arranque lento

Imagen de syrcosie
0 puntos

Saludos,
he instalado ubuntu remix netbook 10.04 en un notebook Toshiba n305, procesador intel Atom N450 con 1 gb de ram y 250Gb de HD.Traía una partición con W7 que no he borrado y he hecho una instalación limpia desde una memoria usb.

Problema:
tarda mucho en arrancar, se queda con el cursor parpadeando luego de la selección de sistemas y si bien se termina cargando,el tiempo de espera supera los 5 minutos.

He reinstalado el grub2. También he vuelto a efectuar la instalación completa por si se tratara de un error en el origen y final de la partición en cuanto a los bloques, pero nada, sigue igual.

Una vez en marcha, el sistema funciona bien, rápido y sin problemas aparentes.

Si alguien sabe la causa de ésto, bueno, ya sabes, a escribir tocan...
Gracias

Imagen de sordoman
+1
0
-1

hola syrcosie

Pon esto en la consola y peganos aki la salida a ver si vemos algo


cat /var/log/dmesg

Suerte

+1
0
-1
Imagen de syrcosie
+1
0
-1

Hola Sordoman:
ahi va.A primera vista no he encontrado nada que pueda justificar el retardo, pero 4 ojos ven mas que dos. Gracias, suerte

[ 0.004481] ... version: 3
[ 0.004486] ... bit width: 40
[ 0.004490] ... generic registers: 2
[ 0.004495] ... value mask: 000000ffffffffff
[ 0.004500] ... max period: 000000007fffffff
[ 0.004505] ... fixed-purpose events: 3
[ 0.004509] ... event mask: 0000000700000003
[ 0.004518] Checking 'hlt' instruction... OK.
[ 0.020007] Disabling 4MB page tables to avoid TLB bug
[ 0.024282] ACPI: Core revision 20090903
[ 0.044018] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044030] ftrace: allocating 21771 entries in 43 pages
[ 0.048099] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048454] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.090727] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.092001] APIC calibration not consistent with PM-Timer: 301ms instead of 100ms
[ 0.092001] APIC delta adjusted to PM-Timer: 1039062 (3134101)
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.176131] CPU1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.176158] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180034] Brought up 2 CPUs
[ 0.180041] Total of 2 processors activated (6650.22 BogoMIPS).
[ 0.180275] CPU0 attaching sched-domain:
[ 0.180284] domain 0: span 0-1 level SIBLING
[ 0.180290] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.180302] domain 1: span 0-1 level MC
[ 0.180307] groups: 0-1 (cpu_power = 1178)
[ 0.180320] CPU1 attaching sched-domain:
[ 0.180324] domain 0: span 0-1 level SIBLING
[ 0.180329] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.180340] domain 1: span 0-1 level MC
[ 0.180345] groups: 0-1 (cpu_power = 1178)
[ 0.180566] devtmpfs: initialized
[ 0.180566] regulator: core version 0.5
[ 0.180566] Time: 15:19:05 Date: 05/17/10
[ 0.180566] NET: Registered protocol family 16
[ 0.180566] Trying to unpack rootfs image as initramfs...
[ 0.180566] EISA bus registered
[ 0.180566] ACPI: bus type pci registered
[ 0.180695] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.180705] PCI: MCFG area at e0000000 reserved in E820
[ 0.180710] PCI: Using MMCONFIG for extended config space
[ 0.180717] PCI: Using configuration type 1 for base access
[ 0.185306] bio: create slab at 0
[ 0.187847] ACPI: EC: Look up EC in DSDT
[ 0.200630] ACPI: Interpreter enabled
[ 0.200647] ACPI: (supports S0 S3 S4 S5)
[ 0.200707] ACPI: Using IOAPIC for interrupt routing
[ 0.252743] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.253396] ACPI: No dock devices found.
[ 0.256292] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.256313] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.256334] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.256409] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.256598] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0200000-0xf027ffff]
[ 0.256610] pci 0000:00:02.0: reg 14 io port: [0x18d0-0x18d7]
[ 0.256622] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.256634] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff]
[ 0.256695] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0280000-0xf02fffff]
[ 0.256837] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
[ 0.256916] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.256927] pci 0000:00:1b.0: PME# disabled
[ 0.257037] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.257047] pci 0000:00:1c.0: PME# disabled
[ 0.257158] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.257168] pci 0000:00:1c.1: PME# disabled
[ 0.257280] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.257290] pci 0000:00:1c.2: PME# disabled
[ 0.257374] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.257457] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.257540] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.257624] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.257717] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504000-0xf05043ff]
[ 0.257798] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.257809] pci 0000:00:1d.7: PME# disabled
[ 0.258071] pci 0000:00:1f.2: reg 10 io port: [0x18e8-0x18ef]
[ 0.258085] pci 0000:00:1f.2: reg 14 io port: [0x18dc-0x18df]
[ 0.258099] pci 0000:00:1f.2: reg 18 io port: [0x18e0-0x18e7]
[ 0.258113] pci 0000:00:1f.2: reg 1c io port: [0x18d8-0x18db]
[ 0.258127] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[ 0.258141] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504400-0xf05047ff]
[ 0.258186] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.258195] pci 0000:00:1f.2: PME# disabled
[ 0.258266] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[ 0.258375] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.258504] pci 0000:07:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[ 0.258628] pci 0000:07:00.0: supports D1
[ 0.258635] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 0.258648] pci 0000:07:00.0: PME# disabled
[ 0.258750] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.258934] pci 0000:09:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.259012] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xf0520000-0xf0520fff]
[ 0.259071] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xf0510000-0xf051ffff]
[ 0.259101] pci 0000:09:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.259262] pci 0000:09:00.0: supports D1 D2
[ 0.259270] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.259289] pci 0000:09:00.0: PME# disabled
[ 0.259447] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.259465] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.259538] pci 0000:00:1e.0: transparent bridge
[ 0.259583] pci_bus 0000:00: on NUMA node 0
[ 0.259602] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.259898] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.260125] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.260310] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.260502] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.260998] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.261018] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.280764] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.281062] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.281368] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.281653] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.281947] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.282256] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.282554] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.282849] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.283187] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.283219] vgaarb: loaded
[ 0.283531] SCSI subsystem initialized
[ 0.283768] libata version 3.00 loaded.
[ 0.284055] usbcore: registered new interface driver usbfs
[ 0.284097] usbcore: registered new interface driver hub
[ 0.284191] usbcore: registered new device driver usb
[ 0.284602] ACPI: WMI: Mapper loaded
[ 0.284610] PCI: Using ACPI for IRQ routing
[ 0.284621] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.284655] pci 0000:00:1b.0: BAR 0: address space collision on of device [0xf0500000-0xf0503fff]
[ 0.284664] pci 0000:00:1b.0: BAR 0: can't allocate resource
[ 0.284701] pci 0000:00:1d.7: BAR 0: address space collision on of device [0xf0504000-0xf05043ff]
[ 0.284709] pci 0000:00:1d.7: BAR 0: can't allocate resource
[ 0.284733] pci 0000:00:1f.2: BAR 5: address space collision on of device [0xf0504400-0xf05047ff]
[ 0.284742] pci 0000:00:1f.2: BAR 5: can't allocate resource
[ 0.285070] NetLabel: Initializing
[ 0.285076] NetLabel: domain hash size = 128
[ 0.285081] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.285113] NetLabel: unlabeled traffic allowed by default
[ 0.285210] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.285226] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.288177] Switching to clocksource tsc
[ 0.292688] AppArmor: AppArmor Filesystem Enabled
[ 0.292724] pnp: PnP ACPI init
[ 0.292761] ACPI: bus type pnp registered
[ 0.508445] pnp: PnP ACPI: found 8 devices
[ 0.508454] ACPI: ACPI bus type pnp unregistered
[ 0.508463] PnPBIOS: Disabled by ACPI PNP
[ 0.508500] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.508510] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.508520] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.508530] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.508541] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.508551] system 00:01: ioport range 0x164e-0x174c has been reserved
[ 0.508562] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.508573] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.508584] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.508594] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.543776] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.543789] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.543802] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.543813] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.543826] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:07
