No puedo grabar con ubuntu, de momento, alguien sabría decirme por qué

Imagen de goshote
0 puntos

Hola!

Tengo algún problema con mi sistema Ubuntu 7.04, para grabar cd o dvd.

Mi hardware es el siguiente:

Placa base:Asus A8N32-SLI DELUXE
Micro : AMD X2 -64bits-socket 939-4200
Grabadora de CD/DVD : LG- GSA-4160B ( Está conectada al IDE secundario como master)
Lectora de CD/DVD:LG - GDR8164B (conectado al IDE secundario cmo slave)
Discos duros: 2 unidades serial ATA seagate 160GB.

Sistema: Ubuntu Feisty Fawn 7.04-i386.
Nucleo:2.6.20-16-generic.
K3b:1.0

Les he puesto mis archivos del depurado de k3b, y mi archivo fstab, mi archivo hdparm.conf y el archivo /tmp/dmesg_casque_dvd.txt.

Si alguien necesita saber algo más para poder ayudarme, no dude en preguntar.

P.D.- Tengo una partición con windows XP pro y la grabación en este sistema funciona, tanto con nero premium v.7 y con alcohol 120.

Depurado de k3b:

System
-----------------------
K3b Version: 1.0

KDE Version: 3.5.6
QT Version: 3.3.7
Kernel: 2.6.20-16-generic
Devices
-----------------------
HL-DT-ST DVD-ROM GDR8164B 0L06 (/dev/hdd, ) [CD-ROM, DVD-ROM] [DVD-ROM, CD-ROM] [Ninguno]

HL-DT-ST DVDRAM GSA-4160B A302 (/dev/hdc, ) [CD-R, CD-RW, CD-ROM, DVD-ROM, DVD-R, DVD-RW, DVD+R, DVD+RW, DVD+R DL] [DVD-ROM, DVD-R secuencial, DVD-RAM, DVD-RW sobreescritura restringida, DVD-RW secuencial, DVD+RW, DVD+R, DVD+R doble capa, CD-ROM, CD-R, CD-RW] [SAO, TAO, En bruto, SAO/R96P, SAO/R96R, RAW/R16, RAW/R96P, RAW/R96R, Sobreescritura restringida]
Burned media
-----------------------
DVD-R secuencial

Used versions
-----------------------
growisofs: 7.0.1

growisofs
-----------------------
Executing 'builtin_dd if=/dev/fd/0 of=/dev/hdc obs=32k seek=0'
/dev/hdc: "Current Write Speed" is 4.1x1352KBps.
20185088/3912810496 ( 0.5%) @4.0x, remaining 19:17 RBU 100.0% UBU 2.9%
38666240/3912810496 ( 1.0%) @4.0x, remaining 15:01 RBU 100.0% UBU 100.0%
57147392/3912810496 ( 1.5%) @4.0x, remaining 14:37 RBU 100.0% UBU 100.0%
75628544/3912810496 ( 1.9%) @4.0x, remaining 13:31 RBU 100.0% UBU 100.0%
94109696/3912810496 ( 2.4%) @4.0x, remaining 12:50 RBU 100.0% UBU 100.0%
112623616/3912810496 ( 2.9%) @4.0x, remaining 12:56 RBU 100.0% UBU 100.0%
:-[ WRITE@LBA=e410h failed with SK=4h/ASC=08h/ACQ=03h]: Input/output error
:-( write failed: Input/output error
/dev/hdc: flushing cache
/dev/hdc: updating RMA
/dev/hdc: closing disc
:-[ CLOSE DISC failed with SK=5h/ASC=72h/ACQ=03h]: Input/output error

growisofs command:
-----------------------
/usr/bin/growisofs -Z /dev/hdc=/dev/fd/0 -use-the-force-luke=notray -use-the-force-luke=tty -use-the-force-luke=tracksize:1910552 -use-the-force-luke=dummy -dvd-compat -speed=4 -use-the-force-luke=bufsize:32m

 

archivo fstab

# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
proc /proc proc defaults 0 0
# /dev/sda2
UUID=a00036e8-5971-463a-89a0-78dff3b94bd2 / ext3 defaults,errors=remount-ro 0 1
# /dev/sda7
UUID=56bafe06-acd5-4e47-b304-8d49e825cf74 /home ext3 defaults 0 2
# /dev/sda1
# /dev/sda6
# /dev/sdb5
# /dev/sdb6
UUID=79734642-1375-468f-b97e-fb59859ab46b /media/sdb6 ext3 defaults 0 2
# /dev/sda5
UUID=4aaa4dea-0f26-4409-93af-7f0534504873 none swap sw 0 0
/dev/hdd /media/cdrom0 udf,iso9660 user,noauto 0 0
/dev/hdc /media/cdrom1 udf,iso9660 user,noauto 0 0
/dev/fd0 /media/floppy0 auto rw,user,noauto 0 0

