Arranque lento en Toshiba NB205

Imagen de Neofitus
0 puntos

hola amigos ubunteros, Primero que nada explico. hace unas semanas me baje el ubunutu 10.4 para cambiarme definitivamente, pues bien despues de unos disa con mi nuevo sistema me aparecio un error al arranque diciendo que estaba mal mi uuid... asi k lo que hice fue cambiar mi grub para que inice con el /dev/sda5 (donde tengo mi linux), pues bien funciono, ya no me parece dicho problema pero ahora esta tardando muchismo en arrancar, revisando en el log vi esto

[ 2.017637] sda: sda1 sda2 sda3 sda4 < sda5 sda6 sda7 >

[ 3.818215] sd 2:0:0:0: [sda] Attached SCSI disk

[ 68.005439] EXT4-fs (sda5): mounted filesystem with ordered data mode

[ 394.178941] udev: starting version 151

[ 394.193503] Adding 1998840k swap on /dev/sda6. Priority:-1 extents:1 across:1998840k

[ 394.392457] lp: driver loaded but no devices found

Al parecer estar tardando muchisimo en leer o hacer algo en las particiones, alguna idea de como solucionarlo?

mushimas gracias, de antemano

Imagen de colometa
+1
0
-1

Hola también. MI problema es el mismo,con un Toshiba NB200, compartido con Windows 7. He estado buscando posibles soluciones pero no encuentro nada. Soy usuaria novata; he podido llegar hasta el log y coincide el retraso en el mismo punto que Neofitus:

[ 0.004436] CPU: Processor Core ID: 0
[ 0.004443] mce: CPU supports 5 MCE banks
[ 0.004460] CPU0: Thermal monitoring enabled (TM2)
[ 0.004469] using mwait in idle threads.
[ 0.004479] Performance Events: Atom events, Intel PMU driver.
[ 0.004496] ... version: 3
[ 0.004501] ... bit width: 40
[ 0.004506] ... generic registers: 2
[ 0.004511] ... value mask: 000000ffffffffff
[ 0.004516] ... max period: 000000007fffffff
[ 0.004521] ... fixed-purpose events: 3
[ 0.004525] ... event mask: 0000000700000003
[ 0.004535] Checking 'hlt' instruction... OK.
[ 0.020014] Disabling 4MB page tables to avoid TLB bug
[ 0.024391] ACPI: Core revision 20090903
[ 0.044039] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.044055] ftrace: allocating 21780 entries in 43 pages
[ 0.048105] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.048503] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.088344] CPU0: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.092001] Booting processor 1 APIC 0x1 ip 0x6000
[ 0.008000] Initializing CPU#1
[ 0.008000] CPU: L1 I cache: 32K, L1 D cache: 24K
[ 0.008000] CPU: L2 cache: 512K
[ 0.008000] CPU: Physical Processor ID: 0
[ 0.008000] CPU: Processor Core ID: 0
[ 0.008000] CPU1: Thermal monitoring enabled (TM2)
[ 0.176120] CPU1: Intel(R) Atom(TM) CPU N280 @ 1.66GHz stepping 02
[ 0.176148] checking TSC synchronization [CPU#0 -> CPU#1]: passed.
[ 0.180063] Brought up 2 CPUs
[ 0.180071] Total of 2 processors activated (6649.66 BogoMIPS).
[ 0.180313] CPU0 attaching sched-domain:
[ 0.180322] domain 0: span 0-1 level SIBLING
[ 0.180327] groups: 0 (cpu_power = 589) 1 (cpu_power = 589)
[ 0.180339] domain 1: span 0-1 level MC
[ 0.180345] groups: 0-1 (cpu_power = 1178)
[ 0.180356] CPU1 attaching sched-domain:
[ 0.180361] domain 0: span 0-1 level SIBLING
[ 0.180366] groups: 1 (cpu_power = 589) 0 (cpu_power = 589)
[ 0.180377] domain 1: span 0-1 level MC
[ 0.180382] groups: 0-1 (cpu_power = 1178)
[ 0.180606] devtmpfs: initialized
[ 0.180606] regulator: core version 0.5
[ 0.180606] Time: 14:37:48 Date: 08/18/10
[ 0.180606] NET: Registered protocol family 16
[ 0.180606] Trying to unpack rootfs image as initramfs...
[ 0.180606] EISA bus registered
[ 0.180606] ACPI: bus type pci registered
[ 0.180748] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255
[ 0.180757] PCI: MCFG area at e0000000 reserved in E820
[ 0.180763] PCI: Using MMCONFIG for extended config space
[ 0.180771] PCI: Using configuration type 1 for base access
[ 0.185607] bio: create slab at 0
[ 0.188074] ACPI: EC: Look up EC in DSDT
[ 0.195494] ACPI: BIOS _OSI(Linux) query ignored
[ 0.196803] ACPI: Interpreter enabled
[ 0.196803] ACPI: (supports S0 S3 S4 S5)
[ 0.196803] ACPI: Using IOAPIC for interrupt routing
[ 0.254453] ACPI: EC: GPE = 0x19, I/O: command/status = 0x66, data = 0x62
[ 0.255209] ACPI: No dock devices found.
[ 0.256630] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.256825] pci 0000:00:02.0: reg 10 32bit mmio: [0xf0000000-0xf007ffff]
[ 0.256838] pci 0000:00:02.0: reg 14 io port: [0x1800-0x1807]
[ 0.256849] pci 0000:00:02.0: reg 18 32bit mmio pref: [0xd0000000-0xdfffffff]
[ 0.256861] pci 0000:00:02.0: reg 1c 32bit mmio: [0xf0200000-0xf023ffff]
[ 0.256924] pci 0000:00:02.1: reg 10 32bit mmio: [0xf0080000-0xf00fffff]
[ 0.257093] pci 0000:00:1b.0: reg 10 64bit mmio: [0xf0440000-0xf0443fff]
[ 0.257179] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.257190] pci 0000:00:1b.0: PME# disabled
[ 0.257318] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.257329] pci 0000:00:1c.0: PME# disabled
[ 0.257461] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.257471] pci 0000:00:1c.1: PME# disabled
[ 0.257603] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold
[ 0.257613] pci 0000:00:1c.2: PME# disabled
[ 0.257749] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.257761] pci 0000:00:1c.3: PME# disabled
[ 0.257861] pci 0000:00:1d.0: reg 20 io port: [0x1820-0x183f]
[ 0.257956] pci 0000:00:1d.1: reg 20 io port: [0x1840-0x185f]
[ 0.258049] pci 0000:00:1d.2: reg 20 io port: [0x1860-0x187f]
[ 0.258144] pci 0000:00:1d.3: reg 20 io port: [0x1880-0x189f]
[ 0.258242] pci 0000:00:1d.7: reg 10 32bit mmio: [0xf0444000-0xf04443ff]
[ 0.258326] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold
[ 0.258337] pci 0000:00:1d.7: PME# disabled
[ 0.258565] pci 0000:00:1f.0: quirk: region 1000-107f claimed by ICH6 ACPI/GPIO/TCO
[ 0.258578] pci 0000:00:1f.0: quirk: region 1180-11bf claimed by ICH6 GPIO
[ 0.258589] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0680 (mask 007f)
[ 0.258601] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 2 PIO at ff2c (mask 007f)
[ 0.258614] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 4 PIO at 0068 (mask 0007)
[ 0.258695] pci 0000:00:1f.1: reg 10 io port: [0x00-0x07]
[ 0.258711] pci 0000:00:1f.1: reg 14 io port: [0x00-0x03]
[ 0.258726] pci 0000:00:1f.1: reg 18 io port: [0x00-0x07]
[ 0.258741] pci 0000:00:1f.1: reg 1c io port: [0x00-0x03]
[ 0.258756] pci 0000:00:1f.1: reg 20 io port: [0x1810-0x181f]
[ 0.258849] pci 0000:00:1f.2: reg 10 io port: [0x18c8-0x18cf]
[ 0.258864] pci 0000:00:1f.2: reg 14 io port: [0x18c0-0x18c3]
[ 0.258879] pci 0000:00:1f.2: reg 18 io port: [0x18a8-0x18af]
[ 0.258894] pci 0000:00:1f.2: reg 1c io port: [0x180c-0x180f]
[ 0.258909] pci 0000:00:1f.2: reg 20 io port: [0x18b0-0x18bf]
[ 0.258924] pci 0000:00:1f.2: reg 24 32bit mmio: [0xf0444400-0xf04447ff]
[ 0.258977] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.258987] pci 0000:00:1f.2: PME# disabled
[ 0.259068] pci 0000:00:1f.3: reg 20 io port: [0x18e0-0x18ff]
[ 0.259330] pci 0000:03:00.0: reg 10 64bit mmio: [0xf0100000-0xf010ffff]
[ 0.259480] pci 0000:03:00.0: supports D1
[ 0.259488] pci 0000:03:00.0: PME# supported from D0 D1 D3hot
[ 0.259501] pci 0000:03:00.0: PME# disabled
[ 0.259627] pci 0000:00:1c.1: bridge 32bit mmio: [0xf0100000-0xf01fffff]
[ 0.259823] pci 0000:04:00.0: reg 10 io port: [0x2000-0x20ff]
[ 0.259920] pci 0000:04:00.0: reg 18 64bit mmio pref: [0xf0510000-0xf0510fff]
[ 0.259981] pci 0000:04:00.0: reg 20 64bit mmio pref: [0xf0500000-0xf050ffff]
[ 0.260054] pci 0000:04:00.0: reg 30 32bit mmio pref: [0x000000-0x01ffff]
[ 0.260229] pci 0000:04:00.0: supports D1 D2
[ 0.260238] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.260259] pci 0000:04:00.0: PME# disabled
[ 0.260440] pci 0000:00:1c.2: bridge io port: [0x2000-0x2fff]
[ 0.260459] pci 0000:00:1c.2: bridge 64bit mmio pref: [0xf0500000-0xf05fffff]
[ 0.260631] pci 0000:00:1e.0: transparent bridge
[ 0.260691] pci_bus 0000:00: on NUMA node 0
[ 0.260710] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.261271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.261488] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.261699] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT]
[ 0.261915] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.262221] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT]
[ 0.284639] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 *7 10 12 14 15)
[ 0.284911] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15)
[ 0.285173] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11
[ 0.285451] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 11 12 14 15) *10
[ 0.285711] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled.
[ 0.285975] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled.
[ 0.286259] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15)
[ 0.286526] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 *5 6 7 11 12 14 15)
[ 0.286835] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.286869] vgaarb: loaded
[ 0.287221] SCSI subsystem initialized
[ 0.287450] libata version 3.00 loaded.
[ 0.287670] usbcore: registered new interface driver usbfs
[ 0.287713] usbcore: registered new interface driver hub
[ 0.287806] usbcore: registered new device driver usb
[ 0.288293] ACPI: WMI: Mapper loaded
[ 0.288300] PCI: Using ACPI for IRQ routing
[ 0.288716] NetLabel: Initializing
[ 0.288723] NetLabel: domain hash size = 128
[ 0.288728] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.288759] NetLabel: unlabeled traffic allowed by default
[ 0.288865] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0
[ 0.288881] hpet0: 3 comparators, 64-bit 14.318180 MHz counter
[ 0.292309] Switching to clocksource tsc
[ 0.296770] AppArmor: AppArmor Filesystem Enabled
[ 0.296810] pnp: PnP ACPI init
[ 0.296856] ACPI: bus type pnp registered
[ 0.319507] pnp: PnP ACPI: found 9 devices
[ 0.319515] ACPI: ACPI bus type pnp unregistered