[ 0.543835] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.543846] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.543857] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.543873] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09
[ 0.543881] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.543892] pci 0000:00:1c.2: MEM window: 0x40600000-0x409fffff
[ 0.543903] pci 0000:00:1c.2: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.543917] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
[ 0.543923] pci 0000:00:1e.0: IO window: disabled
[ 0.543933] pci 0000:00:1e.0: MEM window: disabled
[ 0.543942] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.543970] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.543989] alloc irq_desc for 16 on node -1
[ 0.543997] alloc kstat_irqs on node -1
[ 0.544016] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.544031] pci 0000:00:1c.0: setting latency timer to 64
[ 0.544055] alloc irq_desc for 17 on node -1
[ 0.544061] alloc kstat_irqs on node -1
[ 0.544073] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.544083] pci 0000:00:1c.1: setting latency timer to 64
[ 0.544100] alloc irq_desc for 18 on node -1
[ 0.544106] alloc kstat_irqs on node -1
[ 0.544117] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.544127] pci 0000:00:1c.2: setting latency timer to 64
[ 0.544142] pci 0000:00:1e.0: setting latency timer to 64
[ 0.544153] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.544162] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.544170] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 0.544179] pci_bus 0000:05: resource 1 mem: [0x40000000-0x401fffff]
[ 0.544187] pci_bus 0000:05: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.544196] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff]
[ 0.544204] pci_bus 0000:07: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.544213] pci_bus 0000:07: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.544221] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
[ 0.544229] pci_bus 0000:09: resource 1 mem: [0x40600000-0x409fffff]
[ 0.544238] pci_bus 0000:09: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.544247] pci_bus 0000:11: resource 3 io: [0x00-0xffff]
[ 0.544255] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffff]
[ 0.544345] NET: Registered protocol family 2
[ 0.544611] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.545479] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.546635] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.547216] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.547227] TCP reno registered
[ 0.547472] NET: Registered protocol family 1
[ 0.547523] pci 0000:00:02.0: Boot video device
[ 0.547735] Simple Boot Flag at 0x35 set to 0x1
[ 0.548211] cpufreq-nforce2: No nForce2 chipset.
[ 0.548285] Scanning for low memory corruption every 60 seconds
[ 0.548606] audit: initializing netlink socket (disabled)
[ 0.548633] type=2000 audit(1274109544.546:1): initialized
[ 0.569273] highmem bounce pool size: 64 pages
[ 0.569290] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.574216] VFS: Disk quotas dquot_6.5.2
[ 0.574400] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.576325] fuse init (API version 7.13)
[ 0.576605] msgmni has been set to 1716
[ 0.577250] alg: No test for stdrng (krng)
[ 0.577450] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.577460] io scheduler noop registered
[ 0.577466] io scheduler anticipatory registered
[ 0.577472] io scheduler deadline registered
[ 0.577603] io scheduler cfq registered (default)
[ 0.577905] alloc irq_desc for 24 on node -1
[ 0.577912] alloc kstat_irqs on node -1
[ 0.577933] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.577950] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.578205] alloc irq_desc for 25 on node -1
[ 0.578214] alloc kstat_irqs on node -1
[ 0.578232] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.578248] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.578495] alloc irq_desc for 26 on node -1
[ 0.578501] alloc kstat_irqs on node -1
[ 0.578518] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.578533] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.578740] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.579071] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.579092] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.579442] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.579460] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.579785] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.579803] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.580198] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.580217] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.580543] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.580561] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.580903] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.580922] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142a0), AE_ALREADY_EXISTS
[ 0.581048] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.581615] ACPI: AC Adapter [ACAD] (on-line)
[ 0.581870] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input0
[ 0.581980] ACPI: Lid Switch [LID0]
[ 0.582121] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1
[ 0.582131] ACPI: Power Button [PWRB]
[ 0.582269] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.582278] ACPI: Power Button [PWRF]
[ 0.583925] ACPI: SSDT 3f5d5de4 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.585202] ACPI: SSDT 3f5d577a 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.591793] Monitor-Mwait will be used to enter C-1 state
[ 0.591902] Monitor-Mwait will be used to enter C-2 state
[ 0.591989] Monitor-Mwait will be used to enter C-3 state
[ 0.592010] Marking TSC unstable due to TSC halts in idle
[ 0.592171] processor LNXCPU:00: registered as cooling_device0
[ 0.593217] ACPI: SSDT 3f5d5fe7 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.594183] ACPI: SSDT 3f5d5d5f 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.595858] Switching to clocksource hpet
[ 0.597042] processor LNXCPU:01: registered as cooling_device1
[ 0.608852] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.612756] brd: module loaded
[ 0.614320] loop: module loaded
[ 0.614594] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.615864] Fixed MDIO Bus: probed
[ 0.615988] PPP generic driver version 2.4.2
[ 0.616118] tun: Universal TUN/TAP device driver, 1.6
[ 0.616125] tun: (C) 1999-2004 Max Krasnyansky
[ 0.616378] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.616439] alloc irq_desc for 23 on node -1
[ 0.616446] alloc kstat_irqs on node -1
[ 0.616464] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.616503] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.616512] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.616614] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.616654] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.616674] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.620565] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.620870] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40a04000
[ 0.624892] isapnp: Scanning for PnP cards...
[ 0.674033] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.674343] usb usb1: configuration #1 chosen from 1 choice
[ 0.674440] hub 1-0:1.0: USB hub found
[ 0.674463] hub 1-0:1.0: 8 ports detected
[ 0.674663] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.674712] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.674794] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.674811] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.674821] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.674945] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.674990] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.675258] usb usb2: configuration #1 chosen from 1 choice
[ 0.675351] hub 2-0:1.0: USB hub found
[ 0.675372] hub 2-0:1.0: 2 ports detected
[ 0.675505] alloc irq_desc for 19 on node -1
[ 0.675512] alloc kstat_irqs on node -1
[ 0.675527] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.675542] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.675551] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.675659] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.675714] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.675993] usb usb3: configuration #1 chosen from 1 choice
[ 0.676077] hub 3-0:1.0: USB hub found
[ 0.676101] hub 3-0:1.0: 2 ports detected
[ 0.676221] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.676237] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.676247] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.676357] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.676423] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.676701] usb usb4: configuration #1 chosen from 1 choice
[ 0.676784] hub 4-0:1.0: USB hub found
[ 0.676803] hub 4-0:1.0: 2 ports detected
[ 0.676920] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.676936] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.676944] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.677086] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.677145] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.677420] usb usb5: configuration #1 chosen from 1 choice
[ 0.677504] hub 5-0:1.0: USB hub found
[ 0.677524] hub 5-0:1.0: 2 ports detected
[ 0.677769] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.708623] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.708684] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.709143] mice: PS/2 mouse device common for all mice
[ 0.709500] rtc_cmos 00:04: RTC can wake from S4
[ 0.709607] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.709656] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.709975] device-mapper: uevent: version 1.0.3
