCO device (Version=2, TCOBASE=0x0460)
[ 14.116428] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 14.170749] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 14.189298] ACPI: Power Button (FF) [PWRF]
[ 14.189508] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4
[ 14.202253] intel_rng: FWH not detected
[ 14.221038] ACPI: Power Button (CM) [PWRB]
[ 15.041688] tpm_inf_pnp 00:0d: Found TPM with ID IFX0101
[ 15.041731] tpm_inf_pnp 00:0d: TPM found: config base 0x4e, data base 0x4700, chip version 0x0006, vendor id 0x15d1 (Infineon), product id 0x0006 (SLD 9630 TT 1.1)
[ 15.133210] ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0 : found ejectable bay
[ 15.133219] ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0 : Adding notify handler
[ 15.133264] ACPI: Error installing bay notify handler
[ 15.213185] parport_pc 00:08: reported by Plug and Play ACPI
[ 15.213216] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE,EPP]
[ 15.221029] parport0: Printer, Hewlett-Packard HP LaserJet 6MP
[ 15.643624] nvidia: module license 'NVIDIA' taints kernel.
[ 15.910025] nvidia 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 15.910038] nvidia 0000:01:00.0: setting latency timer to 64
[ 15.910255] NVRM: loading NVIDIA UNIX x86 Kernel Module 177.80 Wed Oct 1 14:38:10 PDT 2008
[ 15.912688] input: PC Speaker as /devices/platform/pcspkr/input/input5
[ 16.307880] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 16.307908] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 16.627594] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6
[ 18.035994] lp0: using parport0 (interrupt-driven).
[ 18.211484] Adding 3020180k swap on /dev/sda5. Priority:-1 extents:1 across:3020180k
[ 18.773504] EXT3 FS on sda1, internal journal
[ 20.092104] type=1505 audit(1231035145.182:2): operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" name2="default" pid=4089
[ 20.282910] type=1505 audit(1231035145.370:3): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=4094
[ 20.283088] type=1505 audit(1231035145.370:4): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=4094
[ 20.485600] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 21.102827] ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0 : found ejectable bay
[ 21.102834] ACPI: \_SB_.PCI0.IDE1.CHN1.DRV0 : Adding notify handler
[ 21.102867] ACPI: Error installing bay notify handler
[ 21.200624] ACPI: WMI: Mapper loaded
[ 22.178893] warning: `avahi-daemon' uses 32-bit capabilities (legacy support in use)
[ 22.267806] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 22.267814] apm: disabled - APM is not SMP safe.
[ 22.422124] ppdev: user-space parallel port driver
[ 25.172539] NET: Registered protocol family 10
[ 25.174738] lo: Disabled Privacy Extensions
[ 26.232918] Bluetooth: Core ver 2.13
[ 26.233324] NET: Registered protocol family 31
[ 26.233333] Bluetooth: HCI device and connection manager initialized
[ 26.233339] Bluetooth: HCI socket layer initialized
[ 26.256555] Bluetooth: L2CAP ver 2.11
[ 26.256562] Bluetooth: L2CAP socket layer initialized
[ 26.275656] Bluetooth: SCO (Voice Link) ver 0.6
[ 26.275663] Bluetooth: SCO socket layer initialized
[ 26.295359] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 26.295367] Bluetooth: BNEP filters: protocol multicast
[ 26.325673] Bridge firewalling registered
[ 26.326538] pan0: Dropping NETIF_F_UFO since no NETIF_F_HW_CSUM feature.
[ 26.373818] Bluetooth: RFCOMM socket layer initialized
[ 26.375426] Bluetooth: RFCOMM TTY layer initialized
[ 26.375436] Bluetooth: RFCOMM ver 1.10
[ 30.537549] sky2 eth0: enabling interface
[ 30.539871] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 33.618446] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 33.618669] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 33.725266] NET: Registered protocol family 17
[ 43.700009] eth0: no IPv6 routers present
[ 135.408281] ppdev0: registered pardevice
[ 135.462855] ppdev0: unregistered pardevice
[ 137.707830] ppdev0: registered pardevice
[ 137.719237] ppdev0: unregistered pardevice
[ 137.728362] ppdev0: registered pardevice
[ 137.736321] ppdev0: negotiated back to compatibility mode because user-space forgot
[ 137.736330] ppdev0: unregistered pardevice

Imagen de Agvstyn
+1
0
-1

Demasiado complejo? :(

+1
0
-1