[ 0.319526] PnPBIOS: Disabled by ACPI PNP
[ 0.319558] system 00:01: iomem range 0xe0000000-0xefffffff has been reserved
[ 0.319569] system 00:01: iomem range 0xfed14000-0xfed17fff has been reserved
[ 0.319595] system 00:01: iomem range 0xfed18000-0xfed18fff has been reserved
[ 0.319606] system 00:01: iomem range 0xfed19000-0xfed19fff has been reserved
[ 0.319615] system 00:01: iomem range 0xfed1c000-0xfed1ffff has been reserved
[ 0.319625] system 00:01: iomem range 0xfed20000-0xfed3ffff has been reserved
[ 0.319635] system 00:01: iomem range 0xfed40000-0xfed44fff has been reserved
[ 0.319646] system 00:01: iomem range 0xfed45000-0xfed8ffff has been reserved
[ 0.319670] system 00:03: iomem range 0xfed00000-0xfed003ff has been reserved
[ 0.319692] system 00:05: ioport range 0x800-0x80f has been reserved
[ 0.319702] system 00:05: ioport range 0x1000-0x107f has been reserved
[ 0.319711] system 00:05: ioport range 0x1180-0x11bf has been reserved
[ 0.319722] system 00:05: ioport range 0xfe00-0xfe00 has been reserved
[ 0.319732] system 00:05: ioport range 0xff2c-0xff7f has been reserved
[ 0.354985] pci 0000:00:1c.0: PCI bridge, secondary bus 0000:02
[ 0.354999] pci 0000:00:1c.0: IO window: 0x3000-0x3fff
[ 0.355014] pci 0000:00:1c.0: MEM window: 0x40000000-0x401fffff
[ 0.355027] pci 0000:00:1c.0: PREFETCH window: 0x00000040200000-0x000000403fffff
[ 0.355042] pci 0000:00:1c.1: PCI bridge, secondary bus 0000:03
[ 0.355051] pci 0000:00:1c.1: IO window: 0x4000-0x4fff
[ 0.355063] pci 0000:00:1c.1: MEM window: 0xf0100000-0xf01fffff
[ 0.355075] pci 0000:00:1c.1: PREFETCH window: 0x00000040400000-0x000000405fffff
[ 0.355094] pci 0000:00:1c.2: PCI bridge, secondary bus 0000:04
[ 0.355103] pci 0000:00:1c.2: IO window: 0x2000-0x2fff
[ 0.355115] pci 0000:00:1c.2: MEM window: 0x40600000-0x409fffff
[ 0.355126] pci 0000:00:1c.2: PREFETCH window: 0x000000f0500000-0x000000f05fffff
[ 0.355141] pci 0000:00:1c.3: PCI bridge, secondary bus 0000:05
[ 0.355150] pci 0000:00:1c.3: IO window: 0x5000-0x5fff
[ 0.355163] pci 0000:00:1c.3: MEM window: 0x40a00000-0x40bfffff
[ 0.355174] pci 0000:00:1c.3: PREFETCH window: 0x00000040c00000-0x00000040dfffff
[ 0.355189] pci 0000:00:1e.0: PCI bridge, secondary bus 0000:06
[ 0.355195] pci 0000:00:1e.0: IO window: disabled
[ 0.355206] pci 0000:00:1e.0: MEM window: disabled
[ 0.355215] pci 0000:00:1e.0: PREFETCH window: disabled
[ 0.355256] alloc irq_desc for 17 on node -1
[ 0.355262] alloc kstat_irqs on node -1
[ 0.355279] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 0.355292] pci 0000:00:1c.0: setting latency timer to 64
[ 0.355312] alloc irq_desc for 16 on node -1
[ 0.355318] alloc kstat_irqs on node -1
[ 0.355329] pci 0000:00:1c.1: PCI INT B -> GSI 16 (level, low) -> IRQ 16
[ 0.355340] pci 0000:00:1c.1: setting latency timer to 64
[ 0.355360] alloc irq_desc for 18 on node -1
[ 0.355365] alloc kstat_irqs on node -1
[ 0.355376] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.355387] pci 0000:00:1c.2: setting latency timer to 64
[ 0.355407] alloc irq_desc for 19 on node -1
[ 0.355413] alloc kstat_irqs on node -1
[ 0.355423] pci 0000:00:1c.3: PCI INT D -> GSI 19 (level, low) -> IRQ 19
[ 0.355434] pci 0000:00:1c.3: setting latency timer to 64
[ 0.355451] pci 0000:00:1e.0: setting latency timer to 64
[ 0.355462] pci_bus 0000:00: resource 0 io: [0x00-0xffff]
[ 0.355471] pci_bus 0000:00: resource 1 mem: [0x000000-0xffffffff]
[ 0.355479] pci_bus 0000:02: resource 0 io: [0x3000-0x3fff]
[ 0.355487] pci_bus 0000:02: resource 1 mem: [0x40000000-0x401fffff]
[ 0.355496] pci_bus 0000:02: resource 2 pref mem [0x40200000-0x403fffff]
[ 0.355504] pci_bus 0000:03: resource 0 io: [0x4000-0x4fff]
[ 0.355512] pci_bus 0000:03: resource 1 mem: [0xf0100000-0xf01fffff]
[ 0.355521] pci_bus 0000:03: resource 2 pref mem [0x40400000-0x405fffff]
[ 0.355529] pci_bus 0000:04: resource 0 io: [0x2000-0x2fff]
[ 0.355537] pci_bus 0000:04: resource 1 mem: [0x40600000-0x409fffff]
[ 0.355546] pci_bus 0000:04: resource 2 pref mem [0xf0500000-0xf05fffff]
[ 0.355554] pci_bus 0000:05: resource 0 io: [0x5000-0x5fff]
[ 0.355562] pci_bus 0000:05: resource 1 mem: [0x40a00000-0x40bfffff]
[ 0.355570] pci_bus 0000:05: resource 2 pref mem [0x40c00000-0x40dfffff]
[ 0.355579] pci_bus 0000:06: resource 3 io: [0x00-0xffff]