[ 0.750984] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.753818] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.797851] device-mapper: multipath: version 1.1.0 loaded
[ 0.797862] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.834335] Freeing initrd memory: 7780k freed
[ 0.840964] EISA: Probing bus 0 at eisa.0
[ 0.840977] Cannot allocate resource for EISA slot 1
[ 0.840985] Cannot allocate resource for EISA slot 2
[ 0.840991] Cannot allocate resource for EISA slot 3
[ 0.840997] Cannot allocate resource for EISA slot 4
[ 0.841022] EISA: Detected 0 cards.
[ 0.841490] cpuidle: using governor ladder
[ 0.841793] cpuidle: using governor menu
[ 0.843008] TCP cubic registered
[ 0.843476] NET: Registered protocol family 10
[ 0.844984] lo: Disabled Privacy Extensions
[ 0.845867] NET: Registered protocol family 17
[ 0.846992] Using IPI No-Shortcut mode
[ 0.847217] PM: Resume from disk failed.
[ 0.847256] registered taskstats version 1
[ 0.847935] Magic number: 10:133:336
[ 0.847968] tty tty57: hash matches
[ 0.848162] rtc_cmos 00:04: setting system clock to 2010-05-17 15:19:06 UTC (1274109546)
[ 0.848171] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.848176] EDD information not available.
[ 0.884618] ACPI: Battery Slot [BAT1] (battery present)
[ 1.015927] isapnp: No Plug & Play device found
[ 1.016709] Freeing unused kernel memory: 656k freed
[ 1.017223] Write protecting the kernel text: 4676k
[ 1.017296] Write protecting the kernel read-only data: 1840k
[ 1.053068] udev: starting version 151
[ 1.092170] usb 1-4: new high speed USB device using ehci_hcd and address 3
[ 1.349587] ahci 0000:00:1f.2: version 3.0
[ 1.349622] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.349699] alloc irq_desc for 27 on node -1
[ 1.349706] alloc kstat_irqs on node -1
[ 1.349727] ahci 0000:00:1f.2: irq 27 for MSI/MSI-X
[ 1.349847] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.349859] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.349871] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.350439] scsi0 : ahci
[ 1.351295] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.351354] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.351467] r8169 0000:09:00.0: setting latency timer to 64
[ 1.351623] alloc irq_desc for 28 on node -1
[ 1.351631] alloc kstat_irqs on node -1
[ 1.351679] r8169 0000:09:00.0: irq 28 for MSI/MSI-X
[ 1.353579] eth0: RTL8102e at 0xf8092000, 70:5a:b6:70:7e:b3, XID 04e00000 IRQ 28
[ 1.355800] scsi1 : ahci
[ 1.356056] scsi2 : ahci
[ 1.356283] scsi3 : ahci
[ 1.356708] ata1: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04500 irq 27
[ 1.356720] ata2: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04580 irq 27
[ 1.356730] ata3: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04600 irq 27
[ 1.356739] ata4: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04680 irq 27
[ 1.479033] usb 1-4: configuration #1 chosen from 1 choice
[ 1.500712] Initializing USB Mass Storage driver...
[ 1.500972] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.501204] usbcore: registered new interface driver usb-storage
[ 1.501215] USB Mass Storage support registered.
[ 1.501233] usb-storage: device found at 3
[ 1.501239] usb-storage: waiting for device to settle before scanning
[ 1.596088] usb 1-8: new high speed USB device using ehci_hcd and address 4
[ 1.676077] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.676110] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.676136] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.676160] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.732909] usb 1-8: configuration #1 chosen from 1 choice
[ 1.757059] ata1.00: ATA-8: TOSHIBA MK2555GSX, FG001M, max UDMA/100
[ 1.757068] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.765095] ata1.00: configured for UDMA/100
[ 1.780274] scsi 0:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[ 1.780657] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.781067] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.781206] sd 0:0:0:0: [sda] Write Protect is off
[ 1.781214] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.781284] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.781648] sda: sda1 sda2 sda3 < sda5 sda6 >
[ 1.889518] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.972096] usb 2-1: new low speed USB device using uhci_hcd and address 2
[ 2.148288] usb 2-1: configuration #1 chosen from 1 choice
[ 2.180036] usbcore: registered new interface driver hiddev
[ 2.193528] input: Acrox USB & PS/2 Mouse as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1:1.0/input/input5
[ 2.193748] generic-usb 0003:0F62:1001.0001: input,hidraw0: USB HID v1.10 Mouse [Acrox USB & PS/2 Mouse] on usb-0000:00:1d.0-1/input0
[ 2.193798] usbcore: registered new interface driver usbhid
[ 2.193806] usbhid: v2.6:USB HID core driver
[ 6.140801] EXT4-fs (sda6): mounted filesystem with ordered data mode
[ 6.500439] usb-storage: device scan complete
[ 6.503151] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.504350] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.508996] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 70.190752] Adding 2547704k swap on /dev/sda5. Priority:-1 extents:1 across:2547704k
[ 70.235302] udev: starting version 151
[ 70.367377] lp: driver loaded but no devices found
[ 70.904747] Linux agpgart interface v0.103
[ 71.042720] [drm] Initialized drm 1.1.0 20060810
[ 71.130811] Linux video capture interface: v2.00
[ 71.172837] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 71.173197] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 71.188169] type=1505 audit(1274102416.839:2): operation="profile_load" pid=600 name="/sbin/dhclient3"
[ 71.188931] type=1505 audit(1274102416.839:3): operation="profile_load" pid=600 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 71.189363] type=1505 audit(1274102416.839:4): operation="profile_load" pid=600 name="/usr/lib/connman/scripts/dhclient-script"
[ 71.215907] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 71.226112] uvcvideo: Found UVC 1.00 device USB 2.0 PC Cam (090c:e37b)
[ 71.232796] input: USB 2.0 PC Cam as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input6
[ 71.233379] usbcore: registered new interface driver uvcvideo
[ 71.233954] USB Video Class driver (v0.1.0)
[ 71.285120] cfg80211: Calling CRDA to update world regulatory domain
[ 71.420130] cfg80211: World regulatory domain updated:
[ 71.420142] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 71.420152] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 71.420160] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 71.420169] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 71.420178] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 71.420187] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 71.485209] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 71.485222] i915 0000:00:02.0: setting latency timer to 64
[ 71.500640] alloc irq_desc for 29 on node -1
[ 71.500650] alloc kstat_irqs on node -1
[ 71.500669] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 71.500684] [drm] set up 7M of stolen space
[ 71.527314] ath9k 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 71.527348] ath9k 0000:07:00.0: setting latency timer to 64
[ 71.576662] ath: EEPROM regdomain: 0x65
[ 71.576668] ath: EEPROM indicates we should expect a direct regpair map
[ 71.576677] ath: Country alpha2 being used: 00
[ 71.576683] ath: Regpair used: 0x65
[ 71.612418] [drm] initialized overlay support
[ 71.726986] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 71.728716] Registered led device: ath9k-phy0::radio
[ 71.728761] Registered led device: ath9k-phy0::assoc
[ 71.728804] Registered led device: ath9k-phy0::tx
[ 71.728846] Registered led device: ath9k-phy0::rx
[ 71.728890] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf82e0000, irq=17
[ 71.989274] type=1505 audit(1274102417.639:5): operation="profile_replace" pid=725 name="/sbin/dhclient3"
[ 71.990021] type=1505 audit(1274102417.639:6): operation="profile_replace" pid=725 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 71.993944] type=1505 audit(1274102417.643:7): operation="profile_replace" pid=725 name="/usr/lib/connman/scripts/dhclient-script"
[ 72.013656] type=1505 audit(1274102417.663:8): operation="profile_load" pid=726 name="/usr/bin/evince"
[ 72.025410] type=1505 audit(1274102417.675:9): operation="profile_load" pid=726 name="/usr/bin/evince-previewer"
[ 72.031597] type=1505 audit(1274102417.679:10): operation="profile_load" pid=726 name="/usr/bin/evince-thumbnailer"
[ 72.037764] fb0: inteldrmfb frame buffer device
[ 72.037771] registered panic notifier
[ 72.037809] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 72.037900] alloc irq_desc for 22 on node -1
[ 72.037907] alloc kstat_irqs on node -1
[ 72.037925] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 72.037996] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 72.052557] vga16fb: initializing
[ 72.052569] vga16fb: mapped to 0xc00a0000
[ 72.052580] vga16fb: not registering due to another framebuffer present
[ 72.069609] type=1505 audit(1274102417.719:11): operation="profile_load" pid=730 name="/usr/lib/cups/backend/cups-pdf"
[ 72.133688] [drm] Big FIFO is enabled
[ 72.205051] [drm] Big FIFO is enabled
[ 72.205071] [drm] Big FIFO is enabled
[ 72.265838] hda_codec: ALC272: BIOS auto-probing.
[ 72.267192] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input7
[ 72.437281] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 72.461440] r8169: eth0: link down
[ 72.462065] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 72.477438] [drm] Big FIFO is enabled
[ 72.509096] [drm] Big FIFO is enabled
[ 72.511168] Console: switching to colour frame buffer device 128x37
[ 72.514154] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000
[ 72.532322] [drm] Big FIFO is enabled
[ 72.726507] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8

