plymouth no se inicia al arrancar el equipo

Imagen de ScarsFace
0 puntos

Hola!

Llevo un par de dias intentando arreglar un "pequeño" incidente con mi Ubuntu 10.10 pero no logro encontrar ninguna información que me resulte útil.
El problema en questión es que el plymouth no arranca con el equipo, todo lo que sale en la pantalla es: "Could not start boot splash: Can not access a needed shared library".
He probado de todas las maneras que he podido encontrar, pero ninguna parece funcionar en mi equipo (MacBook 5.1 dual-boot Ubuntu 10.10 y Mac OS X 10.6 snow leopard).
El plymouth funcionaba correctamente hasta que intenté instalar otro tema, y desde ese dia no importa cuantos temas nuevos instale o configure puesto que ningun cambio parece surtir efecto.

Agradezco de antemano cualquier ayuda.
Gracias, ScarsFace.

Imagen de elnetotaca
+1
0
-1

en la terminal;

gksu gedit /etc/default/grub

y pega aqui el contenido.

has instalado el Burg? o nó?

saludos

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

En cuanto tenga acceso al ordenador te pego el resultado

Y en cuanto al Burg, la respuesta es no, funciono con el grub.

Grácias!

+1
0
-1
Imagen de elnetotaca
+1
0
-1

solo eso necesito para que arreglemos tu grub.

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de elnetotaca
+1
0
-1

se me olvidaba que puedes probar con;
sudo apt-get install v86d
y luego;
sudo update-initramfs -k all -u

Saludos.

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de javi600
+1
0
-1

Hola che! mira para arreglar el Grub tenes que bajarte el Super Grub Disk

http://www.visualbeta.es/246/software-libre/super-grub-disk-restaura-el-...

y bottearlo y colocar reparar GRUB y listop

Por otro lado lo que te recomiendo con respecto a el Plymouth descargarte este programita:

Apreta Ctrl+alt+T y escribi:

sudo add-apt-repository ppa:ingalex/super-boot-manager

sudo apt-get update && sudo apt-get install ?super-boot-manager

Esperas que se te intale y te va a salir en Aplicaciones->Herramientas de sistema
Cuando abras el programa te va a pedir la contraseña y vas a la opcion Plymouth-Mananger, de ahi te vas a la pestaña Temas colocas el original de Ubuntu y pones aplicar, hasta ahi todo muy lindo, ahora lo que tenes que hacer es, irte a la opcion de Drivers Propietarios y selecionar la casilla Grub2 y apretar el boton Aplicar Fix.
Van a descargarce unos paquetes y te va a pedir la resolucion de tu pantalla, se la colocas,y acordate de ponerele luego el "-24" sin comillas, por ejemplo:

1024x780-24

reinicias y listo el pollo jajaj avisame si te funciona, voy a estar siguiendo tu post =D.

+1
0
-1
Imagen de ScarsFace
+1
0
-1

@elnetotaca

# If you change this file, run 'update-grub' afterwards to update
# /boot/grub/grub.cfg.

GRUB_DEFAULT=0
#GRUB_HIDDEN_TIMEOUT=0
GRUB_HIDDEN_TIMEOUT_QUIET=true
GRUB_TIMEOUT=1
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280×1024-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=" splash vga=789"

# Uncomment to enable BadRAM filtering, modify to suit your needs
# This works with Linux (no patch required) and with any kernel that obtains
# the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...)
#GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef"

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
GRUB_GFXMODE=1280×800

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

este es el contenido del archivo

@javi600 Voy a probar esa posible solución. Gracias, pruebo y te digo :)

+1
0
-1
Imagen de javi600
+1
0
-1

Dale ;)

+1
0
-1
Imagen de elnetotaca
+1
0
-1

el supergrub disk no va a hacer nada para el plymouth.

mira la solucion es esta;
en la terminal;
sudo apt-get install v86d
(probablemente te diga que ya esta instalado, lo cual es bueno, solo para asegurarnos.)

gksu gedit /etc/default/grub

GRUB_GFXMODE=1280×800

hay que cambiarla para que quede así;
GRUB_GFXMODE=1280×1024

guarda el archivo, y cierralo

luego otra vez en la terminal;
gksu gedit /etc/initramfs-tools/modules

pega esto al final del archivo;
uvesafb mode_option=1280x1024-24 mtrr=3 scroll=ywrap
(si ya esta, no lo pegues)

otra vez en la terminal;
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash

sudo update-grub2

sudo update-initramfs -u

y con eso tienes.

Saludos

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

@javi600

Pues aparentemente mi grub parecia estar bien. De todos modos he instalado el Super-Boot-Manager y es una herramienta mucho mas cuidada que las anteriores que habia usado para editar el Grub y demás.

Grácias por el intento :)

+1
0
-1
Imagen de javi600
+1
0
-1

Te lo soluciono, que paso? como dijiste al principio que podia ser el Grub, que podia estar fallando, yo te puse lo del Super Gub Disk para arreglar especificamente el GRUB. Independientemente de eso el programita Super-Boot-Manager cuando Aplica el FIx (en la pestaña Divers Propietarios) te instala y configura lo que el amigo elnetotaca te dice, solo que automaticamente. FIjate si podes arreglarlo y decime =D

+1
0
-1
Imagen de ScarsFace
+1
0
-1

Si cuando instale el programita del Super-Boot-Manager ya me di cuenta de que era lo mismo.

apliqué el fix de elnetotaca puesto que me gusta mas ver lo que pongo en los archivos de configuración que no que me lo haga un programa solito, al final eso es lo que me atrajo del linux.

Gracias a los dos pero desafortunadamente ninguna de las soluciones propuestas ha funcionado, seguiré investigando por mi cuenta a la par que siguiendo esto a ver si lo puedo solucionar.

Gracias de nuevo!

+1
0
-1
Imagen de javi600
+1
0
-1

Ah dale , bueno cualquier cosa si encuentro alguna otra solucion te pego el grito, abrazo che suerte :)

+1
0
-1
Imagen de elnetotaca
+1
0
-1

si eso no te funcionó, en la terminal ejecuta esto;
dmesg | less

y pegas aqui lo que sale, una vez arreglemos el problema te explico para que sirve todo esto.
Saludos

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

Hey elnetotaca!