[ 0.355587] pci_bus 0000:06: resource 4 mem: [0x000000-0xffffffff]
[ 0.355691] NET: Registered protocol family 2
[ 0.355965] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.356851] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.358024] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.358560] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.358573] TCP reno registered
[ 0.358839] NET: Registered protocol family 1
[ 0.358927] pci 0000:00:02.0: Boot video device
[ 0.359177] Simple Boot Flag at 0x36 set to 0x1
[ 0.359667] cpufreq-nforce2: No nForce2 chipset.
[ 0.359746] Scanning for low memory corruption every 60 seconds
[ 0.360090] audit: initializing netlink socket (disabled)
[ 0.360121] type=2000 audit(1282142268.358:1): initialized
[ 0.381007] highmem bounce pool size: 64 pages
[ 0.381023] HugeTLB registered 4 MB page size, pre-allocated 0 pages
[ 0.386135] VFS: Disk quotas dquot_6.5.2
[ 0.386326] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.388329] fuse init (API version 7.13)
[ 0.388611] msgmni has been set to 1716
[ 0.389267] alg: No test for stdrng (krng)
[ 0.389459] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.389469] io scheduler noop registered
[ 0.389475] io scheduler anticipatory registered
[ 0.389483] io scheduler deadline registered
[ 0.389635] io scheduler cfq registered (default)
[ 0.389978] alloc irq_desc for 24 on node -1
[ 0.389986] alloc kstat_irqs on node -1
[ 0.390010] pcieport 0000:00:1c.0: irq 24 for MSI/MSI-X
[ 0.390029] pcieport 0000:00:1c.0: setting latency timer to 64
[ 0.390303] alloc irq_desc for 25 on node -1
[ 0.390310] alloc kstat_irqs on node -1
[ 0.390328] pcieport 0000:00:1c.1: irq 25 for MSI/MSI-X
[ 0.390346] pcieport 0000:00:1c.1: setting latency timer to 64
[ 0.390639] alloc irq_desc for 26 on node -1
[ 0.390646] alloc kstat_irqs on node -1
[ 0.390666] pcieport 0000:00:1c.2: irq 26 for MSI/MSI-X
[ 0.390683] pcieport 0000:00:1c.2: setting latency timer to 64
[ 0.390987] alloc irq_desc for 27 on node -1
[ 0.390994] alloc kstat_irqs on node -1
[ 0.391011] pcieport 0000:00:1c.3: irq 27 for MSI/MSI-X
[ 0.391029] pcieport 0000:00:1c.3: setting latency timer to 64
[ 0.391279] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.391632] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.392238] ACPI: AC Adapter [ACAD] (on-line)
[ 0.392479] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.392574] ACPI: Lid Switch [LID0]
[ 0.392705] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.392714] ACPI: Power Button [PWRB]
[ 0.392894] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
[ 0.392904] ACPI: Power Button [PWRF]
[ 0.394699] ACPI: SSDT 3f6d5f7b 00203 (v02 PmRef Cpu0Ist 00003000 INTL 20050624)
[ 0.396042] ACPI: SSDT 3f6d58b7 0063F (v02 PmRef Cpu0Cst 00003001 INTL 20050624)
[ 0.402449] Monitor-Mwait will be used to enter C-1 state
[ 0.402550] Monitor-Mwait will be used to enter C-2 state
[ 0.402631] Monitor-Mwait will be used to enter C-3 state
[ 0.402651] Marking TSC unstable due to TSC halts in idle
[ 0.402823] processor LNXCPU:00: registered as cooling_device0
[ 0.403847] ACPI: SSDT 3f6d617e 000D4 (v02 PmRef Cpu1Ist 00003000 INTL 20050624)
[ 0.404771] ACPI: SSDT 3f6d5ef6 00085 (v02 PmRef Cpu1Cst 00003000 INTL 20050624)
[ 0.406009] Switching to clocksource hpet
[ 0.413540] processor LNXCPU:01: registered as cooling_device1
[ 0.446030] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.450330] brd: module loaded
[ 0.451880] loop: module loaded
[ 0.452201] input: Macintosh mouse button emulation as /devices/virtual/input/input3
[ 0.452474] ata_piix 0000:00:1f.1: version 2.13
[ 0.452512] ata_piix 0000:00:1f.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.452595] ata_piix 0000:00:1f.1: setting latency timer to 64
[ 0.452816] isapnp: Scanning for PnP cards...
[ 0.469137] ACPI: Battery Slot [BAT1] (battery absent)
[ 0.501287] scsi0 : ata_piix
[ 0.509070] scsi1 : ata_piix
[ 0.510354] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x1810 irq 14
[ 0.510363] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x1818 irq 15
[ 0.511417] Fixed MDIO Bus: probed
[ 0.511528] PPP generic driver version 2.4.2
[ 0.511672] tun: Universal TUN/TAP device driver, 1.6
[ 0.511678] tun: (C) 1999-2004 Max Krasnyansky