+1
0
-1
Imagen de sordoman
+1
0
-1

hola syrcosie

Mis 2 ojos han encontrado esto:

[ 6.503151] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.504350] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.508996] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 70.190752] Adding 2547704k swap on /dev/sda5. Priority:-1 extents:1 across:2547704k

Si te fijas pasas del segundo 6.5 al 70.1 aki tienes almenos 1 minuto de arranque.

Por lo ke parece tienes algo en el lector de tarjetas o alguna tarjeta , adaptador etc... ke ralentiza el arraque

Repasalo y vuelve a probar a ver ke tal

suerte

+1
0
-1
Imagen de syrcosie
+1
0
-1

Buenas, Sordoman

he revisado el lector de tarjetas, adaptadores etc y nada. Todo está bien. Pero mirando el listado me he dado cuenta que he asignado a swap un tamaño de 2.6 Gb que quizá es excesivo.

He intentado bajarme gparted pero por alguna razón synaptics o mejor dicho los repositorios quedan bloqueados no sé porqué razón referente a los paquetes de idiomas y por eso no he podido probarlo disminuyendo el tamaño de swap. ¿Piensas que puede ser esa la razón?
Gracias por tu interés.

Saludos

+1
0
-1
Imagen de sordoman
+1
0
-1

Holas de nuevo syrcosie

En principio, el tamaño de la swap no tendria ke afectar en nada, por lo ke yo entiendo, hay algun dispositivo tipo, lector de tarjetas, HD, o algun dispositivo por usb, ke te relentiza el arranque, no se si tienes alguna cosa conectada por usb, pero primero mira de desconectarlo todo, sacar tarjetas de memoria o lo ke tengas coenctado, y pruebalo otra vez.

Suerte

+1
0
-1
Imagen de syrcosie
+1
0
-1

Sordoman, hola

bueno, finalmente como no conseguí nada con los periféricos usb, ya que no tenía nada conectado, decidí probar con lo del cambio de swap. Pero como te dije, no podía hacerlo a través de gparted porque por algún problema con los repositorios no lo pude bajar, así que lo instalé de nuevo modificando el tamaño de swap a 600mb y voilá, funciona.

Por si quedara alguna duda en cuanto que la instalación nueva hubiera arreglado el problema de los periféricos, he de decirte que ya lo había intentado antes con la misma swap (2.6 Gb) y seguía con el mismo problema.

Revisando el registro ~/log/dmesg aquel salto que se producía entre 6.0 y 70 ya no está. Si recuerdas, en aquel, el 71 comenzaba precisamente con la asignación de la memoria swap.
En cualquier caso, seguiré investigando mas a fondo, ahora ya por simple curiosidad.

Te agradezco mucho tu interés y es mi deseo poder retribuirte de la misma forma si se presenta la ocasión. Gracias

Un saludo

S.

+1
0
-1
Imagen de sordoman
+1
0
-1

Hola syrcosie

Pues la verdad estoy muy sorpendido, ke una asignacion de 2,6gb de swap proboque esto...

Pues nada si descubres alguna cosa hazlo saber, ke asi aprenderé alguna cosa nueva

suerte

+1
0
-1
Imagen de fabiruchis75
+1
0
-1

Hola, tengo el mismo problema.

En mi caso yo si eliminé la partición que traía del Windows 7, y realicé lo siguiente:

Instalación completa desde dispositivo usb y sin conexión a internet; con tamaño de swap de 600 mb. y el problema continua.

Gracias por la ayuda.