dmesg | less

[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 2.6.35-28-generic-pae (buildd@rothera) (gcc version 4.4.5 (Ubuntu/Linaro 4.4.4-14ubuntu5) ) #50-Ubuntu SMP Fri Mar 18 20:43:15 UTC 2011 (Ubuntu 2.6.35-28.50-generic-pae 2.6.35.11)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
[ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000080000000 (usable)
[ 0.000000] BIOS-e820: 0000000080000000 - 0000000090000000 (reserved)
[ 0.000000] BIOS-e820: 0000000090000000 - 00000000be86e000 (usable)
[ 0.000000] BIOS-e820: 00000000be86e000 - 00000000be870000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000be870000 - 00000000be871000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000be871000 - 00000000be873000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000be873000 - 00000000be88e000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000be88e000 - 00000000bea8f000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bea8f000 - 00000000bfec6000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] BIOS-e820: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000d3300000 - 00000000d3301000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.4 present.
[ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] last_pfn = 0x140000 max_arch_pfn = 0x1000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-FFFFF uncachable
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 disabled
[ 0.000000] 1 base 000000000 mask F80000000 write-back
[ 0.000000] 2 base 080000000 mask FC0000000 write-back
[ 0.000000] 3 base 100000000 mask FC0000000 write-back
[ 0.000000] 4 base 0BFF00000 mask FFFF00000 uncachable
[ 0.000000] 5 disabled
[ 0.000000] 6 disabled
[ 0.000000] 7 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] e820 update range: 00000000bff00000 - 0000000100000000 (usable) ==> (reserved)
[ 0.000000] e820 update range: 0000000000002000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] Scanning 1 areas for low memory corruption
[ 0.000000] modified physical RAM map:
[ 0.000000] modified: 0000000000000000 - 0000000000001000 (reserved)
[ 0.000000] modified: 0000000000001000 - 0000000000002000 (usable)
[ 0.000000] modified: 0000000000002000 - 0000000000010000 (reserved)
[ 0.000000] modified: 0000000000010000 - 000000000009fc00 (usable)
[ 0.000000] modified: 000000000009fc00 - 00000000000a0000 (reserved)
[ 0.000000] modified: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] modified: 0000000000100000 - 0000000080000000 (usable)
[ 0.000000] modified: 0000000080000000 - 0000000090000000 (reserved)
[ 0.000000] modified: 0000000090000000 - 00000000be86e000 (usable)
[ 0.000000] modified: 00000000be86e000 - 00000000be870000 (ACPI NVS)
[ 0.000000] modified: 00000000be870000 - 00000000be871000 (ACPI data)
[ 0.000000] modified: 00000000be871000 - 00000000be873000 (ACPI NVS)
[ 0.000000] modified: 00000000be873000 - 00000000be88e000 (ACPI data)
[ 0.000000] modified: 00000000be88e000 - 00000000bea8f000 (ACPI NVS)
[ 0.000000] modified: 00000000bea8f000 - 00000000bfec6000 (ACPI data)
[ 0.000000] modified: 00000000bfec6000 - 00000000bfec8000 (ACPI NVS)
[ 0.000000] modified: 00000000bfec8000 - 00000000bfec9000 (ACPI data)
[ 0.000000] modified: 00000000bfec9000 - 00000000bfecb000 (ACPI NVS)
[ 0.000000] modified: 00000000bfecb000 - 00000000bfecd000 (ACPI data)
[ 0.000000] modified: 00000000bfecd000 - 00000000bfedf000 (ACPI NVS)
[ 0.000000] modified: 00000000bfedf000 - 00000000bfef9000 (ACPI data)
[ 0.000000] modified: 00000000bfef9000 - 00000000bfeff000 (reserved)
[ 0.000000] modified: 00000000bfeff000 - 00000000bff00000 (ACPI data)
[ 0.000000] modified: 00000000d3300000 - 00000000d3301000 (reserved)
[ 0.000000] modified: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] modified: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] modified: 00000000ffc00000 - 0000000100000000 (reserved)
[ 0.000000] modified: 0000000100000000 - 0000000140000000 (usable)
[ 0.000000] initial memory mapped : 0 - 00e00000
[ 0.000000] init_memory_mapping: 0000000000000000-0000000037bfe000
[ 0.000000] 0000000000 - 0000200000 page 4k
[ 0.000000] 0000200000 - 0037a00000 page 2M
[ 0.000000] 0037a00000 - 0037bfe000 page 4k
[ 0.000000] kernel direct mapping tables up to 37bfe000 @ 15000-1a000
[ 0.000000] RAMDISK: 36af9000 - 37ff0000
[ 0.000000] Allocated new RAMDISK: 00a06000 - 01efc803
[ 0.000000] Move RAMDISK from 0000000036af9000 - 0000000037fef802 to 00a06000 - 01efc802
[ 0.000000] ACPI: RSDP 000fe020 00024 (v02 APPLE )
[ 0.000000] ACPI: XSDT bfeee1c0 00074 (v01 APPLE Apple00 0000007D 01000013)
[ 0.000000] ACPI: FACP bfeec000 000F4 (v03 APPLE Apple00 0000007D Loki 0000005F)
[ 0.000000] ACPI: DSDT bfee0000 058CA (v01 APPLE MacBook 00050001 INTL 20061109)
[ 0.000000] ACPI: FACS bfecd000 00040
[ 0.000000] ACPI: HPET bfeeb000 00038 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: APIC bfeea000 00068 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: MCFG bfee9000 0003C (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ASF! bfee8000 000A5 (v32 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SBST bfee7000 00030 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: ECDT bfee6000 00053 (v01 APPLE Apple00 00000001 Loki 0000005F)
[ 0.000000] ACPI: SSDT bfec8000 004DC (v01 APPLE CpuPm 00003000 INTL 20061109)
[ 0.000000] ACPI: SSDT bfedf000 000A5 (v01 SataRe SataPri 00001000 INTL 20061109)
[ 0.000000] ACPI: SSDT bfecc000 0009F (v01 SataRe SataSec 00001000 INTL 20061109)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] 4228MB HIGHMEM available.
[ 0.000000] 891MB LOWMEM available.
[ 0.000000] mapped low ram: 0 - 37bfe000
[ 0.000000] low ram: 0 - 37bfe000
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000001 -> 0x00001000
[ 0.000000] Normal 0x00001000 -> 0x00037bfe
[ 0.000000] HighMem 0x00037bfe -> 0x00140000
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] early_node_map[5] active PFN ranges
[ 0.000000] 0: 0x00000001 -> 0x00000002
[ 0.000000] 0: 0x00000010 -> 0x0000009f
[ 0.000000] 0: 0x00000100 -> 0x00080000
[ 0.000000] 0: 0x00090000 -> 0x000be86e
[ 0.000000] 0: 0x00100000 -> 0x00140000
[ 0.000000] On node 0 totalpages: 976894
[ 0.000000] free_area_init_node: node 0, pgdat c0840cc0, node_mem_map c1efe020
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 3952 pages, LIFO batch:0
[ 0.000000] Normal zone: 1752 pages used for memmap
[ 0.000000] Normal zone: 222502 pages, LIFO batch:31
[ 0.000000] HighMem zone: 8457 pages used for memmap
[ 0.000000] HighMem zone: 740199 pages, LIFO batch:31
[ 0.000000] Using APIC driver default
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
[ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
[ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x10de8201 base: 0xfed00000
[ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] early_res array is doubled to 64 at [16000 - 167ff]
[ 0.000000] PM: Registered nosave memory: 0000000000002000 - 0000000000010000
[ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] Allocating PCI resources starting at d3301000 (gap: d3301000:1ccff000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:8 nr_cpumask_bits:8 nr_cpu_ids:2 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 15 pages/cpu @c4800000 s39872 r0 d21568 u1048576
[ 0.000000] early_res array is doubled to 128 at [16800 - 177ff]
[ 0.000000] pcpu-alloc: s39872 r0 d21568 u1048576 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 966653
[ 0.000000] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.35-28-generic-pae root=UUID=d0807f16-d921-47ad-8eed-b18421700861 ro splash vga=789 quiet splash nomodeset video=uvesafb:mode_option=1280×1024-24,mtrr=3,scroll=ywrap
[ 0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
[ 0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 0.000000] Enabling fast FPU save and restore... done.
[ 0.000000] Enabling unmasked SIMD FPU exception support... done.
[ 0.000000] Initializing CPU#0
[ 0.000000] allocated 26214380 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] Subtract (62 early reservations)
[ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE
[ 0.000000] #2 [0000100000 - 00009fd65c] TEXT DATA BSS
[ 0.000000] #3 [000009fc00 - 0000100000] BIOS reserved
[ 0.000000] #4 [00009fe000 - 0000a051b1] BRK
[ 0.000000] #5 [0000010000 - 0000011000] TRAMPOLINE
[ 0.000000] #6 [0000011000 - 0000015000] ACPI WAKEUP
[ 0.000000] #7 [0000015000 - 0000016000] PGTABLE
[ 0.000000] #8 [0000a06000 - 0001efd000] NEW RAMDISK
[ 0.000000] #9 [0001efd000 - 0001efe000] BOOTMEM
[ 0.000000] #10 [0001efe000 - 00046fe000] BOOTMEM
[ 0.000000] #11 [00046fe000 - 00046fe004] BOOTMEM
[ 0.000000] #12 [00046fe040 - 00046fe100] BOOTMEM
[ 0.000000] #13 [00046fe100 - 00046fe1a8] BOOTMEM
[ 0.000000] #14 [00046fe1c0 - 00047011c0] BOOTMEM
[ 0.000000] #15 [00047011c0 - 00047014dc] BOOTMEM
[ 0.000000] #16 [0004701500 - 000470d500] BOOTMEM
[ 0.000000] #17 [000470d500 - 000470d52d] BOOTMEM
[ 0.000000] #18 [000470d540 - 000470d56f] BOOTMEM