[ 0.511912] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.511965] alloc irq_desc for 23 on node -1
[ 0.511972] alloc kstat_irqs on node -1
[ 0.511987] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.512030] ehci_hcd 0000:00:1d.7: setting latency timer to 64
[ 0.512039] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[ 0.512140] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 1
[ 0.512183] ehci_hcd 0000:00:1d.7: using broken periodic workaround
[ 0.512204] ehci_hcd 0000:00:1d.7: debug port 1
[ 0.516089] ehci_hcd 0000:00:1d.7: cache line size of 32 is not supported
[ 0.516312] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xf0444000
[ 0.529725] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00
[ 0.530025] usb usb1: configuration #1 chosen from 1 choice
[ 0.530117] hub 1-0:1.0: USB hub found
[ 0.530142] hub 1-0:1.0: 8 ports detected
[ 0.530302] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.530349] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.530433] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23
[ 0.530450] uhci_hcd 0000:00:1d.0: setting latency timer to 64
[ 0.530459] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[ 0.530562] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 0.530607] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00001820
[ 0.530854] usb usb2: configuration #1 chosen from 1 choice
[ 0.530932] hub 2-0:1.0: USB hub found
[ 0.530950] hub 2-0:1.0: 2 ports detected
[ 0.531058] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 0.531077] uhci_hcd 0000:00:1d.1: setting latency timer to 64
[ 0.531085] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[ 0.531180] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 3
[ 0.531239] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00001840
[ 0.531484] usb usb3: configuration #1 chosen from 1 choice
[ 0.531559] hub 3-0:1.0: USB hub found
[ 0.531577] hub 3-0:1.0: 2 ports detected
[ 0.531683] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18
[ 0.531697] uhci_hcd 0000:00:1d.2: setting latency timer to 64
[ 0.531705] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[ 0.531804] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 4
[ 0.531858] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00001860
[ 0.532107] usb usb4: configuration #1 chosen from 1 choice
[ 0.532184] hub 4-0:1.0: USB hub found
[ 0.532203] hub 4-0:1.0: 2 ports detected
[ 0.532313] uhci_hcd 0000:00:1d.3: PCI INT D -> GSI 16 (level, low) -> IRQ 16
[ 0.532329] uhci_hcd 0000:00:1d.3: setting latency timer to 64
[ 0.532337] uhci_hcd 0000:00:1d.3: UHCI Host Controller
[ 0.532432] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 5
[ 0.532487] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00001880
[ 0.532728] usb usb5: configuration #1 chosen from 1 choice
[ 0.532804] hub 5-0:1.0: USB hub found
[ 0.532824] hub 5-0:1.0: 2 ports detected
[ 0.533088] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
[ 0.568522] ata2: port disabled. ignoring.
[ 0.614208] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 0.614237] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 0.614527] mice: PS/2 mouse device common for all mice
[ 0.614856] rtc_cmos 00:06: RTC can wake from S4
[ 0.614963] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 0.615012] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
[ 0.615332] device-mapper: uevent: version 1.0.3
[ 0.637422] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 0.676078] Freeing initrd memory: 7777k freed
[ 0.683500] device-mapper: multipath: version 1.1.0 loaded
[ 0.683511] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.683944] EISA: Probing bus 0 at eisa.0
[ 0.683957] Cannot allocate resource for EISA slot 1
[ 0.683965] Cannot allocate resource for EISA slot 2
[ 0.683971] Cannot allocate resource for EISA slot 3
[ 0.683977] Cannot allocate resource for EISA slot 4
[ 0.683983] Cannot allocate resource for EISA slot 5
[ 0.684005] EISA: Detected 0 cards.
[ 0.684435] cpuidle: using governor ladder
[ 0.684761] cpuidle: using governor menu
[ 0.686017] TCP cubic registered
[ 0.686492] NET: Registered protocol family 10
[ 0.687683] lo: Disabled Privacy Extensions
[ 0.688548] NET: Registered protocol family 17
[ 0.689829] Using IPI No-Shortcut mode