cat /var/log/dmesg

[ 0.004405] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.004412] CPU: L2 cache: 512K
[ 0.004417] CPU: Physical Processor ID: 0
[ 0.004421] CPU: Processor Core ID: 0
[ 0.004428] mce: CPU supports 5 MCE banks
[ 0.004443] CPU0: Thermal monitoring handled by SMI
[ 0.004451] using mwait in idle threads.
[ 0.004461] Performance Events: Atom events, Intel PMU driver.
[ 0.004478] ... version: 3
[ 0.004482] ... bit width: 40
[ 0.004486] ... generic registers: 2
[ 0.004491] ... value mask: 000000ffffffffff
[ 0.004496] ... max period: 000000007fffffff
[ 0.004501] ... fixed-purpose events: 3
[ 0.004505] ... event mask: 0000000700000003
[ 0.004514] Checking 'hlt' instruction... OK.
[ 0.020007] Disabling 4MB page tables to avoid TLB bug
[ 0.024274] ACPI: Core revision 20090903
[ 0.044018] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044029] ftrace: allocating 21771 entries in 43 pages
[ 0.048097] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048452] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.091523] CPU0: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.092001] APIC calibration not consistent with PM-Timer: 299ms instead of 100ms
[ 0.092001] APIC delta adjusted to PM-Timer: 1039061 (3117142)
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM1)
[ 0.176122] CPU1: Intel(R) Atom(TM) CPU N450 @ 1.66GHz stepping 0a
[ 0.176148] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180034] Brought up 2 CPUs
[ 0.180041] Total of 2 processors activated (6650.01 BogoMIPS).
[ 0.180276] CPU0 attaching sched-domain:
[ 0.180285] domain 0: span 0-1 level SIBLING
[ 0.180290] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.180302] domain 1: span 0-1 level MC
[ 0.180308] groups: 0-1 (cpu_power = 1178)
[ 0.180320] CPU1 attaching sched-domain:
[ 0.180324] domain 0: span 0-1 level SIBLING
[ 0.180329] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.180340] domain 1: span 0-1 level MC
[ 0.180345] groups: 0-1 (cpu_power = 1178)
[ 0.180565] devtmpfs: initialized
[ 0.180565] regulator: core version 0.5
[ 0.180565] Time: 15:23:14 Date: 06/20/10
[ 0.180565] NET: Registered protocol family 16
[ 0.180565] Trying to unpack rootfs image as initramfs...
[ 0.180565] EISA bus registered
[ 0.180565] ACPI: bus type pci registered
[ 0.180694] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.180703] PCI: MCFG area at e0000000 reserved in E820
[ 0.180709] PCI: Using MMCONFIG for extended config space
[ 0.180715] PCI: Using configuration type 1 for base access
[ 0.185455] bio: create slab at 0
[ 0.187978] ACPI: EC: Look up EC in DSDT
[ 0.200629] ACPI: Interpreter enabled
[ 0.200645] ACPI: (supports S0 S3 S4 S5)
[ 0.200706] ACPI: Using IOAPIC for interrupt routing
[ 0.252726] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.253382] ACPI: No dock devices found.
[ 0.256275] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.256295] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.256316] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error
[ 0.256394] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.256585] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0200000-0xf027ffff]
[ 0.256597] pci 0000:00:02.0: reg 14 io port: [0x18d0-0x18d7]
[ 0.256609] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.256621] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0000000-0xf00fffff]
[ 0.256681] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0280000-0xf02fffff]
[ 0.256821] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0500000-0xf0503fff]
[ 0.256892] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.256902] pci 0000:00:1b.0: PME# disabled
[ 0.257012] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.257024] pci 0000:00:1c.0: PME# disabled
[ 0.257140] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.257150] pci 0000:00:1c.1: PME# disabled
[ 0.257261] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.257270] pci 0000:00:1c.2: PME# disabled
[ 0.257353] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.257435] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.257521] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.257605] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.257694] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0504000-0xf05043ff]
[ 0.257773] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.257783] pci 0000:00:1d.7: PME# disabled
[ 0.258042] pci 0000:00:1f.2: reg 10 io port: [0x18e8-0x18ef]
[ 0.258057] pci 0000:00:1f.2: reg 14 io port: [0x18dc-0x18df]
[ 0.258071] pci 0000:00:1f.2: reg 18 io port: [0x18e0-0x18e7]
[ 0.258084] pci 0000:00:1f.2: reg 1c io port: [0x18d8-0x18db]
[ 0.258098] pci 0000:00:1f.2: reg 20 io port: [0x18c0-0x18cf]
[ 0.258113] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0504400-0xf05047ff]
[ 0.258158] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.258167] pci 0000:00:1f.2: PME# disabled
[ 0.258242] pci 0000:00:1f.3: reg 20 io port: [0x18a0-0x18bf]
[ 0.258349] pci 0000:00:1c.0: bridge io port: [0x00-0xfff]
[ 0.258472] pci 0000:07:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[ 0.258599] pci 0000:07:00.0: supports D1
[ 0.258606] pci 0000:07:00.0: PME# supported from D0 D1 D3hot
[ 0.258619] pci 0000:07:00.0: PME# disabled
[ 0.258716] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.258902] pci 0000:09:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.258984] pci 0000:09:00.0: reg 18 64bit mmio pref: [0xf0520000-0xf0520fff]
[ 0.259043] pci 0000:09:00.0: reg 20 64bit mmio pref: [0xf0510000-0xf051ffff]
[ 0.259076] pci 0000:09:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.259240] pci 0000:09:00.0: supports D1 D2
[ 0.259247] pci 0000:09:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.259264] pci 0000:09:00.0: PME# disabled
[ 0.259422] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.259438] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.259511] pci 0000:00:1e.0: transparent bridge
[ 0.259554] pci_bus 0000:00: on NUMA node 0
[ 0.259572] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.259879] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP1._PRT]
[ 0.260095] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP2._PRT]
[ 0.260278] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.EXP3._PRT]
[ 0.260479] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.260970] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.260990] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.285740] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 *7 10 11 12 14 15)
[ 0.286040] ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.286335] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 *5 6 7 10 11 12 14 15)
[ 0.286618] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 *10 11 12 14 15)
[ 0.286915] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.287221] ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 10 11 12 14 15) *0, disabled.
[ 0.287522] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.287816] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 10 *11 12 14 15)
[ 0.288193] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.288225] vgaarb: loaded
[ 0.288539] SCSI subsystem initialized
[ 0.288801] libata version 3.00 loaded.
[ 0.289046] usbcore: registered new interface driver usbfs
[ 0.289087] usbcore: registered new interface driver hub
[ 0.289178] usbcore: registered new device driver usb
[ 0.289581] ACPI: WMI: Mapper loaded
[ 0.289588] PCI: Using ACPI for IRQ routing
[ 0.289599] pci 0000:00:1c.0: BAR 13: can't allocate resource
[ 0.289631] pci 0000:00:1b.0: BAR 0: address space collision on of device [0xf0500000-0xf0503fff]
[ 0.289640] pci 0000:00:1b.0: BAR 0: can't allocate resource
[ 0.289678] pci 0000:00:1d.7: BAR 0: address space collision on of device [0xf0504000-0xf05043ff]
[ 0.289688] pci 0000:00:1d.7: BAR 0: can't allocate resource
[ 0.289711] pci 0000:00:1f.2: BAR 5: address space collision on of device [0xf0504400-0xf05047ff]
[ 0.289719] pci 0000:00:1f.2: BAR 5: can't allocate resource
[ 0.290050] NetLabel: Initializing
[ 0.290057] NetLabel: domain hash size = 128
[ 0.290062] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.290094] NetLabel: unlabeled traffic allowed by default
[ 0.290191] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.290206] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.300247] Switching to clocksource tsc
[ 0.304682] AppArmor: AppArmor Filesystem Enabled
[ 0.304725] pnp: PnP ACPI init
[ 0.304762] ACPI: bus type pnp registered
[ 0.328267] pnp: PnP ACPI: found 8 devices
[ 0.328277] ACPI: ACPI bus type pnp unregistered
[ 0.328287] PnPBIOS: Disabled by ACPI PNP
[ 0.328330] system 00:01: ioport range 0x800-0x80f has been reserved
[ 0.328341] system 00:01: ioport range 0x1000-0x107f has been reserved
[ 0.328350] system 00:01: ioport range 0x1180-0x11bf has been reserved
[ 0.328360] system 00:01: ioport range 0x4d0-0x4d1 has been reserved
[ 0.328371] system 00:01: ioport range 0xfe00-0xfe00 has been reserved
[ 0.328381] system 00:01: ioport range 0x164e-0x174c has been reserved
[ 0.328392] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.328402] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.328413] system 00:01: iomem range 0xf8000000-0xfbffffff has been reserved
[ 0.328424] system 00:01: iomem range 0xfef00000-0xfeffffff has been reserved
[ 0.363588] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:05
[ 0.363600] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.363612] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.363624] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.363638] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:07