# Generated by Automatix
/dev/sda1 /media/sda1 ntfs-3g defaults,locale=en_US.utf8 0 0
/dev/sda6 /media/sda6 ntfs-3g defaults,locale=en_US.utf8 0 0
/dev/sdb5 /media/sdb5 ntfs-3g defaults,locale=en_US.utf8 0 0
## End of Automatix mounted partitions

 

 

archivo hdparm.conf

 

## This is the default configuration for hdparm for Debian. It is a
## rather simple script, so please follow the following guidelines :)
## Any line that begins with a comment is ignored - add as many as you
## like. Note that an in-line comment is not supported. If a line
## consists of whitespace only (tabs, spaces, carriage return), it will be
## ignored, so you can space control fields as you like. ANYTHING ELSE
## IS PARSED!! This means that lines with stray characters or lines that
## use non # comment characters will be interpreted by the initscript.
## This has probably minor, but potentially serious, side effects for your
## hard drives, so please follow the guidelines. Patches to improve
## flexibilty welcome. Please read /usr/share/doc/hdparm/README.Debian for
## notes about known issues, especially if you have an MD array.
##
## Note that if the init script causes boot problems, you can pass 'nohdparm'
## on the kernel command line, and the script will not be run.
##
## Uncommenting the options below will cause them to be added to the DEFAULT
## string which is prepended to options listed in the blocks below.
##
## If an option is listed twice, the second instance replaces the first.
##
## /sbin/hdparm is not run unless a block of the form:
## DEV {
## option
## option
## ...
## }
## exists. This blocks will cause /sbin/hdparm OPTIONS DEV to be run.
## Where OPTIONS is the concatenation of all options previously defined
## outside of a block and all options defined with in the block.

# -q be quiet
quiet
# -a sector count for filesystem read-ahead
#read_ahead_sect = 12
# -A disable/enable the IDE drive's read-lookahead feature
#lookahead = on
# -b bus state
#bus = on
# -B apm setting
#apm = 255
# -c enable (E)IDE 32-bit I/O support - can be any of 0,1,3
#io32_support = 1
# -d disable/enable the "using_dma" flag for this drive
#dma = off
# -D enable/disable the on-drive defect management
#defect_mana = off
# -E cdrom speed
#cd_speed = 16
# -k disable/enable the "keep_settings_over_reset" flag for this drive
#keep_settings_over_reset = off
# -K disable/enable the drive's "keep_features_over_reset" flag
#keep_features_over_reset = on
# -m sector count for multiple sector I/O
#mult_sect_io = 32
# -P maximum sector count for the drive's internal prefetch mechanism
#prefetch_sect = 12
# -r read-only flag for device
#read_only = off
# -s Turn on/off power on in standby mode
#poweron_standby = off
# -S standby (spindown) timeout for the drive
#spindown_time = 24
# -u interrupt-unmask flag for the drive
#interrupt_unmask = on
# -W Disable/enable the IDE drive's write-caching feature
#write_cache = off
# -X IDE transfer mode for newer (E)IDE/ATA2 drives
#transfer_mode = 34
# -y force to immediately enter the standby mode
#standby
# -Y force to immediately enter the sleep mode
#sleep
# -Z Disable the power-saving function of certain Seagate drives
#disable_seagate
# -M Set the acoustic management properties of a drive
#acoustic_management
# -p Set the chipset PIO mode
# chipset_pio_mode
# --security-freeze Freeze the drive's security status
# security_freeze
# --security-unlock Unlock the drive's security
# security_unlock = PWD
# --security-set-pass Set security password
# security_pass = password
# --security-disable Disable drive locking
# security_disable
# --user-master Select password to use
# user-master = u
# --security-mode Set the security mode
# security_mode = h

# Root file systems. Please see README.Debian for details
# ROOTFS = /dev/hda

## New note - you can use straight hdparm commands in this config file
## as well - the set up is ugly, but it keeps backwards compatibility
## Additionally, it should be noted that any blocks that begin with
## the keyword 'command_line' are not run until after the root filesystem
## is mounted. This is done to avoid running blocks twice. If you need
## to run hdparm to set parameters for your root disk, please use the
## standard format.