[ 0.690108] PM: Resume from disk failed.
[ 0.690138] registered taskstats version 1
[ 0.690926] Magic number: 6:430:637
[ 0.691069] rtc_cmos 00:06: setting system clock to 2010-08-18 14:37:49 UTC (1282142269)
[ 0.691078] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.691083] EDD information not available.
[ 0.708871] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 0.807472] isapnp: No Plug & Play device found
[ 0.807532] Freeing unused kernel memory: 660k freed
[ 0.808100] Write protecting the kernel text: 4680k
[ 0.808176] Write protecting the kernel read-only data: 1840k
[ 0.844932] udev: starting version 151
[ 0.873129] usb 1-2: new high speed USB device using ehci_hcd and address 2
[ 1.137465] ahci 0000:00:1f.2: version 3.0
[ 1.137507] ahci 0000:00:1f.2: PCI INT B -> GSI 19 (level, low) -> IRQ 19
[ 1.137584] alloc irq_desc for 28 on node -1
[ 1.137591] alloc kstat_irqs on node -1
[ 1.137615] ahci 0000:00:1f.2: irq 28 for MSI/MSI-X
[ 1.137749] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 4 ports 1.5 Gbps 0x5 impl SATA mode
[ 1.137761] ahci 0000:00:1f.2: flags: 64bit ncq pm led clo pio slum part
[ 1.137774] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.155885] scsi2 : ahci
[ 1.170020] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
[ 1.170082] r8169 0000:04:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18
[ 1.170218] r8169 0000:04:00.0: setting latency timer to 64
[ 1.170404] alloc irq_desc for 29 on node -1
[ 1.170412] alloc kstat_irqs on node -1
[ 1.170461] r8169 0000:04:00.0: irq 29 for MSI/MSI-X
[ 1.170603] scsi3 : ahci
[ 1.172542] eth0: RTL8102e at 0xf809c000, 00:26:22:e8:fb:06, XID 04c00000 IRQ 29
[ 1.173288] usb 1-2: configuration #1 chosen from 1 choice
[ 1.175064] scsi4 : ahci
[ 1.175331] scsi5 : ahci
[ 1.175775] ata3: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444500 irq 28
[ 1.175784] ata4: DUMMY
[ 1.175792] ata5: SATA max UDMA/133 abar m1024@0xf0444400 port 0xf0444600 irq 28
[ 1.175799] ata6: DUMMY
[ 1.493203] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.493261] ata5: SATA link down (SStatus 0 SControl 300)
[ 1.508648] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.576268] ata3.00: ATA-8: TOSHIBA MK2555GSX, FG001M, max UDMA/100
[ 1.576282] ata3.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32), AA
[ 1.580626] ata3.00: ACPI cmd ef/10:03:00:00:00:a0 (SET FEATURES) filtered out
[ 1.632154] usb 3-1: new low speed USB device using uhci_hcd and address 2
[ 1.632284] ata3.00: configured for UDMA/100
[ 1.648487] scsi 2:0:0:0: Direct-Access ATA TOSHIBA MK2555GS FG00 PQ: 0 ANSI: 5
[ 1.648909] sd 2:0:0:0: Attached scsi generic sg0 type 0
[ 1.649209] sd 2:0:0:0: [sda] 488397168 512-byte logical blocks: (250 GB/232 GiB)
[ 1.649424] sd 2:0:0:0: [sda] Write Protect is off
[ 1.649432] sd 2:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.649505] sd 2:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.649886] sda: sda1 sda2 sda3 sda4 < sda5
[ 1.831770] usb 3-1: configuration #1 chosen from 1 choice
[ 1.831805] sda6 sda7 >
[ 1.856386] sd 2:0:0:0: [sda] Attached SCSI disk
[ 1.870629] usbcore: registered new interface driver hiddev
[ 1.910191] input: HID 04d9:0499 as /devices/pci0000:00/0000:00:1d.1/usb3/3-1/3-1:1.0/input/input5
[ 1.910547] generic-usb 0003:04D9:0499.0001: input,hidraw0: USB HID v1.10 Mouse [HID 04d9:0499] on usb-0000:00:1d.1-1/input0
[ 1.910616] usbcore: registered new interface driver usbhid
[ 1.910624] usbhid: v2.6:USB HID core driver
[ 18.074145] EXT4-fs (sda5): mounted filesystem with ordered data mode
[ 135.461100] Adding 9765880k swap on /dev/sda6. Priority:-1 extents:1 across:9765880k
[ 135.503517] udev: starting version 151
[ 135.886966] lp: driver loaded but no devices found
[ 135.950816] Linux agpgart interface v0.103
[ 135.967081] acpi device:00: registered as cooling_device2
[ 135.967485] input: Video Bus as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0A08:00/LNXVIDEO:00/input/input6
[ 135.967626] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 136.005089] intel_rng: FWH not detected
[ 136.126532] Linux video capture interface: v2.00
[ 136.291797] cfg80211: Calling CRDA to update world regulatory domain
[ 136.354812] cfg80211: World regulatory domain updated:
[ 136.354822] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 136.354831] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.354839] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 136.354847] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 136.354854] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.354862] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 136.392463] [drm] Initialized drm 1.1.0 20060810
[ 136.418052] agpgart-intel 0000:00:00.0: Intel 945GME Chipset
[ 136.420271] agpgart-intel 0000:00:00.0: detected 7932K stolen memory
[ 136.437235] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xd0000000
[ 136.482291] type=1505 audit(1282135205.290:2): operation="profile_load" pid=623 name="/sbin/dhclient3"
[ 136.483077] type=1505 audit(1282135205.290:3): operation="profile_load" pid=623 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 136.483523] type=1505 audit(1282135205.290:4): operation="profile_load" pid=623 name="/usr/lib/connman/scripts/dhclient-script"
[ 136.541903] uvcvideo: Found UVC 1.00 device USB2.0 UVC WebCam (04f2:b128)
[ 136.545528] input: USB2.0 UVC WebCam as /devices/pci0000:00/0000:00:1d.7/usb1/1-2/1-2:1.0/input/input7
[ 136.545728] usbcore: registered new interface driver uvcvideo
[ 136.545740] USB Video Class driver (v0.1.0)
[ 136.625309] ath9k 0000:03:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17
[ 136.625345] ath9k 0000:03:00.0: setting latency timer to 64
[ 136.676676] ath: EEPROM regdomain: 0x65
[ 136.676685] ath: EEPROM indicates we should expect a direct regpair map
[ 136.676696] ath: Country alpha2 being used: 00
[ 136.676702] ath: Regpair used: 0x65
[ 136.769573] i915 0000:00:02.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16
[ 136.769591] i915 0000:00:02.0: setting latency timer to 64
[ 136.810118] [drm] set up 7M of stolen space
[ 136.934883] [drm] initialized overlay support
[ 137.094166] EXT4-fs (sda7): mounted filesystem with ordered data mode
[ 137.166110] phy0: Selected rate control algorithm 'ath9k_rate_control'
[ 137.168299] Registered led device: ath9k-phy0::radio
[ 137.168361] Registered led device: ath9k-phy0::assoc
[ 137.168420] Registered led device: ath9k-phy0::tx
[ 137.168489] Registered led device: ath9k-phy0::rx
[ 137.168547] phy0: Atheros AR9285 MAC/BB Rev:2 AR5133 RF Rev:e0: mem=0xf8980000, irq=17
[ 137.263916] input: PS/2 Mouse as /devices/platform/i8042/serio1/input/input8
[ 137.318943] input: AlpsPS/2 ALPS GlidePoint as /devices/platform/i8042/serio1/input/input9
[ 137.350911] fb0: inteldrmfb frame buffer device
[ 137.350919] registered panic notifier
[ 137.350938] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 137.391234] alloc irq_desc for 22 on node -1
[ 137.391244] alloc kstat_irqs on node -1
[ 137.391295] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22
[ 137.391701] HDA Intel 0000:00:1b.0: setting latency timer to 64
[ 137.392864] vga16fb: initializing
[ 137.392878] vga16fb: mapped to 0xc00a0000
[ 137.392888] vga16fb: not registering due to another framebuffer present
[ 137.499439] input: HDA Digital PCBeep as /devices/pci0000:00/0000:00:1b.0/input/input10
[ 137.647116] Console: switching to colour frame buffer device 128x37
[ 137.880671] type=1505 audit(1282135206.688:5): operation="profile_replace" pid=818 name="/sbin/dhclient3"
[ 137.881634] type=1505 audit(1282135206.688:6): operation="profile_replace" pid=818 name="/usr/lib/NetworkManager/nm-dhcp-client.action"
[ 137.882095] type=1505 audit(1282135206.688:7): operation="profile_replace" pid=818 name="/usr/lib/connman/scripts/dhclient-script"
[ 137.917448] type=1505 audit(1282135206.724:8): operation="profile_load" pid=821 name="/usr/bin/evince"
[ 137.947801] type=1505 audit(1282135206.752:9): operation="profile_load" pid=821 name="/usr/bin/evince-previewer"
[ 137.994791] type=1505 audit(1282135206.800:10): operation="profile_load" pid=821 name="/usr/bin/evince-thumbnailer"
[ 138.042541] type=1505 audit(1282135206.848:11): operation="profile_load" pid=841 name="/usr/lib/cups/backend/cups-pdf"
[ 138.133675] ADDRCONF(NETDEV_UP): wlan0: link is not ready
[ 138.151179] r8169: eth0: link down
[ 138.152690] ADDRCONF(NETDEV_UP): eth0: link is not ready

A ver si alguien puede darnos una pista...

+1
0
-1