[ 0.363647] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.363659] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.363669] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.363685] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:09
[ 0.363694] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.363706] pci 0000:00:1c.2: MEM window: 0x40600000-0x409fffff
[ 0.363717] pci 0000:00:1c.2: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.363733] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:11
[ 0.363740] pci 0000:00:1e.0: IO window: disabled
[ 0.363751] pci 0000:00:1e.0: MEM window: disabled
[ 0.363761] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.363789] pci 0000:00:1c.0: enabling device (0000 -> 0003)
[ 0.363805] alloc irq_desc for 16 on node -1
[ 0.363812] alloc kstat_irqs on node -1
[ 0.363830] pci 0000:00:1c.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 0.363843] pci 0000:00:1c.0: setting latency timer to 64
[ 0.363866] alloc irq_desc for 17 on node -1
[ 0.363872] alloc kstat_irqs on node -1
[ 0.363883] pci 0000:00:1c.1: PCI INT B -> GSI 17 (level, low) -> IRQ 17
[ 0.363894] pci 0000:00:1c.1: setting latency timer to 64
[ 0.363911] alloc irq_desc for 18 on node -1
[ 0.363917] alloc kstat_irqs on node -1
[ 0.363928] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.363938] pci 0000:00:1c.2: setting latency timer to 64
[ 0.363952] pci 0000:00:1e.0: setting latency timer to 64
[ 0.363964] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.363972] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.363981] pci_bus 0000:05: resource 0 io: [0x3000-0x3fff]
[ 0.363989] pci_bus 0000:05: resource 1 mem: [0x40000000-0x401fffff]
[ 0.363998] pci_bus 0000:05: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.364006] pci_bus 0000:07: resource 0 io: [0x4000-0x4fff]
[ 0.364014] pci_bus 0000:07: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.364023] pci_bus 0000:07: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.364031] pci_bus 0000:09: resource 0 io: [0x2000-0x2fff]
[ 0.364040] pci_bus 0000:09: resource 1 mem: [0x40600000-0x409fffff]
[ 0.364048] pci_bus 0000:09: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.364057] pci_bus 0000:11: resource 3 io: [0x00-0xffff]
[ 0.364065] pci_bus 0000:11: resource 4 mem: [0x000000-0xffffffff]
[ 0.364156] NET: Registered protocol family 2
[ 0.364421] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.365288] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.366434] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.366989] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.367000] TCP reno registered
[ 0.367244] NET: Registered protocol family 1
[ 0.367295] pci 0000:00:02.0: Boot video device
[ 0.367492] Simple Boot Flag at 0x35 set to 0x1
[ 0.367976] cpufreq-nforce2: No nForce2 chipset.
[ 0.368050] Scanning for low memory corruption every 60 seconds
[ 0.368371] audit: initializing netlink socket (disabled)
[ 0.368397] type=2000 audit(1277047394.366:1): initialized
[ 0.389008] highmem bounce pool size: 64 pages
[ 0.389023] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.393955] VFS: Disk quotas dquot_6.5.2
[ 0.394139] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.396094] fuse init (API version 7.13)
[ 0.396366] msgmni has been set to 1716
[ 0.397015] alg: No test for stdrng (krng)
[ 0.397204] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.397215] io scheduler noop registered
[ 0.397221] io scheduler anticipatory registered
[ 0.397226] io scheduler deadline registered
[ 0.397360] io scheduler cfq registered (default)
[ 0.397658] alloc irq_desc for 24 on node -1
[ 0.397666] alloc kstat_irqs on node -1
[ 0.397686] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.397703] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.397941] alloc irq_desc for 25 on node -1
[ 0.397948] alloc kstat_irqs on node -1
[ 0.397966] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.397984] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.398240] alloc irq_desc for 26 on node -1
[ 0.398247] alloc kstat_irqs on node -1
[ 0.398263] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.398279] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.398491] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.398817] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.398839] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.399197] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.399216] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.399541] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.399559] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.399958] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.399977] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.400306] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.400324] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.400650] ACPI Error (dsfield-0143): [CAPB] Namespace lookup failure, AE_ALREADY_EXISTS
[ 0.400670] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node f70142b8), AE_ALREADY_EXISTS
[ 0.400803] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.401345] ACPI: AC Adapter [ACAD] (on-line)
[ 0.401613] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/device:0c/PNP0C0D:00/input/input0
[ 0.401731] ACPI: Lid Switch [LID0]
[ 0.401877] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/PNP0C0C:00/input/input1
[ 0.401887] ACPI: Power Button [PWRB]
[ 0.402024] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.402032] ACPI: Power Button [PWRF]
[ 0.403647] ACPI: SSDT 3f5d5ddc 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.404891] ACPI: SSDT 3f5d5772 005E5 (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.411376] Monitor-Mwait will be used to enter C-1 state
[ 0.411481] Monitor-Mwait will be used to enter C-2 state
[ 0.411565] Monitor-Mwait will be used to enter C-3 state
[ 0.411586] Marking TSC unstable due to TSC halts in idle
[ 0.411752] processor LNXCPU:00: registered as cooling_device0
[ 0.412751] ACPI: SSDT 3f5d5fdf 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.413677] ACPI: SSDT 3f5d5d57 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.415326] Switching to clocksource hpet
[ 0.416696] processor LNXCPU:01: registered as cooling_device1
[ 0.448766] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.452718] brd: module loaded
[ 0.454240] loop: module loaded
[ 0.454509] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.455787] Fixed MDIO Bus: probed
[ 0.455956] PPP generic driver version 2.4.2
[ 0.456095] tun: Universal TUN/TAP device driver, 1.6
[ 0.456102] tun: (C) 1999-2004 Max Krasnyansky
[ 0.456344] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.456399] alloc irq_desc for 23 on node -1
[ 0.456406] alloc kstat_irqs on node -1
[ 0.456423] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.456459] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.456468] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.456589] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.456630] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.456652] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.460547] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.460818] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x40a04000
[ 0.464800] isapnp: Scanning for PnP cards...
[ 0.484577] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.484873] usb usb1: configuration #1 chosen from 1 choice
[ 0.484957] hub 1-0:1.0: USB hub found
[ 0.484980] hub 1-0:1.0: 8 ports detected
[ 0.485146] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.485200] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.485278] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.485294] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.485303] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.485408] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.485451] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.485698] usb usb2: configuration #1 chosen from 1 choice
[ 0.485781] hub 2-0:1.0: USB hub found
[ 0.485799] hub 2-0:1.0: 2 ports detected
[ 0.485916] alloc irq_desc for 19 on node -1
[ 0.485923] alloc kstat_irqs on node -1
[ 0.485937] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.485954] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.485963] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.486049] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.486101] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.486330] usb usb3: configuration #1 chosen from 1 choice
[ 0.486404] hub 3-0:1.0: USB hub found
[ 0.486421] hub 3-0:1.0: 2 ports detected
[ 0.486525] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.486539] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.486547] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.486630] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.486681] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.486920] usb usb4: configuration #1 chosen from 1 choice
[ 0.486994] hub 4-0:1.0: USB hub found
[ 0.487012] hub 4-0:1.0: 2 ports detected
[ 0.487115] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.487129] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.487137] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.487232] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.487282] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.487519] usb usb5: configuration #1 chosen from 1 choice
[ 0.487593] hub 5-0:1.0: USB hub found
[ 0.487610] hub 5-0:1.0: 2 ports detected
[ 0.487844] PNP: PS/2 Controller [PNP0303:KBC0,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.564733] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.572345] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.572745] mice: PS/2 mouse device common for all mice
