no monta hd 1tb que antes si montaba

Imagen de legnaramso
0 puntos

Hola, tengo el siguiente problema y no se como resolverlo, el HD de 1tb me funcionada de repente, estaba viendo un video y este comenzo a detenerse, cerre el vlc lo volvi a abrir y segui el problema y luego cuando queria montar el hd donde tengo todo me sale esto:
Error mounting: mount exited with exit code 13: $MFTMirr does not match $MFT (record 0).
Failed to mount '/dev/sdb1': Input/output error
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice. The usage of the /f parameter is very
important! If the device is a SoftRAID/FakeRAID then first activate
it and mount a different device under the /dev/mapper/ directory, (e.g.
/dev/mapper/nvidia_eahaabcc1). Please see the 'dmraid' documentation
for more details.

ya comprobe el hd y uno de los resultados me dio esto:
=== START OF READ SMART DATA SECTION ===
SMART Error Log Version: 1
ATA Error Count: 6228 (device log contains only the most recent five errors)
CR = Command Register [HEX]
FR = Features Register [HEX]
SC = Sector Count Register [HEX]
SN = Sector Number Register [HEX]
CL = Cylinder Low Register [HEX]
CH = Cylinder High Register [HEX]
DH = Device/Head Register [HEX]
DC = Device Command Register [HEX]
ER = Error register [HEX]
ST = Status register [HEX]
Powered_Up_Time is measured from power on, and printed as
DDd+hh:mm:SS.sss where DD=days, hh=hours, mm=minutes,
SS=sec, and sss=millisec. It "wraps" after 49.710 days.

Error 6228 occurred at disk power-on lifetime: 6008 hours (250 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 02 60 e0 Error: UNC at LBA = 0x00600268 = 6292072

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 7f 01 60 e0 00 00:09:38.620 READ DMA
ec 00 00 00 00 00 a0 00 00:09:38.612 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:09:38.612 SET FEATURES [Set transfer mode]

Error 6227 occurred at disk power-on lifetime: 6008 hours (250 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 02 60 e0 Error: UNC at LBA = 0x00600268 = 6292072

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 7f 01 60 e0 00 00:09:36.042 READ DMA
ec 00 00 00 00 00 a0 00 00:09:36.034 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:09:36.034 SET FEATURES [Set transfer mode]

Error 6226 occurred at disk power-on lifetime: 6008 hours (250 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 02 60 e0 Error: UNC at LBA = 0x00600268 = 6292072

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 7f 01 60 e0 00 00:09:33.481 READ DMA
ec 00 00 00 00 00 a0 00 00:09:33.473 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:09:33.473 SET FEATURES [Set transfer mode]

Error 6225 occurred at disk power-on lifetime: 6008 hours (250 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 02 60 e0 Error: UNC at LBA = 0x00600268 = 6292072

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 7f 01 60 e0 00 00:09:30.915 READ DMA
ec 00 00 00 00 00 a0 00 00:09:30.907 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:09:30.907 SET FEATURES [Set transfer mode]

Error 6224 occurred at disk power-on lifetime: 6008 hours (250 days + 8 hours)
When the command that caused the error occurred, the device was active or idle.

After command completion occurred, registers were:
ER ST SC SN CL CH DH
-- -- -- -- -- -- --
40 51 00 68 02 60 e0 Error: UNC at LBA = 0x00600268 = 6292072

Commands leading to the command that caused the error were:
CR FR SC SN CL CH DH DC Powered_Up_Time Command/Feature_Name
-- -- -- -- -- -- -- -- ---------------- --------------------
c8 00 00 7f 01 60 e0 00 00:09:28.358 READ DMA
ec 00 00 00 00 00 a0 00 00:09:28.353 IDENTIFY DEVICE
ef 03 46 00 00 00 a0 00 00:09:28.353 SET FEATURES [Set transfer mode]

Imagen de Jose Luis 1320
+1
0
-1

¿Hiciste lo que te dice el mensaje principal y esa salida te dió?

 
NTFS is either inconsistent, or there is a hardware fault, or it's a
SoftRAID/FakeRAID hardware. In the first case run chkdsk /f on Windows
then reboot into Windows twice.
+1
0
-1

"Yo sólo se que no se nada"
-Sócrates, filósofo griego.
-Normas del foro

Imagen de legnaramso
+1
0
-1

hice lo que dice aca
http://claves-de-linux.blogspot.com.ar/2012/10/smartctl-checkear-disco-d...
Disculpa mi ignoracia.
y uno de los resultados que dio es el que pegue en el post.
lo de "En el largo primer caso chkdsk / f en Windows
luego reiniciar en Windows dos veces" porque desde windows nunca pude usar el disco, lo veo desde administracion pero no lo aparece en mi pc nunca pude usarlo desde windows.

+1
0
-1
Imagen de Jose Luis 1320
+1
0
-1

El mensaje dice esto:

NTFS es igualmente incosistente o hay alguna falla de hardware o es un hardware SoftRAID/FakeRAID. En el primer caso (la inconsistencia del disco NTFS) ejecute chkdsk /f en windows y reinicie 2 veces seguidas.

Entonces debes abrir windows y en windows debes abrir el "Simbólo del sistema" y dentro escribes:

chkdsk /f X:

En donde X lo reemplazas según la letra que encuentres en "Administración de discos" si es que la hay.
Si no te es posible hacerlo, entonces sigue las indicaciones de Gabriel.

+1
0
-1

"Yo sólo se que no se nada"
-Sócrates, filósofo griego.
-Normas del foro

Imagen de Gabriel_M
+1
0
-1

... MsWindows nunca funcionó ¿Para qué lo usas en sistema ntfs?
Mi sugerencia es:
Instala testdisk
Con su guia paso a paso
http://www.cgsecurity.org/wiki/TestDisk_Paso_A_Paso
Trata de recuperar la partición
Una vez logrado (testdisk practicamente hace milagros) pon a resguardo tus archivos
Desde gparted, elimina la partición, crea una en sistema ext4, crea luego en ella un directorio y dale permisos con chmod para poder escribir y leer en el, y reguarda tus archivos en ese directorio.
si el directorio fuera Archivos, y el disco se montara en /media/disco, en una terminal se ejecutaría

sudo su
mkdir /media/disco/Archivos
chmod -Rf 777 /media/disco/Archivos
+1
0
-1