#Samples follow:
#First three are good for devfs systems, fourth one for systems that do
#not use devfs. The fifth example uses straight hdparm command line
#syntax. Any of the blocks that use command line syntax must begin with
#the keyword 'command_line', and no attempt is made to validate syntax.
#It is provided for those more comfortable with hdparm syntax.

#/dev/discs/disc0/disc {
# mult_sect_io = 16
# write_cache = off
# spindown_time = 240
#}

#/dev/discs/disc1/disc {
# mult_sect_io = 32
# spindown_time = 36
# write_cache = off
#}

#/dev/cdroms/cdrom0 {
# dma = on
# interrupt_unmask = on
# io32_support = 0
#}

#/dev/hda {
# mult_sect_io = 16
# write_cache = off
# dma = on
#}

#command_line {
# hdparm -q -m16 -q -W0 -q -d1 /dev/hda
#}

 

archivo /tmp/dmesg_casque_dvd.txt

 

[ 0.000000] Linux version 2.6.20-16-generic (root@terranova) (gcc version 4.1.2 (Ubuntu 4.1.2-0ubuntu4)) #2 SMP Thu Jun 7 20:19:32 UTC 2007 (Ubuntu 2.6.20-16.29-generic)
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] sanitize start
[ 0.000000] sanitize end
[ 0.000000] copy_e820_map() start: 0000000000000000 size: 000000000009bc00 end: 000000000009bc00 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000000009bc00 size: 0000000000000400 end: 000000000009c000 type: 2
[ 0.000000] copy_e820_map() start: 00000000000e9b90 size: 0000000000016470 end: 0000000000100000 type: 2
[ 0.000000] copy_e820_map() start: 0000000000100000 size: 000000007feb0000 end: 000000007ffb0000 type: 1
[ 0.000000] copy_e820_map() type is E820_RAM
[ 0.000000] copy_e820_map() start: 000000007ffb0000 size: 000000000000e000 end: 000000007ffbe000 type: 3
[ 0.000000] copy_e820_map() start: 000000007ffbe000 size: 0000000000022000 end: 000000007ffe0000 type: 4
[ 0.000000] copy_e820_map() start: 000000007ffe0000 size: 0000000000020000 end: 0000000080000000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fec00000 size: 0000000000001000 end: 00000000fec01000 type: 2
[ 0.000000] copy_e820_map() start: 00000000fee00000 size: 0000000000100000 end: 00000000fef00000 type: 2
[ 0.000000] copy_e820_map() start: 00000000ff700000 size: 0000000000900000 end: 0000000100000000 type: 2
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009bc00 (usable)
[ 0.000000] BIOS-e820: 000000000009bc00 - 000000000009c000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e9b90 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 000000007ffb0000 (usable)
[ 0.000000] BIOS-e820: 000000007ffb0000 - 000000007ffbe000 (ACPI data)
[ 0.000000] BIOS-e820: 000000007ffbe000 - 000000007ffe0000 (ACPI NVS)
[ 0.000000] BIOS-e820: 000000007ffe0000 - 0000000080000000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved)
[ 0.000000] BIOS-e820: 00000000ff700000 - 0000000100000000 (reserved)
[ 0.000000] 1151MB HIGHMEM available.
[ 0.000000] 896MB LOWMEM available.
[ 0.000000] found SMP MP-table at 000ff780
[ 0.000000] Entering add_active_range(0, 0, 524208) 0 entries of 256 used
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0 -> 4096
[ 0.000000] Normal 4096 -> 229376
[ 0.000000] HighMem 229376 -> 524208
[ 0.000000] early_node_map[1] active PFN ranges
[ 0.000000] 0: 0 -> 524208
[ 0.000000] On node 0 totalpages: 524208
[ 0.000000] DMA zone: 32 pages used for memmap
[ 0.000000] DMA zone: 0 pages reserved
[ 0.000000] DMA zone: 4064 pages, LIFO batch:0
[ 0.000000] Normal zone: 1760 pages used for memmap
[ 0.000000] Normal zone: 223520 pages, LIFO batch:31
[ 0.000000] HighMem zone: 2303 pages used for memmap
[ 0.000000] HighMem zone: 292529 pages, LIFO batch:31
[ 0.000000] DMI 2.3 present.
[ 0.000000] ACPI: RSDP (v002 ACPIAM ) @ 0x000fb520
[ 0.000000] ACPI: XSDT (v001 A M I OEMXSDT 0x07000613 MSFT 0x00000097) @ 0x7ffb0100
[ 0.000000] ACPI: FADT (v003 A M I OEMFACP 0x07000613 MSFT 0x00000097) @ 0x7ffb0290
[ 0.000000] ACPI: MADT (v001 A M I OEMAPIC 0x07000613 MSFT 0x00000097) @ 0x7ffb0390
[ 0.000000] ACPI: MCFG (v001 A M I OEMMCFG 0x07000613 MSFT 0x00000097) @ 0x7ffb0400