[ 0.573104] rtc_cmos 00:04: RTC can wake from S4
[ 0.573210] rtc_cmos 00:04: rtc core: registered rtc_cmos as rtc0
[ 0.573254] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs
[ 0.573563] device-mapper: uevent: version 1.0.3
[ 0.601807] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.612294] device-mapper: multipath: version 1.1.0 loaded
[ 0.612304] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.616264] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.620805] EISA: Probing bus 0 at eisa.0
[ 0.620817] Cannot allocate resource for EISA slot 1
[ 0.620825] Cannot allocate resource for EISA slot 2
[ 0.620831] Cannot allocate resource for EISA slot 3
[ 0.620837] Cannot allocate resource for EISA slot 4
[ 0.620862] EISA: Detected 0 cards.
[ 0.631316] cpuidle: using governor ladder
[ 0.631615] cpuidle: using governor menu
[ 0.632867] TCP cubic registered
[ 0.633339] NET: Registered protocol family 10
[ 0.637321] lo: Disabled Privacy Extensions
[ 0.638198] NET: Registered protocol family 17
[ 0.639336] Using IPI No-Shortcut mode
[ 0.639563] PM: Resume from disk failed.
[ 0.639590] registered taskstats version 1
[ 0.640287] Magic number: 14:914:386
[ 0.640301] usb usb4: hash matches
[ 0.640337] thermal cooling_device1: hash matches
[ 0.640425] rtc_cmos 00:04: setting system clock to 2010-06-20 15:23:15 UTC (1277047395)
[ 0.640434] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.640439] EDD information not available.
[ 0.687948] Freeing initrd memory: 7774k freed
[ 0.796050] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 0.816610] ACPI: Battery Slot [BAT1] (battery present)
[ 0.819023] isapnp: No Plug & Play device found
[ 0.819064] Freeing unused kernel memory: 656k freed
[ 0.819625] Write protecting the kernel text: 4676k
[ 0.819697] Write protecting the kernel read-only data: 1840k
[ 0.855832] udev: starting version 151
[ 1.077343] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.077405] r8169 0000:09:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.077516] r8169 0000:09:00.0: setting latency timer to 64
[ 1.077677] alloc irq_desc for 27 on node -1
[ 1.077684] alloc kstat_irqs on node -1
[ 1.077732] r8169 0000:09:00.0: irq 27 for MSI/MSI-X
[ 1.079568] eth0: RTL8102e at 0xf8070000, 70:5a:b6:88:7e:b4, XID 04e00000 IRQ 27
[ 1.167124] ahci 0000:00:1f.2: version 3.0
[ 1.167159] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.167233] alloc irq_desc for 28 on node -1
[ 1.167240] alloc kstat_irqs on node -1
[ 1.167263] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.167385] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 3 Gbps 0xf impl SATA mode
[ 1.167397] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.167410] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.168093] scsi0 : ahci
[ 1.168452] scsi1 : ahci
[ 1.168670] scsi2 : ahci
[ 1.168875] scsi3 : ahci
[ 1.169315] ata1: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04500 irq 28
[ 1.169327] ata2: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04580 irq 28
[ 1.169337] ata3: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04600 irq 28
[ 1.169346] ata4: SATA max UDMA/133 abar m1024@0x40a04400 port 0x40a04680 irq 28
[ 1.175947] usb 1-4: configuration #1 chosen from 1 choice
[ 1.197476] Initializing USB Mass Storage driver...
[ 1.197751] scsi4 : SCSI emulation for USB Mass Storage devices
[ 1.198036] usbcore: registered new interface driver usb-storage
[ 1.198047] USB Mass Storage support registered.
[ 1.198064] usb-storage: device found at 2
[ 1.198069] usb-storage: waiting for device to settle before scanning
[ 1.292066] usb 1-8: new high speed USB device using ehci_hcd and address 3
[ 1.488075] ata2: SATA link down (SStatus 0 SControl 300)
[ 1.488106] ata4: SATA link down (SStatus 0 SControl 300)
[ 1.488132] ata3: SATA link down (SStatus 0 SControl 300)
[ 1.488160] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.524059] ata1.00: ATA-8: FUJITSU MJA2250BH G2, 00400018, max UDMA/100
[ 1.524067] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.532082] ata1.00: configured for UDMA/100
[ 1.542604] usb 1-8: configuration #1 chosen from 1 choice
[ 1.549357] scsi 0:0:0:0: Direct-Access ATA FUJITSU MJA2250B 0040 PQ: 0 ANSI: 5
[ 1.549825] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.550170] sd 0:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.550361] sd 0:0:0:0: [sda] Write Protect is off
[ 1.550371] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.550464] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.550994] sda: sda1 < sda5 > sda2
[ 1.593177] sd 0:0:0:0: [sda] Attached SCSI disk
[ 3.880761] EXT4-fs (sda2): mounted filesystem with ordered data mode
[ 6.196508] usb-storage: device scan complete
[ 6.199224] scsi 4:0:0:0: Direct-Access Generic- Multi-Card 1.00 PQ: 0 ANSI: 0 CCS
[ 6.200417] sd 4:0:0:0: Attached scsi generic sg1 type 0
[ 6.204936] sd 4:0:0:0: [sdb] Attached SCSI removable disk
[ 240.875078] Adding 584696k swap on /dev/sda5. Priority:-1 extents:1 across:584696k
[ 240.900483] udev: starting version 151
[ 240.978593] lp: driver loaded but no devices found
[ 241.499289] Linux agpgart interface v0.103
[ 241.628122] agpgart-intel 0000:00:00.0: Intel IGD Chipset
[ 241.628449] agpgart-intel 0000:00:00.0: detected 8188K stolen memory
[ 241.650373] Linux video capture interface: v2.00
[ 241.736941] type=1505 audit(1277047636.595:2): operation="profile_load" pid=577 name="/sbin/dhclient3"
[ 241.737693] type=1505 audit(1277047636.595:3): operation="profile_load" pid=577 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 241.738106] type=1505 audit(1277047636.595:4): operation="profile_load" pid=577 name="/usr/lib/connman/scripts/dhclient-script"
[ 241.752176] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 241.836575] [drm] Initialized drm 1.1.0 20060810
[ 241.885550] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (064e:c211)
[ 241.908613] input: USB 2.0 Camera as /devices/pci0000:00/0000:00:1d.7/usb1/1-8/1-8:1.0/input/input5
[ 241.908765] usbcore: registered new interface driver uvcvideo
[ 241.908775] USB Video Class driver (v0.1.0)
[ 241.917841] cfg80211: Calling CRDA to update world regulatory domain
[ 241.975734] cfg80211: World regulatory domain updated:
[ 241.975745] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 241.975756] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 241.975765] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 241.975774] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 241.975783] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 241.975791] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 242.172353] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 242.172368] i915 0000:00:02.0: setting latency timer to 64
[ 242.193117] alloc irq_desc for 29 on node -1
[ 242.193127] alloc kstat_irqs on node -1
[ 242.193146] i915 0000:00:02.0: irq 29 for MSI/MSI-X
[ 242.193162] [drm] set up 7M of stolen space
[ 242.199335] ath9k 0000:07:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 242.199360] ath9k 0000:07:00.0: setting latency timer to 64
[ 242.248785] ath: EEPROM regdomain: 0x65
[ 242.248791] ath: EEPROM indicates we should expect a direct regpair map
[ 242.248800] ath: Country alpha2 being used: 00
[ 242.248806] ath: Regpair used: 0x65
[ 242.328764] [drm] initialized overlay support
[ 242.445788] type=1505 audit(1277047637.303:5): operation="profile_replace" pid=706 name="/sbin/dhclient3"
[ 242.446397] type=1505 audit(1277047637.303:6): operation="profile_replace" pid=706 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 242.446744] type=1505 audit(1277047637.303:7): operation="profile_replace" pid=706 name="/usr/lib/connman/scripts/dhclient-script"
[ 242.454266] type=1505 audit(1277047637.311:8): operation="profile_load" pid=707 name="/usr/bin/evince"
[ 242.463961] type=1505 audit(1277047637.319:9): operation="profile_load" pid=707 name="/usr/bin/evince-previewer"
[ 242.477979] type=1505 audit(1277047637.335:10): operation="profile_load" pid=707 name="/usr/bin/evince-thumbnailer"
[ 242.572025] type=1505 audit(1277047637.431:11): operation="profile_load" pid=713 name="/usr/lib/cups/backend/cups-pdf"
[ 242.584435] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 242.586022] Registered led device: ath9k-phy0::radio
[ 242.586062] Registered led device: ath9k-phy0::assoc
[ 242.586109] Registered led device: ath9k-phy0::tx
[ 242.586146] Registered led device: ath9k-phy0::rx
[ 242.586185] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf82a0000, irq=17
[ 242.811112] fb0: inteldrmfb frame buffer device
[ 242.811120] registered panic notifier
[ 242.811193] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 242.811291] alloc irq_desc for 22 on node -1
[ 242.811298] alloc kstat_irqs on node -1
[ 242.811316] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 242.811389] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 242.824675] vga16fb: initializing
[ 242.824689] vga16fb: mapped to 0xc00a0000
[ 242.824700] vga16fb: not registering due to another framebuffer present
[ 242.896895] [drm] Big FIFO is enabled
[ 242.964264] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 242.965101] [drm] Big FIFO is enabled
[ 242.965122] [drm] Big FIFO is enabled
[ 242.999838] hda_codec: ALC272: BIOS auto-probing.
[ 243.001326] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input6
[ 243.078854] [drm] Big FIFO is enabled
[ 243.087194] r8169: eth0: link down
[ 243.087862] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 243.110582] [drm] Big FIFO is enabled
[ 243.122535] Console: switching to colour frame buffer device 128x37
[ 243.133186] [drm] Big FIFO is enabled
[ 243.567902] Synaptics Touchpad, model: 1, fw: 7.2, id: 0x1c0b1, caps: 0xd04731/0xa40000