[ 0.000000] #19 [000470d580 - 000470d994] BOOTMEM
[ 0.000000] #20 [000470d9c0 - 000470da00] BOOTMEM
[ 0.000000] #21 [000470da00 - 000470da40] BOOTMEM
[ 0.000000] #22 [000470da40 - 000470da80] BOOTMEM
[ 0.000000] #23 [000470da80 - 000470dac0] BOOTMEM
[ 0.000000] #24 [000470dac0 - 000470db00] BOOTMEM
[ 0.000000] #25 [000470db00 - 000470db40] BOOTMEM
[ 0.000000] #26 [000470db40 - 000470db80] BOOTMEM
[ 0.000000] #27 [000470db80 - 000470dbc0] BOOTMEM
[ 0.000000] #28 [000470dbc0 - 000470dc00] BOOTMEM
[ 0.000000] #29 [000470dc00 - 000470dc40] BOOTMEM
[ 0.000000] #30 [000470dc40 - 000470dc80] BOOTMEM
[ 0.000000] #31 [000470dc80 - 000470dcc0] BOOTMEM
[ 0.000000] #32 [000470dcc0 - 000470dd00] BOOTMEM
[ 0.000000] #33 [000470dd00 - 000470dd40] BOOTMEM
[ 0.000000] #34 [000470dd40 - 000470dd80] BOOTMEM
[ 0.000000] #35 [000470dd80 - 000470ddc0] BOOTMEM
[ 0.000000] #36 [000470ddc0 - 000470de00] BOOTMEM
[ 0.000000] #37 [000470de00 - 000470de40] BOOTMEM
[ 0.000000] #38 [000470de40 - 000470de80] BOOTMEM
[ 0.000000] #39 [000470de80 - 000470dec0] BOOTMEM
[ 0.000000] #40 [000470dec0 - 000470df00] BOOTMEM
[ 0.000000] #41 [000470df00 - 000470df40] BOOTMEM
[ 0.000000] #42 [000470df40 - 000470df80] BOOTMEM
[ 0.000000] #43 [000470df80 - 000470dfc0] BOOTMEM
[ 0.000000] #44 [000470dfc0 - 000470e000] BOOTMEM
[ 0.000000] #45 [000470e000 - 000470e040] BOOTMEM
[ 0.000000] #46 [000470e040 - 000470e050] BOOTMEM
[ 0.000000] #47 [000470e080 - 000470e090] BOOTMEM
[ 0.000000] #48 [000470e0c0 - 000470e183] BOOTMEM
[ 0.000000] #49 [000470e1c0 - 000470e283] BOOTMEM
[ 0.000000] #50 [0004800000 - 000480f000] BOOTMEM
[ 0.000000] #51 [0004900000 - 000490f000] BOOTMEM
[ 0.000000] #52 [00047102c0 - 00047102c4] BOOTMEM
[ 0.000000] #53 [0004710300 - 0004710304] BOOTMEM
[ 0.000000] #54 [0004710340 - 0004710348] BOOTMEM
[ 0.000000] #55 [0004710380 - 0004710388] BOOTMEM
[ 0.000000] #56 [00047103c0 - 0004710460] BOOTMEM
[ 0.000000] #57 [0004710480 - 00047104c8] BOOTMEM
[ 0.000000] #58 [0004710500 - 0004714500] BOOTMEM
[ 0.000000] #59 [0004714500 - 0004794500] BOOTMEM
[ 0.000000] #60 [0004794500 - 00047d4500] BOOTMEM
[ 0.000000] #61 [000490f000 - 000620efec] BOOTMEM
[ 0.000000] Initializing HighMem for node 0 (00037bfe:00140000)
[ 0.000000] Memory: 3809300k/5242880k available (5092k kernel code, 98276k reserved, 2433k data, 708k init, 2994624k highmem)
[ 0.000000] virtual kernel memory layout:
[ 0.000000] fixmap : 0xfff16000 - 0xfffff000 ( 932 kB)
[ 0.000000] pkmap : 0xffc00000 - 0xffe00000 (2048 kB)
[ 0.000000] vmalloc : 0xf83fe000 - 0xffbfe000 ( 120 MB)
[ 0.000000] lowmem : 0xc0000000 - 0xf7bfe000 ( 891 MB)
[ 0.000000] .init : 0xc085a000 - 0xc090b000 ( 708 kB)
[ 0.000000] .data : 0xc05f931a - 0xc0859908 (2433 kB)
[ 0.000000] .text : 0xc0100000 - 0xc05f931a (5092 kB)
[ 0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
[ 0.000000] SLUB: Genslabs=13, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] RCU dyntick-idle grace-period acceleration is enabled.
[ 0.000000] RCU-based detection of stalled CPUs is disabled.
[ 0.000000] Verbose stalled-CPUs detection is disabled.
[ 0.000000] NR_IRQS:2304 nr_irqs:512
[ 0.000000] Extended CMOS year: 2000
[ 0.000000] spurious 8259A interrupt: IRQ7.
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.000000] Detected 1989.750 MHz processor.
[ 0.004005] Calibrating delay loop (skipped), value calculated using timer frequency.. 3979.50 BogoMIPS (lpj=7959000)
[ 0.004012] pid_max: default: 32768 minimum: 301
[ 0.004033] Security Framework initialized
[ 0.004052] AppArmor: AppArmor initialized
[ 0.004055] Yama: becoming mindful.
[ 0.004123] Mount-cache hash table entries: 512
[ 0.004270] Initializing cgroup subsys ns
[ 0.004276] Initializing cgroup subsys cpuacct
[ 0.004282] Initializing cgroup subsys memory
[ 0.004292] Initializing cgroup subsys devices
[ 0.004295] Initializing cgroup subsys freezer
[ 0.004298] Initializing cgroup subsys net_cls
[ 0.004330] CPU: Physical Processor ID: 0
[ 0.004333] CPU: Processor Core ID: 0
[ 0.004336] mce: CPU supports 6 MCE banks
[ 0.004347] CPU0: Thermal monitoring enabled (TM2)
[ 0.004351] using mwait in idle threads.
[ 0.004359] Performance Events: PEBS fmt0+, Core2 events, Intel PMU driver.
[ 0.004368] ... version: 2
[ 0.004371] ... bit width: 40
[ 0.004373] ... generic registers: 2
[ 0.004375] ... value mask: 000000ffffffffff
[ 0.004378] ... max period: 000000007fffffff
[ 0.004380] ... fixed-purpose events: 3
[ 0.004383] ... event mask: 0000000700000003
[ 0.010326] ACPI: Core revision 20100428
[ 0.022290] ftrace: converting mcount calls to 0f 1f 44 00 00
[ 0.022297] ftrace: allocating 22398 entries in 44 pages
[ 0.024056] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.024456] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.067541] CPU0: Intel(R) Core(TM)2 Duo CPU P7350 @ 2.00GHz stepping 06
[ 0.068000] Booting Node 0, Processors #1 Ok.
[ 0.008000] Initializing CPU#1
[ 0.156016] Brought up 2 CPUs
[ 0.156020] Total of 2 processors activated (7959.47 BogoMIPS).
[ 0.156897] devtmpfs: initialized
[ 0.156897] Apple MacBook5 series board detected. Selecting PCI-method for reboots.
[ 0.157298] regulator: core version 0.5
[ 0.157358] Time: 6:50:26 Date: 06/01/11
[ 0.157407] NET: Registered protocol family 16
[ 0.157433] Trying to unpack rootfs image as initramfs...
[ 0.157565] EISA bus registered
[ 0.157575] ACPI: bus type pci registered
[ 0.157893] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xf0000000-0xffffffff] (base 0xf0000000)
[ 0.157898] PCI: MMCONFIG at [mem 0xf0000000-0xffffffff] reserved in E820
[ 0.157903] PCI: MMCONFIG for 0000 [bus00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000) (size reduced!)
[ 0.157906] PCI: Using MMCONFIG for extended config space
[ 0.157908] PCI: Using configuration type 1 for base access
[ 0.164149] bio: create slab at 0
[ 0.166743] ACPI: EC: EC description table is found, configuring boot EC
[ 0.171819] ACPI: BIOS _OSI(Linux) query ignored
[ 0.173250] ACPI: SSDT bfecac98 001F6 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.173935] ACPI: Dynamic OEM Table Load:
[ 0.173940] ACPI: SSDT (null) 001F6 (v01 APPLE Cpu0Ist 00003000 INTL 20061109)
[ 0.174226] ACPI: SSDT bfec9c18 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.174885] ACPI: Dynamic OEM Table Load:
[ 0.174890] ACPI: SSDT (null) 002AD (v01 APPLE Cpu0Cst 00003001 INTL 20061109)
[ 0.175471] ACPI: SSDT bfecaf18 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.176150] ACPI: Dynamic OEM Table Load:
[ 0.176154] ACPI: SSDT (null) 000C8 (v01 APPLE Cpu1Ist 00003000 INTL 20061109)
[ 0.176357] ACPI: SSDT bfec9f18 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.177014] ACPI: Dynamic OEM Table Load:
[ 0.177018] ACPI: SSDT (null) 00085 (v01 APPLE Cpu1Cst 00003000 INTL 20061109)
[ 0.177691] ACPI: Interpreter enabled
[ 0.177698] ACPI: (supports S0 S3 S4 S5)
[ 0.177728] ACPI: Using IOAPIC for interrupt routing
[ 0.199532] ACPI: EC: GPE = 0x3f, I/O: command/status = 0x66, data = 0x62
[ 0.200391] ACPI: No dock devices found.
[ 0.200397] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.200794] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
[ 0.201109] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.201114] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.201118] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.201121] pci_root PNP0A08:00: host bridge window [mem 0x000c0000-0x000c3fff]
[ 0.201125] pci_root PNP0A08:00: host bridge window [mem 0x000c4000-0x000c7fff]
[ 0.201129] pci_root PNP0A08:00: host bridge window [mem 0x000c8000-0x000cbfff]
[ 0.201133] pci_root PNP0A08:00: address space collision: host bridge window [mem 0x000cc000-0x000cffff] conflicts with Video ROM [mem 0x000c0000-0x000ce3ff]
[ 0.201137] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000d3fff]
[ 0.201141] pci_root PNP0A08:00: host bridge window [mem 0x000d4000-0x000d7fff]
[ 0.201145] pci_root PNP0A08:00: host bridge window [mem 0x000d8000-0x000dbfff]
[ 0.201148] pci_root PNP0A08:00: host bridge window [mem 0x000dc000-0x000dffff]
[ 0.201152] pci_root PNP0A08:00: host bridge window [mem 0x000e0000-0x000e3fff]
[ 0.201156] pci_root PNP0A08:00: host bridge window [mem 0x000e4000-0x000e7fff]
[ 0.201159] pci_root PNP0A08:00: host bridge window [mem 0x000e8000-0x000ebfff]
[ 0.201163] pci_root PNP0A08:00: host bridge window [mem 0x000ec000-0x000effff]
[ 0.201167] pci_root PNP0A08:00: host bridge window [mem 0x000f0000-0x000fffff]
[ 0.201171] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xfebfffff]
[ 0.201404] pci 0000:00:03.0: reg 10: [io 0x2000-0x20ff]
[ 0.201515] pci 0000:00:03.2: reg 10: [io 0x2180-0x21bf]
[ 0.201533] pci 0000:00:03.2: reg 20: [io 0x2140-0x217f]
[ 0.201539] pci 0000:00:03.2: reg 24: [io 0x2100-0x213f]
[ 0.201566] pci 0000:00:03.2: PME# supported from D3hot D3cold
[ 0.201573] pci 0000:00:03.2: PME# disabled
[ 0.201750] pci 0000:00:03.5: reg 10: [mem 0xd3300000-0xd337ffff]
[ 0.201849] pci 0000:00:04.0: reg 10: [mem 0xd3388000-0xd3388fff]
