Dell PowerEdge 830 Ubuntu Missing modules

Imagen de Uchiha SolrK
0 puntos

Hola Tengo un problema tras instalar Ubuntu 8.10 en mi servidor Dell power Edge 830 el sistema no carga simplemente me arroja el siguiente error.

Boot from (hd0 ,0) ext3 fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6
starting up ....
Loading, please wait ...

Gave up waiting for root device.
Common problems:
-Boot args( cat/proc/cmdline).
-check rootdelay=( did the system wait long enough?).
- check root= (did the system wait for the righ device?).
-Missing modules ( cat/proc/modules;ls/dev)
Alert!(/dev/disk/by-uuid/fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6 does not exist. Dropping to a shell!

BusyBox v1.10.2 (ubuntu 1:1.10.2-1ubuntu6) built in shell (ash)
Enter help for a lst of built in commands
(initramfs)
[90.051450] 8139cp 0000:06:00.0: this (id 10ec:8139 rev 10) is not an 8139+ compatiblechip
[90.051511] 8139cp 0000:06:00.0 try the 8139too driver instead

Ya corri desde un LiveCd para chekear los uuid en el fstab y en menu.lst de grub y esto fue lo que me devolvio.

fstab:

# /etc/fstab: static file system information.
#
#
proc /proc proc defaults 0 0
# /dev/sda1
UUID=fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6 / ext3 relatime,errors=remount-ro 0 1
# /dev/sda2
UUID=a2168780-de34-45aa-88b7-5e72feb9555c /home ext3 relatime 0 2
# /dev/sda3
UUID=f646e03e-f70a-4123-b92f-cb3f2f2fb9cf none swap sw 0 0
/dev/scd0 /media/cdrom0 udf,iso9660 user,noauto,exec,utf8 0 0

y el menu.lst de grub esto:

# menu.lst - See: grub(algooooo, info grub, update-grub(algooooo
# grub-install(algooooo, grub-floppy(algooooo,
# grub-md5-crypt, /usr/share/doc/grub
# and /usr/share/doc/grub-doc/.

## default num
# Set the default entry to the entry number NUM. Numbering starts from 0, and
# the entry number 0 is the default if the command is not used.
#
# You can specify 'saved' instead of a number. In this case, the default entry
# is the entry saved with the command 'savedefault'.
# WARNING: If you are using dmraid do not use 'savedefault' or your
# array will desync and will not let you boot your system.
default 0

## timeout sec
# Set a timeout, in SEC seconds, before automatically booting the default entry
# (normally the first entry defined).
timeout 3

## hiddenmenu
# Hides the menu by default (press ESC to see the menu)
hiddenmenu

# Pretty colours
#color cyan/blue white/blue

## password ['--md5'] passwd
# If used in the first section of a menu file, disable all interactive editing
# control (menu entry editor and command-line) and entries protected by the
# command 'lock'
# e.g. password topsecret
# password --md5 $1$gLhU0/$aW78kHK1QfV3P2b2znUoe/
# password topsecret

#
# examples
#
# title Windows 95/98/NT/2000
# root (hd0,0)
# makeactive
# chainloader +1
#
# title Linux
# root (hd0,1)
# kernel /vmlinuz root=/dev/hda2 ro
#

#
# Put static boot stanzas before and/or after AUTOMAGIC KERNEL LIST

### BEGIN AUTOMAGIC KERNELS LIST
## lines between the AUTOMAGIC KERNELS LIST markers will be modified
## by the debian update-grub script except for the default options below

## DO NOT UNCOMMENT THEM, Just edit them to your needs

## ## Start Default Options ##
## default kernel options
## default kernel options for automagic boot options
## If you want special options for specific kernels use kopt_x_y_z
## where x.y.z is kernel version. Minor versions can be omitted.
## e.g. kopt=root=/dev/hda1 ro
## kopt_2_6_8=root=/dev/hdc1 ro
## kopt_2_6_8_2_686=root=/dev/hdc2 ro
# kopt=root=UUID=fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6 ro

## default grub root device
## e.g. groot=(hd0,0)
# groot=fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6

## should update-grub create alternative automagic boot options
## e.g. alternative=true
## alternative=false
# alternative=true

## should update-grub lock alternative automagic boot options
## e.g. lockalternative=true
## lockalternative=false
# lockalternative=false

## additional options to use with the default boot option, but not with the
## alternatives
## e.g. defoptions=vga=791 resume=/dev/hda5
# defoptions=quiet splash

## should update-grub lock old automagic boot options
## e.g. lockold=false
## lockold=true
# lockold=false

## Xen hypervisor options to use with the default Xen boot option
# xenhopt=

## Xen Linux kernel options to use with the default Xen boot option
# xenkopt=console=tty0

## altoption boot targets option
## multiple altoptions lines are allowed
## e.g. altoptions=(extra menu suffix) extra boot options
## altoptions=(recovery) single
# altoptions=(recovery mode) single

## controls how many kernels should be put into the menu.lst
## only counts the first occurence of a kernel, not the
## alternative kernel options
## e.g. howmany=all
## howmany=7
# howmany=all

## should update-grub create memtest86 boot option
## e.g. memtest86=true
## memtest86=false
# memtest86=true

## should update-grub adjust the value of the default booted system
## can be true or false
# updatedefaultentry=false

## should update-grub add savedefault to the default options
## can be true or false
# savedefault=false

## ## End Default Options ##

title Ubuntu 8.10, kernel 2.6.27-7-generic
uuid fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6 ro quiet splash
initrd /boot/initrd.img-2.6.27-7-generic
quiet

title Ubuntu 8.10, kernel 2.6.27-7-generic (recovery mode)
uuid fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6
kernel /boot/vmlinuz-2.6.27-7-generic root=UUID=fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6 ro single
initrd /boot/initrd.img-2.6.27-7-generic

title Ubuntu 8.10, memtest86+
uuid fe89cff7-ed40-41d7-b96e-bb7fdf15d5c6
kernel /boot/memtest86+.bin
quiet

### END DEBIAN AUTOMAGIC KERNELS LIST

Comprobe que las uuid fueran correctas y lo eran, incluso he probado quitar las uuid y dejar el camino original es decir /dev/sda1 etc.. probe con la 8.04 pero ni sikiera se instala solo salta este mismo error asi que estoy perdido aki podria alguien hacerme alguna sugerencia para solucionar esto el problema es tanto con una desktop como server.