+1
0
-1
Imagen de fabiruchis75
+1
0
-1

Bueno amigos, buscando y buscando la solución al problema presentado, encontré de entre muchas diferentes posibles soluciones la siguiente:

Ingresar al bios, (f2), Advanced, SATA controller mode; cambiarlo a "Compatibility", (f10) salir y guardar cambios.

Y listo, arranque en 29.5 segundos...

A mi me funcionó, pueden probar.

Gracias.!

+1
0
-1
Imagen de ozambra
+1
0
-1

pana distes en el clavo, ya este asunto me estaba volviendo loco. Hice lo que dijistes y ya demora son 14 segundos en iniciar Ubuntuu, cuando antes tardaba 7 minutos.

Excelente aporte

+1
0
-1

Oscar Zambrano

Imagen de txabi
+1
0
-1

aupa a todos:
tengo instalado ubuntu 10.4 en un hp pavillon y no me reconoce el cd-dvd he sacado esta informacion, pero soy demasiado inexperto para interpretarlo, ¿algien me puede echar una mano? un saludo y gracias por adelantado,

51: SCSI 100.0: 10602 CD-ROM (DVD)
[Created at block.247]
UDI: /org/freedesktop/Hal/devices/storage_model_CDDVDW_TS_L633M
Unique ID: KD9E.ccWUHyJgff6
Parent ID: w7Y8.z0iAByBUye0
SysFS ID: /class/block/sr0
SysFS BusID: 1:0:0:0
SysFS Device Link: /devices/pci0000:00/0000:00:1f.2/host1/target1:0:0/1:0:0:0
Hardware Class: cdrom
Model: "hp CDDVDW TS-L633M"
Vendor: "hp"
Device: "CDDVDW TS-L633M"
Revision: "0301"
Driver: "ahci", "sr"
Driver Modules: "ahci"
Device File: /dev/sr0 (/dev/sg1)
Device Files: /dev/sr0, /dev/block/11:0, /dev/scd0, /dev/disk/by-path/pci-0000:00:1f.2-scsi-1:0:0:0, /dev/cdrom, /dev/cdrw, /dev/dvd, /dev/dvdrw
Device Number: block 11:0 (char 21:1)
Features: CD-R, CD-RW, DVD, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+DL, DVDRAM
Drive status: no medium
Config Status: cfg=new, avail=yes, need=no, active=unknown
Attached to: #24 (SATA controller)
Drive Speed: 24

+1
0
-1
Imagen de Neofitus
+1
0
-1

Mi problema esta qui, pero mi modelo es el NB205... alguna idea?

[ 2.017637] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >

[ 3.818215] sd 2:0:0:0: [sda] Attached SCSI disk

[ 68.005439] EXT4-fs (sda5): mounted filesystem with ordered data mode

[ 394.178941] udev: starting version 151

[ 394.193503] Adding 1998840k swap on /dev/sda6. Priority:-1 extents:1 across:1998840k

[ 394.392457] lp: driver loaded but no devices found

espero algien me peuda ayudar

+1
0
-1
Imagen de sordoman
+1
0
-1

Hola neofitus

Mira de pasar lo siguente por terminal y posteas lo ke te salga, a ver si sacamos algo en claro. Pero algo con los discos hay.

sudo fdisk -l

y si no te importa también esta

cat /etc/fstab

a ver ke tal

suerte

+1
0
-1