[ 0.201886] pci 0000:00:04.0: supports D1 D2
[ 0.201889] pci 0000:00:04.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201894] pci 0000:00:04.0: PME# disabled
[ 0.201924] pci 0000:00:04.1: reg 10: [mem 0xd3389200-0xd33892ff]
[ 0.201968] pci 0000:00:04.1: supports D1 D2
[ 0.201970] pci 0000:00:04.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.201975] pci 0000:00:04.1: PME# disabled
[ 0.202012] pci 0000:00:06.0: reg 10: [mem 0xd3387000-0xd3387fff]
[ 0.202050] pci 0000:00:06.0: supports D1 D2
[ 0.202053] pci 0000:00:06.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202057] pci 0000:00:06.0: PME# disabled
[ 0.202086] pci 0000:00:06.1: reg 10: [mem 0xd3389100-0xd33891ff]
[ 0.202131] pci 0000:00:06.1: supports D1 D2
[ 0.202134] pci 0000:00:06.1: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202139] pci 0000:00:06.1: PME# disabled
[ 0.202175] pci 0000:00:08.0: reg 10: [mem 0xd3380000-0xd3383fff]
[ 0.202213] pci 0000:00:08.0: PME# supported from D3hot D3cold
[ 0.202218] pci 0000:00:08.0: PME# disabled
[ 0.202291] pci 0000:00:0a.0: reg 10: [mem 0xd3386000-0xd3386fff]
[ 0.202297] pci 0000:00:0a.0: reg 14: [io 0x21e0-0x21e7]
[ 0.202303] pci 0000:00:0a.0: reg 18: [mem 0xd3389000-0xd33890ff]
[ 0.202310] pci 0000:00:0a.0: reg 1c: [mem 0xd3389300-0xd338930f]
[ 0.202340] pci 0000:00:0a.0: supports D1 D2
[ 0.202343] pci 0000:00:0a.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202348] pci 0000:00:0a.0: PME# disabled
[ 0.202379] pci 0000:00:0b.0: reg 10: [io 0x21d8-0x21df]
[ 0.202385] pci 0000:00:0b.0: reg 14: [io 0x21ec-0x21ef]
[ 0.202391] pci 0000:00:0b.0: reg 18: [io 0x21d0-0x21d7]
[ 0.202397] pci 0000:00:0b.0: reg 1c: [io 0x21e8-0x21eb]
[ 0.202403] pci 0000:00:0b.0: reg 20: [io 0x21c0-0x21cf]
[ 0.202409] pci 0000:00:0b.0: reg 24: [mem 0xd3384000-0xd3385fff]
[ 0.202490] pci 0000:00:10.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202495] pci 0000:00:10.0: PME# disabled
[ 0.202701] pci 0000:00:15.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.202710] pci 0000:00:15.0: PME# disabled
[ 0.202827] pci 0000:00:09.0: PCI bridge to [bus 01-01] (subtractive decode)
[ 0.202833] pci 0000:00:09.0: bridge window [io 0xf000-0x0000] (disabled)
[ 0.202838] pci 0000:00:09.0: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.202843] pci 0000:00:09.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.202847] pci 0000:00:09.0: bridge window [io 0x0000-0x0cf7] (subtractive decode)
[ 0.202850] pci 0000:00:09.0: bridge window [io 0x0d00-0xffff] (subtractive decode)
[ 0.202854] pci 0000:00:09.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode)
[ 0.202857] pci 0000:00:09.0: bridge window [mem 0x000c0000-0x000c3fff] (subtractive decode)
[ 0.202861] pci 0000:00:09.0: bridge window [mem 0x000c4000-0x000c7fff] (subtractive decode)
[ 0.202865] pci 0000:00:09.0: bridge window [mem 0x000c8000-0x000cbfff] (subtractive decode)
[ 0.202868] pci 0000:00:09.0: bridge window [mem 0x000d0000-0x000d3fff] (subtractive decode)
[ 0.202872] pci 0000:00:09.0: bridge window [mem 0x000d4000-0x000d7fff] (subtractive decode)
[ 0.202876] pci 0000:00:09.0: bridge window [mem 0x000d8000-0x000dbfff] (subtractive decode)
[ 0.202879] pci 0000:00:09.0: bridge window [mem 0x000dc000-0x000dffff] (subtractive decode)
[ 0.202883] pci 0000:00:09.0: bridge window [mem 0x000e0000-0x000e3fff] (subtractive decode)
[ 0.202886] pci 0000:00:09.0: bridge window [mem 0x000e4000-0x000e7fff] (subtractive decode)
[ 0.202890] pci 0000:00:09.0: bridge window [mem 0x000e8000-0x000ebfff] (subtractive decode)
[ 0.202894] pci 0000:00:09.0: bridge window [mem 0x000ec000-0x000effff] (subtractive decode)
[ 0.202897] pci 0000:00:09.0: bridge window [mem 0x000f0000-0x000fffff] (subtractive decode)
[ 0.202901] pci 0000:00:09.0: bridge window [mem 0xc0000000-0xfebfffff] (subtractive decode)
[ 0.202957] pci 0000:02:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.202970] pci 0000:02:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.202981] pci 0000:02:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.202989] pci 0000:02:00.0: reg 24: [io 0x1000-0x107f]
[ 0.202996] pci 0000:02:00.0: reg 30: [mem 0xd3000000-0xd301ffff pref]
[ 0.203062] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.203068] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[ 0.203073] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.203079] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.203416] pci 0000:03:00.0: reg 10: [mem 0xd3100000-0xd3103fff 64bit]
[ 0.203484] pci 0000:03:00.0: supports D1 D2
[ 0.203487] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.203493] pci 0000:03:00.0: PME# disabled
[ 0.208179] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.208195] pci 0000:00:15.0: bridge window [io 0xfffff000-0x0000] (disabled)
[ 0.208205] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.208221] pci 0000:00:15.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled)
[ 0.208247] pci_bus 0000:00: on NUMA node 0
[ 0.208254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.208689] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.IXVE._PRT]
[ 0.288193] ACPI: PCI Interrupt Link [LNK1] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.288529] ACPI: PCI Interrupt Link [LNK2] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.288860] ACPI: PCI Interrupt Link [LNK3] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.289190] ACPI: PCI Interrupt Link [LNK4] (IRQs 5 7 10 11 14 15) *0, disabled.
[ 0.289521] ACPI: PCI Interrupt Link [Z003] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.289853] ACPI: PCI Interrupt Link [Z004] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.290185] ACPI: PCI Interrupt Link [Z005] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.290517] ACPI: PCI Interrupt Link [Z006] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.290849] ACPI: PCI Interrupt Link [Z007] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.291181] ACPI: PCI Interrupt Link [Z008] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.291513] ACPI: PCI Interrupt Link [Z009] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.291846] ACPI: PCI Interrupt Link [Z00A] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.292190] ACPI: PCI Interrupt Link [Z00B] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.292523] ACPI: PCI Interrupt Link [Z00C] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.292855] ACPI: PCI Interrupt Link [Z00D] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.293186] ACPI: PCI Interrupt Link [Z00E] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.293518] ACPI: PCI Interrupt Link [Z00F] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.293849] ACPI: PCI Interrupt Link [Z00G] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.294180] ACPI: PCI Interrupt Link [Z00H] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.294511] ACPI: PCI Interrupt Link [Z00I] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.294843] ACPI: PCI Interrupt Link [Z00J] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.295174] ACPI: PCI Interrupt Link [Z00K] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.295510] ACPI: PCI Interrupt Link [Z00L] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.295842] ACPI: PCI Interrupt Link [Z00M] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.296184] ACPI: PCI Interrupt Link [Z00N] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.296517] ACPI: PCI Interrupt Link [Z00O] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.296850] ACPI: PCI Interrupt Link [Z00P] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.297182] ACPI: PCI Interrupt Link [Z00Q] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.297514] ACPI: PCI Interrupt Link [Z00R] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.297845] ACPI: PCI Interrupt Link [Z00S] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.298178] ACPI: PCI Interrupt Link [Z00T] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.298512] ACPI: PCI Interrupt Link [Z00U] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.298845] ACPI: PCI Interrupt Link [LSMB] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.299177] ACPI: PCI Interrupt Link [LUS0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.299513] ACPI: PCI Interrupt Link [LUS2] (IRQs 16 17 18 19 20 21 22 23) *10
[ 0.299848] ACPI: PCI Interrupt Link [LMAC] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.300193] ACPI: PCI Interrupt Link [LAZA] (IRQs 16 17 18 19 20 21 22 23) *15
[ 0.300529] ACPI: PCI Interrupt Link [LGPU] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.300865] ACPI: PCI Interrupt Link [LPID] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.301197] ACPI: PCI Interrupt Link [LSI0] (IRQs 16 17 18 19 20 21 22 23) *11
[ 0.301527] ACPI: PCI Interrupt Link [LSI1] (IRQs 16 17 18 19 20 21 22 23) *0, disabled.
[ 0.301859] ACPI: PCI Interrupt Link [Z000] (IRQs 16 17 18 19 20 21 22 23) *7
[ 0.302190] ACPI: PCI Interrupt Link [Z001] (IRQs 16 17 18 19 20 21 22 23) *5
[ 0.302522] ACPI: PCI Interrupt Link [LPMU] (IRQs 16 17 18 19 20 21 22 23) *14
[ 0.302620] HEST: Table is not found!
[ 0.302737] vgaarb: device added: PCI:0000:02:00.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.302742] vgaarb: loaded
[ 0.302952] SCSI subsystem initialized
[ 0.303040] libata version 3.00 loaded.
[ 0.303108] usbcore: registered new interface driver usbfs
[ 0.303124] usbcore: registered new interface driver hub
[ 0.303157] usbcore: registered new device driver usb
[ 0.303330] ACPI: WMI: Mapper loaded
[ 0.303332] PCI: Using ACPI for IRQ routing
[ 0.303337] PCI: pci_cache_line_size set to 64 bytes
[ 0.303615] reserve RAM buffer: 0000000000002000 - 000000000000ffff
[ 0.303621] reserve RAM buffer: 000000000009fc00 - 000000000009ffff
[ 0.303624] reserve RAM buffer: 00000000be86e000 - 00000000bfffffff
[ 0.303749] NetLabel: Initializing
[ 0.303752] NetLabel: domain hash size = 128
[ 0.303754] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.303769] NetLabel: unlabeled traffic allowed by default
[ 0.303807] HPET: 4 timers in total, 0 timers will be used for per-cpu timer
[ 0.303816] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 31, 31
[ 0.303823] hpet0: 4 comparators, 64-bit 25.000000 MHz counter
[ 0.308030] Switching to clocksource tsc
[ 0.321982] AppArmor: AppArmor Filesystem Enabled
[ 0.322000] pnp: PnP ACPI init
[ 0.322022] ACPI: bus type pnp registered
[ 0.329190] pnp: PnP ACPI: found 8 devices
[ 0.329193] ACPI: ACPI bus type pnp unregistered
[ 0.329197] PnPBIOS: Disabled by ACPI PNP
[ 0.329215] system 00:01: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.329224] system 00:04: [mem 0xfed00000-0xfed003ff] has been reserved
[ 0.329233] system 00:06: [io 0x0400-0x047f] has been reserved
[ 0.329236] system 00:06: [io 0x0480-0x04ff] has been reserved
[ 0.329240] system 00:06: [io 0x0500-0x057f] has been reserved
[ 0.329244] system 00:06: [io 0x0580-0x05ff] has been reserved
[ 0.329247] system 00:06: [io 0x0800-0x087f] has been reserved
[ 0.329251] system 00:06: [io 0x0880-0x08ff] has been reserved
[ 0.329255] system 00:06: [io 0x2140-0x217f] has been reserved
[ 0.329259] system 00:06: [io 0x2100-0x213f] has been reserved
[ 0.329263] system 00:06: [io 0x04d0-0x04d1] has been reserved
[ 0.329267] system 00:06: [io 0x0295-0x0296] has been reserved
[ 0.365822] pci 0000:00:09.0: PCI bridge to [bus 01-01]
[ 0.365826] pci 0000:00:09.0: bridge window [io disabled]
[ 0.365834] pci 0000:00:09.0: bridge window [mem 0xd3200000-0xd32fffff]
[ 0.365838] pci 0000:00:09.0: bridge window [mem pref disabled]
[ 0.365845] pci 0000:00:10.0: PCI bridge to [bus 02-02]
[ 0.365849] pci 0000:00:10.0: bridge window [io 0x1000-0x1fff]
[ 0.365854] pci 0000:00:10.0: bridge window [mem 0xd2000000-0xd30fffff]
[ 0.365859] pci 0000:00:10.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.365865] pci 0000:00:15.0: PCI bridge to [bus 03-03]
[ 0.365868] pci 0000:00:15.0: bridge window [io disabled]
[ 0.365880] pci 0000:00:15.0: bridge window [mem 0xd3100000-0xd31fffff]
[ 0.365889] pci 0000:00:15.0: bridge window [mem pref disabled]
[ 0.365906] pci 0000:00:09.0: enabling device (0000 -> 0002)
[ 0.365914] pci 0000:00:09.0: setting latency timer to 64
[ 0.365925] pci 0000:00:10.0: setting latency timer to 64
[ 0.366456] ACPI: PCI Interrupt Link [Z00F] enabled at IRQ 23
[ 0.366463] alloc irq_desc for 23 on node -1
[ 0.366466] alloc kstat_irqs on node -1
[ 0.366477] pci 0000:00:15.0: PCI INT A -> Link[Z00F] -> GSI 23 (level, low) -> IRQ 23
[ 0.366487] pci 0000:00:15.0: setting latency timer to 64
[ 0.366495] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.366499] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.366502] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.366505] pci_bus 0000:00: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.366509] pci_bus 0000:00: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.366512] pci_bus 0000:00: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.366515] pci_bus 0000:00: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.366519] pci_bus 0000:00: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.366522] pci_bus 0000:00: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.366525] pci_bus 0000:00: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.366529] pci_bus 0000:00: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.366532] pci_bus 0000:00: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.366535] pci_bus 0000:00: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.366539] pci_bus 0000:00: resource 17 [mem 0x000ec000-0x000effff]
[ 0.366542] pci_bus 0000:00: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.366545] pci_bus 0000:00: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.366549] pci_bus 0000:01: resource 1 [mem 0xd3200000-0xd32fffff]
[ 0.366552] pci_bus 0000:01: resource 4 [io 0x0000-0x0cf7]
[ 0.366556] pci_bus 0000:01: resource 5 [io 0x0d00-0xffff]
[ 0.366559] pci_bus 0000:01: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.366562] pci_bus 0000:01: resource 7 [mem 0x000c0000-0x000c3fff]
[ 0.366565] pci_bus 0000:01: resource 8 [mem 0x000c4000-0x000c7fff]
[ 0.366569] pci_bus 0000:01: resource 9 [mem 0x000c8000-0x000cbfff]
[ 0.366572] pci_bus 0000:01: resource 10 [mem 0x000d0000-0x000d3fff]
[ 0.366575] pci_bus 0000:01: resource 11 [mem 0x000d4000-0x000d7fff]
[ 0.366579] pci_bus 0000:01: resource 12 [mem 0x000d8000-0x000dbfff]
[ 0.366582] pci_bus 0000:01: resource 13 [mem 0x000dc000-0x000dffff]
[ 0.366585] pci_bus 0000:01: resource 14 [mem 0x000e0000-0x000e3fff]
[ 0.366588] pci_bus 0000:01: resource 15 [mem 0x000e4000-0x000e7fff]
[ 0.366592] pci_bus 0000:01: resource 16 [mem 0x000e8000-0x000ebfff]
[ 0.366595] pci_bus 0000:01: resource 17 [mem 0x000ec000-0x000effff]
[ 0.366598] pci_bus 0000:01: resource 18 [mem 0x000f0000-0x000fffff]
[ 0.366602] pci_bus 0000:01: resource 19 [mem 0xc0000000-0xfebfffff]
[ 0.366605] pci_bus 0000:02: resource 0 [io 0x1000-0x1fff]
[ 0.366609] pci_bus 0000:02: resource 1 [mem 0xd2000000-0xd30fffff]
[ 0.366612] pci_bus 0000:02: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.366616] pci_bus 0000:03: resource 1 [mem 0xd3100000-0xd31fffff]
[ 0.366666] NET: Registered protocol family 2
[ 0.366750] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.367066] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.367545] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.367797] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.367800] TCP reno registered
[ 0.367804] UDP hash table entries: 512 (order: 2, 16384 bytes)
[ 0.367817] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
[ 0.367908] NET: Registered protocol family 1
[ 0.383754] pci 0000:02:00.0: Boot video device
[ 0.383917] PCI: CLS 256 bytes, default 64
[ 0.384158] cpufreq-nforce2: No nForce2 chipset.
[ 0.384195] Scanning for low memory corruption every 60 seconds
[ 0.384356] audit: initializing netlink socket (disabled)
[ 0.384369] type=2000 audit(1306911026.380:1): initialized
[ 0.398964] highmem bounce pool size: 64 pages
[ 0.398971] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.400842] VFS: Disk quotas dquot_6.5.2
[ 0.400924] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 0.401689] fuse init (API version 7.14)
[ 0.401805] msgmni has been set to 1591
[ 0.687266] Freeing initrd memory: 21468k freed
[ 0.700275] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.700281] io scheduler noop registered
[ 0.700284] io scheduler deadline registered
[ 0.700303] io scheduler cfq registered (default)
[ 0.700474] pcieport 0000:00:15.0: setting latency timer to 64
[ 0.700595] alloc irq_desc for 40 on node -1
[ 0.700598] alloc kstat_irqs on node -1
[ 0.700621] pcieport 0000:00:15.0: irq 40 for MSI/MSI-X
[ 0.700799] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.700827] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.701527] vesafb: framebuffer at 0xd1000000, mapped to 0xf8480000, using 1920k, total 1920k
[ 0.701531] vesafb: mode is 800x600x32, linelength=3200, pages=0
[ 0.701534] vesafb: scrolling: redraw
[ 0.701537] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.721977] Console: switching to colour frame buffer device 100x37
[ 0.742043] fb0: VESA VGA frame buffer device
[ 0.742069] intel_idle: MWAIT substates: 0x3122220
[ 0.742071] intel_idle: does not run on family 6 model 23
[ 0.742240] ACPI: AC Adapter [ADP1] (on-line)
[ 0.742363] input: Lid Switch as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0D:00/input/input0
[ 0.742432] ACPI: Lid Switch [LID0]
[ 0.742493] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input1
[ 0.742499] ACPI: Power Button [PWRB]
[ 0.742554] input: Sleep Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0E:00/input/input2
[ 0.742559] ACPI: Sleep Button [SLPB]
[ 0.742647] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.742651] ACPI: Power Button [PWRF]
[ 0.743239] ACPI: acpi_idle registered with cpuidle
[ 0.743479] Monitor-Mwait will be used to enter C-1 state
[ 0.743508] Monitor-Mwait will be used to enter C-2 state
[ 0.743533] Monitor-Mwait will be used to enter C-3 state
[ 0.743540] Marking TSC unstable due to TSC halts in idle
[ 0.743590] Switching to clocksource hpet
[ 0.754305] ERST: Table is not found!
[ 0.754410] isapnp: Scanning for PnP cards...
[ 0.754786] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 0.756660] brd: module loaded
[ 0.757374] loop: module loaded
[ 0.758138] ACPI: PCI Interrupt Link [LSI0] enabled at IRQ 22
[ 0.758144] alloc irq_desc for 22 on node -1
[ 0.758146] alloc kstat_irqs on node -1
[ 0.758153] pata_acpi 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 0.758185] pata_acpi 0000:00:0b.0: setting latency timer to 64
[ 0.758198] pata_acpi 0000:00:0b.0: PCI INT A disabled
[ 0.758591] Fixed MDIO Bus: probed
[ 0.758634] PPP generic driver version 2.4.2
[ 0.758680] tun: Universal TUN/TAP device driver, 1.6
[ 0.758683] tun: (C) 1999-2004 Max Krasnyansky
[ 0.758796] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 0.759287] ACPI: PCI Interrupt Link [LUS2] enabled at IRQ 21
[ 0.759291] alloc irq_desc for 21 on node -1
[ 0.759293] alloc kstat_irqs on node -1
[ 0.759300] ehci_hcd 0000:00:04.1: PCI INT B -> Link[LUS2] -> GSI 21 (level, low) -> IRQ 21
[ 0.759313] ehci_hcd 0000:00:04.1: setting latency timer to 64
[ 0.759317] ehci_hcd 0000:00:04.1: EHCI Host Controller
[ 0.759362] ehci_hcd 0000:00:04.1: new USB bus registered, assigned bus number 1
[ 0.759384] ehci_hcd 0000:00:04.1: debug port 1
[ 0.759394] ehci_hcd 0000:00:04.1: cache line size of 256 is not supported
[ 0.759416] ehci_hcd 0000:00:04.1: irq 21, io mem 0xd3389200
[ 0.772014] ehci_hcd 0000:00:04.1: USB 2.0 started, EHCI 1.00
[ 0.772172] hub 1-0:1.0: USB hub found
[ 0.772178] hub 1-0:1.0: 7 ports detected
[ 0.772737] ACPI: PCI Interrupt Link [Z001] enabled at IRQ 20
[ 0.772741] alloc irq_desc for 20 on node -1
[ 0.772744] alloc kstat_irqs on node -1
[ 0.772750] ehci_hcd 0000:00:06.1: PCI INT B -> Link[Z001] -> GSI 20 (level, low) -> IRQ 20
[ 0.772764] ehci_hcd 0000:00:06.1: setting latency timer to 64
[ 0.772768] ehci_hcd 0000:00:06.1: EHCI Host Controller
[ 0.772811] ehci_hcd 0000:00:06.1: new USB bus registered, assigned bus number 2
[ 0.772831] ehci_hcd 0000:00:06.1: debug port 1
[ 0.772840] ehci_hcd 0000:00:06.1: cache line size of 256 is not supported
[ 0.772859] ehci_hcd 0000:00:06.1: irq 20, io mem 0xd3389100
[ 0.784014] ehci_hcd 0000:00:06.1: USB 2.0 started, EHCI 1.00
[ 0.784150] hub 2-0:1.0: USB hub found
[ 0.784155] hub 2-0:1.0: 5 ports detected
[ 0.784365] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 0.784855] ACPI: PCI Interrupt Link [LUS0] enabled at IRQ 19
[ 0.784859] alloc irq_desc for 19 on node -1
[ 0.784862] alloc kstat_irqs on node -1
[ 0.784868] ohci_hcd 0000:00:04.0: PCI INT A -> Link[LUS0] -> GSI 19 (level, low) -> IRQ 19
[ 0.784881] ohci_hcd 0000:00:04.0: setting latency timer to 64
[ 0.784885] ohci_hcd 0000:00:04.0: OHCI Host Controller
[ 0.784928] ohci_hcd 0000:00:04.0: new USB bus registered, assigned bus number 3
[ 0.784954] ohci_hcd 0000:00:04.0: irq 19, io mem 0xd3388000
[ 0.842216] hub 3-0:1.0: USB hub found
[ 0.842223] hub 3-0:1.0: 7 ports detected
[ 0.842776] ACPI: PCI Interrupt Link [Z000] enabled at IRQ 18
[ 0.842780] alloc irq_desc for 18 on node -1
[ 0.842782] alloc kstat_irqs on node -1
[ 0.842789] ohci_hcd 0000:00:06.0: PCI INT A -> Link[Z000] -> GSI 18 (level, low) -> IRQ 18
[ 0.842802] ohci_hcd 0000:00:06.0: setting latency timer to 64
[ 0.842806] ohci_hcd 0000:00:06.0: OHCI Host Controller
[ 0.842850] ohci_hcd 0000:00:06.0: new USB bus registered, assigned bus number 4
[ 0.842876] ohci_hcd 0000:00:06.0: irq 18, io mem 0xd3387000
[ 0.877866] ACPI: Battery Slot [BAT0] (battery present)
[ 0.902132] hub 4-0:1.0: USB hub found
[ 0.902139] hub 4-0:1.0: 5 ports detected
[ 0.902219] uhci_hcd: USB Universal Host Controller Interface driver
[ 0.902315] PNP: No PS/2 controller found. Probing ports directly.
[ 0.903200] i8042.c: No controller found.
[ 0.903264] mice: PS/2 mouse device common for all mice
[ 0.903501] rtc_cmos 00:07: rtc core: registered rtc_cmos as rtc0
[ 0.903552] rtc0: alarms up to one year, y3k, 242 bytes nvram, hpet irqs
[ 0.903675] device-mapper: uevent: version 1.0.3
[ 0.903800] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com
[ 0.903871] device-mapper: multipath: version 1.1.1 loaded
[ 0.903875] device-mapper: multipath round-robin: version 1.0.0 loaded
[ 0.904028] EISA: Probing bus 0 at eisa.0
[ 0.904031] EISA: Cannot allocate resource for mainboard
[ 0.904034] Cannot allocate resource for EISA slot 1
[ 0.904037] Cannot allocate resource for EISA slot 2
[ 0.904040] Cannot allocate resource for EISA slot 3
[ 0.904042] Cannot allocate resource for EISA slot 4
[ 0.904045] Cannot allocate resource for EISA slot 5
[ 0.904048] Cannot allocate resource for EISA slot 6
[ 0.904050] Cannot allocate resource for EISA slot 7
[ 0.904053] Cannot allocate resource for EISA slot 8
[ 0.904055] EISA: Detected 0 cards.
[ 0.904217] cpuidle: using governor ladder
[ 0.904353] cpuidle: using governor menu
[ 0.904752] TCP cubic registered
[ 0.904919] NET: Registered protocol family 10
[ 0.905385] lo: Disabled Privacy Extensions
[ 0.905693] NET: Registered protocol family 17
[ 0.906507] Using IPI No-Shortcut mode
[ 0.906583] PM: Resume from disk failed.
[ 0.906594] registered taskstats version 1
[ 0.906999] Magic number: 15:494:821
[ 0.907097] rtc_cmos 00:07: setting system clock to 2011-06-01 06:50:27 UTC (1306911027)
[ 0.907101] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
[ 0.907102] EDD information not available.
[ 1.064128] isapnp: No Plug & Play device found
[ 1.064181] Freeing unused kernel memory: 708k freed
[ 1.064557] Write protecting the kernel text: 5096k
[ 1.064661] Write protecting the kernel read-only data: 2016k
[ 1.083690] udev[84]: starting version 163
[ 1.084041] usb 1-4: new high speed USB device using ehci_hcd and address 2
[ 1.156846] forcedeth: Reverse Engineered nForce ethernet driver. Version 0.64.
[ 1.157291] ACPI: PCI Interrupt Link [LMAC] enabled at IRQ 17
[ 1.157297] alloc irq_desc for 17 on node -1
[ 1.157300] alloc kstat_irqs on node -1
[ 1.157307] forcedeth 0000:00:0a.0: PCI INT A -> Link[LMAC] -> GSI 17 (level, low) -> IRQ 17
[ 1.157313] forcedeth 0000:00:0a.0: setting latency timer to 64
[ 1.225355] forcedeth 0000:00:0a.0: ifname eth0, PHY OUI 0x732 @ 1, addr 00:23:32:d2:c9:b2
[ 1.225361] forcedeth 0000:00:0a.0: highdma csum pwrctl gbit lnktim msi desc-v3
[ 1.225600] ahci 0000:00:0b.0: version 3.0
[ 1.225617] ahci 0000:00:0b.0: PCI INT A -> Link[LSI0] -> GSI 22 (level, low) -> IRQ 22
[ 1.225665] alloc irq_desc for 41 on node -1
[ 1.225668] alloc kstat_irqs on node -1
[ 1.225678] ahci 0000:00:0b.0: irq 41 for MSI/MSI-X
[ 1.225688] ahci 0000:00:0b.0: controller can't do PMP, turning off CAP_PMP
[ 1.225746] ahci 0000:00:0b.0: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3 impl IDE mode
[ 1.225750] ahci 0000:00:0b.0: flags: 64bit ncq sntf pm led pio slum part boh
[ 1.225755] ahci 0000:00:0b.0: setting latency timer to 64
[ 1.227274] scsi0 : ahci
[ 1.227391] scsi1 : ahci
[ 1.227463] scsi2 : ahci
[ 1.227534] scsi3 : ahci
[ 1.227602] scsi4 : ahci
[ 1.227680] scsi5 : ahci
[ 1.227898] ata1: SATA max UDMA/133 abar m8192@0xd3384000 port 0xd3384100 irq 41
[ 1.227902] ata2: SATA max UDMA/133 abar m8192@0xd3384000 port 0xd3384180 irq 41
[ 1.227904] ata3: DUMMY
[ 1.227906] ata4: DUMMY
[ 1.227908] ata5: DUMMY
[ 1.227909] ata6: DUMMY
[ 1.545124] ata1: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.545130] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.545572] ata1.00: ATA-8: FUJITSU MHZ2160BH FFS G1, 0081008C, max UDMA/100
[ 1.545576] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.546147] ata1.00: configured for UDMA/100
[ 1.549201] ata2.00: ATAPI: HL-DT-ST DVDRW GS21N, SA18, max UDMA/133
[ 1.554102] ata2.00: configured for UDMA/133
[ 1.560267] scsi 0:0:0:0: Direct-Access ATA FUJITSU MHZ2160B 0081 PQ: 0 ANSI: 5
[ 1.560430] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 1.560476] sd 0:0:0:0: [sda] 312581808 512-byte logical blocks: (160 GB/149 GiB)
[ 1.560557] sd 0:0:0:0: [sda] Write Protect is off
[ 1.560561] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.560583] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.560760] sda:
[ 1.576264] scsi 1:0:0:0: CD-ROM HL-DT-ST DVDRW GS21N SA18 PQ: 0 ANSI: 5
[ 1.587437] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda caddy
[ 1.587441] Uniform CD-ROM driver Revision: 3.20
[ 1.587556] sr 1:0:0:0: Attached scsi CD-ROM sr0
[ 1.587610] sr 1:0:0:0: Attached scsi generic sg1 type 5
[ 1.633620] sda1 sda2 sda3 sda4
[ 1.633954] sd 0:0:0:0: [sda] Attached SCSI disk
[ 1.896120] usb 4-1: new full speed USB device using ohci_hcd and address 2
[ 2.129131] hub 4-1:1.0: USB hub found
[ 2.132100] hub 4-1:1.0: 3 ports detected
[ 2.278326] uvesafb: NVIDIA Corporation, NVIDIA GeForce 9400M

[ 2.278329] - mcp79m97, Chip Rev , OEM: NVIDIA, VBE v3.0
[ 2.372432] uvesafb: protected mode interface info at c000:c8a0
[ 2.372436] uvesafb: pmi: set display start = c00cc903, set palette = c00cc95e
[ 2.372438] uvesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da
[ 2.443212] uvesafb: VBIOS/hardware doesn't support DDC transfers
[ 2.443214] uvesafb: no monitor limits have been set, default refresh rate will be used
[ 2.444072] uvesafb: scrolling: ywrap using protected mode interface, yres_virtual=8000
[ 2.444077] uvesafb: cannot reserve video memory at 0xd1000000
[ 2.444084] uvesafb: probe of uvesafb.0 failed with error -5
[ 2.449031] usb 4-2: new low speed USB device using ohci_hcd and address 3
[ 2.637545] EXT4-fs (sda4): mounted filesystem with ordered data mode. Opts: (null)
[ 2.972036] usb 3-5: new low speed USB device using ohci_hcd and address 2
[ 3.496054] usb 3-6: new full speed USB device using ohci_hcd and address 3
[ 3.810060] usb 4-1.1: new full speed USB device using ohci_hcd and address 4
[ 4.014095] usb 4-1.2: new full speed USB device using ohci_hcd and address 5
[ 4.206112] usb 4-1.3: new full speed USB device using ohci_hcd and address 6
[ 25.261386] udev[427]: starting version 163
[ 25.305304] lp: driver loaded but no devices found
[ 25.362972] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 25.381457] Adding 3906556k swap on /dev/sda3. Priority:-1 extents:1 across:3906556k
[ 25.444791] lib80211: common routines for IEEE802.11 drivers
[ 25.444795] lib80211_crypt: registered algorithm 'NULL'
[ 25.468637] nvidia_bl: MacBook 5,1 detected
[ 25.468666] nvidia_bl: Nvidia graphics adapter 10de:0863 (106b:00aa) detected
[ 25.473135] i2c i2c-0: nForce2 SMBus adapter at 0x2140
[ 25.473162] i2c i2c-1: nForce2 SMBus adapter at 0x2100
[ 25.534505] wl: module license 'MIXED/Proprietary' taints kernel.
[ 25.534509] Disabling lock debugging due to kernel taint
[ 25.539711] Linux agpgart interface v0.103
[ 25.540583] wl 0000:03:00.0: power state changed by ACPI to D0
[ 25.540835] wl 0000:03:00.0: power state changed by ACPI to D0
[ 25.540848] wl 0000:03:00.0: PCI INT A -> Link[Z00F] -> GSI 23 (level, low) -> IRQ 23
[ 25.540856] wl 0000:03:00.0: setting latency timer to 64
[ 25.740350] lib80211_crypt: registered algorithm 'TKIP'
[ 25.740596] eth1: Broadcom BCM432b 802.11 Hybrid Wireless Controller 5.60.48.36
[ 25.891041] Bluetooth: Core ver 2.15
[ 25.891088] NET: Registered protocol family 31
[ 25.891090] Bluetooth: HCI device and connection manager initialized
[ 25.891093] Bluetooth: HCI socket layer initialized
[ 25.893817] Bluetooth: Generic Bluetooth USB driver ver 0.6
[ 25.907604] usbcore: registered new interface driver btusb
[ 25.944825] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 16
[ 25.944832] alloc irq_desc for 16 on node -1
[ 25.944834] alloc kstat_irqs on node -1
[ 25.944842] HDA Intel 0000:00:08.0: PCI INT A -> Link[LAZA] -> GSI 16 (level, low) -> IRQ 16
[ 25.944845] hda_intel: Disable MSI for Nvidia chipset
[ 25.944886] HDA Intel 0000:00:08.0: setting latency timer to 64
[ 25.990033] applesmc: key=271 fan=1 temp=14 acc=1 lux=2 kbd=1
[ 26.031785] Linux video capture interface: v2.00
[ 26.035737] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8507)
[ 26.796784] input: applesmc as /devices/platform/applesmc.768/input/input4
[ 26.800211] Registered led device: smc::kbd_backlight
[ 26.836782] input: Built-in iSight as /devices/pci0000:00/0000:00:04.1/usb1/1-4/1-4:1.0/input/input5
[ 26.836868] usbcore: registered new interface driver uvcvideo
[ 26.836871] USB Video Class driver (v0.1.0)
[ 26.840433] type=1400 audit(1306911053.430:2): apparmor="STATUS" operation="profile_load" name="/sbin/dhclient3" pid=721 comm="apparmor_parser"
[ 26.841158] type=1400 audit(1306911053.430:3): apparmor="STATUS" operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=721 comm="apparmor_parser"
[ 26.841552] type=1400 audit(1306911053.430:4): apparmor="STATUS" operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" pid=721 comm="apparmor_parser"
[ 26.854634] type=1400 audit(1306911053.442:5): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=847 comm="apparmor_parser"
[ 26.854647] type=1400 audit(1306911053.442:6): apparmor="STATUS" operation="profile_replace" name="/sbin/dhclient3" pid=827 comm="apparmor_parser"
[ 26.855372] type=1400 audit(1306911053.442:7): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=827 comm="apparmor_parser"
[ 26.855397] type=1400 audit(1306911053.442:8): apparmor="STATUS" operation="profile_replace" name="/usr/lib/NetworkManager/nm-dhcp-client.action" pid=847 comm="apparmor_parser"
[ 26.855769] type=1400 audit(1306911053.442:9): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=827 comm="apparmor_parser"
[ 26.855793] type=1400 audit(1306911053.442:10): apparmor="STATUS" operation="profile_replace" name="/usr/lib/connman/scripts/dhclient-script" pid=847 comm="apparmor_parser"
[ 26.868784] usbcore: registered new interface driver hiddev
[ 26.876591] input: HID 05ac:820a as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.2/4-1.2:1.0/input/input6
[ 26.876685] generic-usb 0003:05AC:820A.0006: input,hidraw0: USB HID v1.11 Keyboard [HID 05ac:820a] on usb-0000:00:06.0-1.2/input0
[ 26.881564] input: HID 05ac:820b as /devices/pci0000:00/0000:00:06.0/usb4/4-1/4-1.3/4-1.3:1.0/input/input7
[ 26.881677] generic-usb 0003:05AC:820B.0007: input,hidraw1: USB HID v1.11 Mouse [HID 05ac:820b] on usb-0000:00:06.0-1.3/input0
[ 26.881699] usbcore: registered new interface driver usbhid
[ 26.881701] usbhid: USB HID core driver
[ 26.978631] input: bcm5974 as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.2/input/input8
[ 26.978733] usbcore: registered new interface driver bcm5974
[ 27.017684] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,user_xattr
[ 27.055292] apple 0003:05AC:8242.0003: hiddev96,hidraw2: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:04.0-5/input0
[ 27.062391] input: Apple, Inc. Apple Internal Keyboard / Trackpad as /devices/pci0000:00/0000:00:04.0/usb3/3-6/3-6:1.0/input/input9
[ 27.062474] apple 0003:05AC:0237.0004: input,hidraw3: USB HID v1.11 Keyboard [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input0
[ 27.071203] apple 0003:05AC:0237.0005: hidraw4: USB HID v1.11 Device [Apple, Inc. Apple Internal Keyboard / Trackpad] on usb-0000:00:04.0-6/input1
[ 27.109623] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.0/input/input10
[ 27.109722] logitech 0003:046D:C517.0001: input,hidraw5: USB HID v1.10 Keyboard [Logitech USB Receiver] on usb-0000:00:06.0-2/input0
[ 27.119044] logitech 0003:046D:C517.0002: fixing up Logitech keyboard report descriptor
[ 27.120665] input: Logitech USB Receiver as /devices/pci0000:00/0000:00:06.0/usb4/4-2/4-2:1.1/input/input11
[ 27.120824] logitech 0003:046D:C517.0002: input,hiddev97,hidraw6: USB HID v1.10 Mouse [Logitech USB Receiver] on usb-0000:00:06.0-2/input1
[ 27.349022] hda_codec: ALC889A: SKU not ready 0x400000f0
[ 27.384637] alloc irq_desc for 42 on node -1
[ 27.384641] alloc kstat_irqs on node -1
[ 27.384651] forcedeth 0000:00:0a.0: irq 42 for MSI/MSI-X
[ 27.384845] eth0: no link during initialization.
[ 27.385484] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 27.395163] type=1400 audit(1306911053.982:11): apparmor="STATUS" operation="profile_load" name="/usr/share/gdm/guest-session/Xsession" pid=1251 comm="apparmor_parser"
[ 27.689859] ACPI: PCI Interrupt Link [LPMU] enabled at IRQ 23
[ 27.689867] nvidia 0000:00:03.5: PCI INT B -> Link[LPMU] -> GSI 23 (level, low) -> IRQ 23
[ 27.689876] nvidia: probe of 0000:00:03.5 failed with error -1
[ 27.690285] ACPI: PCI Interrupt Link [LGPU] enabled at IRQ 22
[ 27.690289] nvidia 0000:02:00.0: PCI INT A -> Link[LGPU] -> GSI 22 (level, low) -> IRQ 22
[ 27.690296] nvidia 0000:02:00.0: setting latency timer to 64
[ 27.690301] vgaarb: device changed decodes: PCI:0000:02:00.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 27.690449] NVRM: loading NVIDIA UNIX x86 Kernel Module 260.19.06 Mon Sep 13 06:35:06 PDT 2010
[ 27.809340] ppdev: user-space parallel port driver
[ 33.103895] EXT4-fs (sda4): re-mounted. Opts: errors=remount-ro,user_xattr,commit=0
[ 37.793012] eth1: no IPv6 routers present
[ 43.473578] vboxdrv: Found 2 processor cores.
[ 43.474013] vboxdrv: fAsync=0 offMin=0x1a4 offMax=0x67a
[ 43.474562] vboxdrv: TSC mode is 'synchronous', kernel timer mode is 'normal'.
[ 43.474565] vboxdrv: Successfully loaded version 4.0.8 (interface 0x00180000).
[ 44.215883] Bluetooth: L2CAP ver 2.14
[ 44.215887] Bluetooth: L2CAP socket layer initialized
[ 44.285734] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 44.285738] Bluetooth: BNEP filters: protocol multicast
[ 44.345625] Bluetooth: SCO (Voice Link) ver 0.6
[ 44.345628] Bluetooth: SCO socket layer initialized
[ 44.393034] usb 4-1.2: USB disconnect, address 5
[ 44.530885] Bluetooth: RFCOMM TTY layer initialized
[ 44.530892] Bluetooth: RFCOMM socket layer initialized
[ 44.530895] Bluetooth: RFCOMM ver 1.11
[ 44.568033] usb 4-1.3: USB disconnect, address 6
[ 45.807934] applesmc: ThFH: read data fail
[ 45.889868] applesmc: Ts0S: read data fail
[ 70.892046] usb 1-1: new high speed USB device using ehci_hcd and address 5
[ 71.084465] Initializing USB Mass Storage driver...
[ 71.084614] scsi6 : usb-storage 1-1:1.0
[ 71.084760] usbcore: registered new interface driver usb-storage
[ 71.084763] USB Mass Storage support registered.
[ 73.402014] scsi 6:0:0:0: Direct-Access LGE USB Drive 1100 PQ: 0 ANSI: 0 CCS
[ 73.402648] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 73.405579] sd 6:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 73.406593] sd 6:0:0:0: [sdb] Write Protect is off
[ 73.406597] sd 6:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 73.406601] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 73.410579] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 73.410587] sdb: sdb1
[ 73.416226] sd 6:0:0:0: [sdb] Assuming drive cache: write through
[ 73.416232] sd 6:0:0:0: [sdb] Attached SCSI removable disk
[ 143.503714] usb 1-1: USB disconnect, address 5
[ 156.068408] warning: `VirtualBox' uses 32-bit capabilities (legacy support in use)
[ 164.749990] CE: hpet increased min_delta_ns to 7500 nsec
[ 204.344242] CE: hpet increased min_delta_ns to 11250 nsec
[ 204.344331] CE: hpet increased min_delta_ns to 16875 nsec
[ 337.324641] applesmc: TTF0: read data fail
[ 473.117062] usb 1-1: new high speed USB device using ehci_hcd and address 6
[ 473.253322] scsi7 : usb-storage 1-1:1.0
[ 475.621130] scsi 7:0:0:0: Direct-Access LGE USB Drive 1100 PQ: 0 ANSI: 0 CCS
[ 475.621829] sd 7:0:0:0: Attached scsi generic sg2 type 0
[ 475.624835] sd 7:0:0:0: [sdb] 15663104 512-byte logical blocks: (8.01 GB/7.46 GiB)
[ 475.626596] sd 7:0:0:0: [sdb] Write Protect is off
[ 475.626600] sd 7:0:0:0: [sdb] Mode Sense: 43 00 00 00
[ 475.626604] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 475.631589] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 475.631596] sdb: sdb1
[ 475.635594] sd 7:0:0:0: [sdb] Assuming drive cache: write through
[ 475.635599] sd 7:0:0:0: [sdb] Attached SCSI removable disk
[ 500.100960] applesmc: Ts0S: read data fail
[ 509.103607] usb 1-1: USB disconnect, address 6
[ 647.628276] applesmc: TN0D: read data fail
[ 665.790718] applesmc: F0Mn: write arg fail
[ 696.547626] ACPI: EC: GPE storm detected, transactions will use polling mode

Gracias por tu atención!!
ScarsFace

PS: Perdón por la tardanza, necesitaba dormir :S

+1
0
-1
Imagen de elnetotaca
+1
0
-1

mira, hay varias lineas de error ahí, lo que vamos a hacer es algo muy simple, esperemos que esto lo solucione;

sudo apt-get update
sudo apt-get upgrade
sudo apt-get -f install
sudo dpkg --configure -a
sudo dpkg-reconfigure

sudo apt-get update
sudo apt-get upgrade

restart pc

luego si aún persiste el error instalate el startup manager en el synaptic.
una vez lo tengas instalado abrelo, lo encuentras en;
menu>>sistema>>administración startup managet

cambiale la resolución a 1280×1024
con 24bits de colores.
luego reinicia y avisanos si te funcionó, caso contrario le vamos a tener que meter el visturí digital.

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

Hey ho!

He probado las dos cosas, y ninguna de ellas surtió efecto :S

Y aprovechando que poco hay que hacer he instalado el burg, es algo que tenia pendiente desde hace tiempo y ya que hay que tirar de visturí pues he dicho: lo hago y ya xd

Espero que esto no te estropee ninguna posible solución que hayas pensado. Si es así vuelvo al grub2.

Muchas gracias por todo.

PS: Después de instalar el burg el error sale el mismo pero por debajo se ve el verboose del boot, supongo que fue al marcar "show text on boot" desde el startup manager.

+1
0
-1
Imagen de elnetotaca
+1
0
-1

Ahora es algo similar;
mira
estos son los pasos;
si ya tienes instalado el burg;

gksu gedit /etc/default/burg
buscas la misma linea;
GRUB_CMDLINE_LINUX_DEFAULT

y tiene que quedar;
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap"

luego;
GRUB_GFXMODE
tiene que quedar;
GRUB_GFXMODE=1280x1024

guardas y luego en la terminal;

gksu gedit /etc/initramfs-tools/modules
pegas esto al final, si ya lo tiene no lo pegues
uvesafb mode_option=1280x1024-24 mtrr=3 scroll=ywrap

guardas

en la terminal
echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
sudo update-burg
sudo update-initramfs -u

resetea la maquina y a ver que pasa

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

Pues al editar la configuración del burg me he dado cuenta de que la linea que me has dicho que actualizara no está por ninguna parte, la añado al final o tengo que ponerla en alguna linea especifica.

Gracias!

# If you change this file, run 'update-burg' afterwards to update
# /boot/burg/burg.cfg.

GRUB_DEFAULT=0
GRUB_TIMEOUT=5
GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian`

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL=console

# If you want to enable the save default function, uncomment the following
# line, and set GRUB_DEFAULT to saved.
#GRUB_SAVEDEFAULT=true

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
# In the boot menu, use hotkey 'r' to popup a resolution selection menu.
GRUB_GFXMODE=1280x1024

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID=true

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

# GRUB_THEME's value can be 'saved' or a specific BURG theme name, you can also
# set it to the pathname of a GRUB2 theme file.
# In the boot menu, use hotkey 't' to popup a theme selection menu
GRUB_THEME=saved

# GRUB_FOLD's value can be 'saved', 'true' or 'false'.
# In the boot menu, use hotkey 'F7' to show the full list, 'f' to toggle
# between folding modes.
GRUB_FOLD=saved

# Add user with burg-adduser, then use GRUB_USERS to config authentication.
# The following example means user1 can boot Ubuntu, no password is needed to
# boot Windows, user1 amd user2 can boot other OS. Superusers can boot any OS
# and use hotkeys like `c' to enter console mode.
#GRUB_USERS="*=user1,user2:ubuntu=user1:windows="

# For a complete list of supported variables, refer to this wiki page:
# http://code.google.com/p/burg/wiki/ConfigurationVariables
GRUB_CMDLINE_LINUX=" splash vga=789"

+1
0
-1
Imagen de elnetotaca
+1
0
-1

mmmmm
no la veo por ningun lado;

GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap"

esa linea no la veo ahí.

agregala.
y luego

echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
sudo update-burg
sudo update-initramfs -u

asi se ve mi archivo;
# If you change this file, run 'update-burg' afterwards to update
# /boot/burg/burg.cfg.

GRUB_DEFAULT="0"
GRUB_TIMEOUT=15
GRUB_DISTRIBUTOR="`lsb_release -i -s 2> /dev/null || echo Debian`"
GRUB_CMDLINE_LINUX_DEFAULT="quiet splash nomodeset video=uvesafb:mode_option=1280x1024-24,mtrr=3,scroll=ywrap"
GRUB_CMDLINE_LINUX=""

# Uncomment to disable graphical terminal (grub-pc only)
#GRUB_TERMINAL="console"

# If you want to enable the save default function, uncomment the following
# line, and set GRUB_DEFAULT to saved.
#GRUB_SAVEDEFAULT="true"

# The resolution used on graphical terminal
# note that you can use only modes which your graphic card supports via VBE
# you can see them in real GRUB with the command `vbeinfo'
# In the boot menu, use hotkey 'r' to popup a resolution selection menu.

# Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux
#GRUB_DISABLE_LINUX_UUID="true"

# Uncomment to disable generation of recovery mode menu entries
#GRUB_DISABLE_LINUX_RECOVERY="true"

# Uncomment to get a beep at grub start
#GRUB_INIT_TUNE="480 440 1"

# GRUB_THEME's value can be 'saved' or a specific BURG theme name, you can also
# set it to the pathname of a GRUB2 theme file.
# In the boot menu, use hotkey 't' to popup a theme selection menu
GRUB_THEME="saved"

# GRUB_FOLD's value can be 'saved', 'true' or 'false'.
# In the boot menu, use hotkey 'F7' to show the full list, 'f' to toggle
# between folding modes.
GRUB_FOLD="saved"

# Add user with burg-adduser, then use GRUB_USERS to config authentication.
# The following example means user1 can boot Ubuntu, no password is needed to
# boot Windows, user1 amd user2 can boot other OS. Superusers can boot any OS
# and use hotkeys like `c' to enter console mode.
#GRUB_USERS="*=user1,user2:ubuntu=user1:windows="

# For a complete list of supported variables, refer to this wiki page:
# http://code.google.com/p/burg/wiki/ConfigurationVariables
GRUB_GFXMODE=1280x1024

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

Pues he arreglado el archivo de configuración para añadir la linea y bueno ahora volvemos a estar como al principio. Sale la linea esa "Could not start boot splash: Can not access a needed shared library" y ya no sale el verboose.

Gracias por toda la ayuda, yo ya casi habia tirado la toalla :D

+1
0
-1
Imagen de elnetotaca
+1
0
-1

ok, mira, ahora que agregastes la linea esa tienes que hacer esto;

echo FRAMEBUFFER=y | sudo tee /etc/initramfs-tools/conf.d/splash
sudo update-burg
sudo update-initramfs -u

luego reseteas

ya lo hicistes??

si reseteas y te sigue danto problemas entra en el burg manager

ahi tiene una opcion que dice algo como
burg-emu
click en ella, si funciona es que te va a funcionar el plymouth

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de elnetotaca
+1
0
-1

lo unico que se me ocurre es esto;
http://zorin-os.webs.com/splashscreenmanager.htm

una vez instalado, lo encuentras en
menu>>sistema>>administracion>>Splash screen manager

y ahí cambias el tema y te tiene que funcionar

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

Vale, nada de nada.

Lo que si me he dado cuenta de que en el Splash screen manager me sale como default text.plymouth el ubuntu-logo, y por mas veces k lo cambie a ubuntu-text sigue apareciendo el ubuntu-logo.

Que cosas mas raras me pasan no?

Gracias por todo amigo :)

+1
0
-1
Imagen de elnetotaca
+1
0
-1

que raro men!

dale en la terminal con esto

sudo echo FRAMEBUFFER=y > /etc/initramfs-tools/conf.d/splash

update-initramfs -u

a ver si hoy funciona

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

Nada de nada, desisto! jajaja

A lo mejor en una semana o dos pasa algo y lo arreglo :)

Gracias por todo tu tiempo y esfuerzo!

+1
0
-1
Imagen de elnetotaca
+1
0
-1

oye, y si activas el remote desktop
a la mejor te puedo ayudar.
no tires la toaya, a la mejor es algo facil, que te has saltado.

+1
0
-1

unzip; strip; touch; finger; mount; fsck; more; yes; unmount; sleep
Es lo que hago a diario....... En Linux mal pensados!

Imagen de ScarsFace
+1
0
-1

scars@AKmacbook:/lib/plymouth/themes$ ls -la
total 48
drwxr-xr-x 10 root root 4096 2011-06-01 23:07 .
drwxr-xr-x 4 root root 4096 2011-06-01 22:41 ..
-rw-r--r-- 1 scars dba 233 2011-06-01 23:07 default.plymouth
drwxr-xr-x 2 root root 4096 2011-06-01 22:41 details
drwxr-xr-x 2 root root 4096 2010-08-10 15:51 INT2MIL-Ubuntu-10.10-Spa
drwx------ 2 root root 4096 2010-12-21 21:41 Internauta
drwx------ 2 root root 4096 2010-08-14 18:02 orange
drwxr-xr-x 2 root root 4096 2011-05-31 23:52 script
drwxr-xr-x 2 root root 4096 2011-06-01 18:23 text
-rw-r--r-- 1 scars dba 233 2011-06-01 23:07 text.plymouth
drwxr-xr-x 2 root root 4096 2011-06-01 18:23 ubuntu-logo
drwxr-xr-x 2 root root 4096 2011-06-01 18:23 ubuntu-text

en text.plymouth y default.plymouth no deberia haber unos enlaces simbolicos hacia /etc?
y el user y group estan mal tambien (ya lo corregí).

Thankyus
ScarsFace.

+1
0
-1