[ 0.000000] ACPI: OEMB (v001 A M I AMI_OEM 0x07000613 MSFT 0x00000097) @ 0x7ffbe040
[ 0.000000] ACPI: DSDT (v001 A0371 A0371001 0x00000001 INTL 0x02002026) @ 0x00000000
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] Nvidia board detected. Ignoring ACPI timer override.
[ 0.000000] If you got timer trouble try acpi_use_timer_override
[ 0.000000] ACPI: PM-Timer IO Port: 0x508
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] Processor #0 15:3 APIC version 16
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] Processor #1 15:3 APIC version 16
[ 0.000000] ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 2, version 17, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored.
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge)
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] ACPI: IRQ14 used by override.
[ 0.000000] ACPI: IRQ15 used by override.
[ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] Allocating PCI resources starting at 88000000 (gap: 80000000:7ec00000)
[ 0.000000] Detected 2210.099 MHz processor.
[ 20.034579] Built 1 zonelists. Total pages: 520113
[ 20.034582] Kernel command line: root=UUID=a00036e8-5971-463a-89a0-78dff3b94bd2 ro quiet splash locale=es_ES
[ 20.034700] mapped APIC to ffffd000 (fee00000)
[ 20.034702] mapped IOAPIC to ffffc000 (fec00000)
[ 20.034704] Enabling fast FPU save and restore... done.
[ 20.034707] Enabling unmasked SIMD FPU exception support... done.
[ 20.034712] Initializing CPU#0
[ 20.034748] PID hash table entries: 4096 (order: 12, 16384 bytes)
[ 20.034798] spurious 8259A interrupt: IRQ7.
[ 20.035897] Console: colour VGA+ 80x25
[ 20.036177] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
[ 20.036500] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
[ 20.090084] Memory: 2067748k/2096832k available (1992k kernel code, 27724k reserved, 900k data, 328k init, 1179328k highmem)
[ 20.090093] virtual kernel memory layout:
[ 20.090094] fixmap : 0xfff4e000 - 0xfffff000 ( 708 kB)
[ 20.090095] pkmap : 0xff800000 - 0xffc00000 (4096 kB)
[ 20.090096] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB)
[ 20.090097] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB)
[ 20.090098] .init : 0xc03d9000 - 0xc042b000 ( 328 kB)
[ 20.090099] .data : 0xc02f2374 - 0xc03d36d4 ( 900 kB)
[ 20.090100] .text : 0xc0100000 - 0xc02f2374 (1992 kB)
[ 20.090103] Checking if this processor honours the WP bit even in supervisor mode... Ok.
[ 20.166665] Calibrating delay using timer specific routine.. 4423.08 BogoMIPS (lpj=8846164)
[ 20.166698] Security Framework v1.0.0 initialized
[ 20.166703] SELinux: Disabled at boot.
[ 20.166716] Mount-cache hash table entries: 512
[ 20.166820] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[ 20.166828] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.166830] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.166832] CPU 0(2) -> Core 0
[ 20.166834] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
[ 20.166842] Compat vDSO mapped to ffffe000.
[ 20.166845] Remapping vsyscall page to ffffe000
[ 20.166854] Checking 'hlt' instruction... OK.
[ 20.182755] SMP alternatives: switching to UP code
[ 20.183051] Early unpacking initramfs... done
[ 20.436707] ACPI: Core revision 20060707
[ 20.437133] ACPI: Looking for DSDT in initramfs... file /DSDT.aml not found, using machine DSDT.
[ 20.439603] CPU0: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 20.439621] SMP alternatives: switching to SMP code
[ 20.439710] Booting processor 1/1 eip 3000
[ 20.450101] Initializing CPU#1
[ 20.530643] Calibrating delay using timer specific routine.. 4420.42 BogoMIPS (lpj=8840855)
[ 20.530649] CPU: After generic identify, caps: 178bfbff e3d3fbff 00000000 00000000 00000001 00000000 00000003
[ 20.530655] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
[ 20.530657] CPU: L2 Cache: 512K (64 bytes/line)
[ 20.530659] CPU 1(2) -> Core 1
[ 20.530660] CPU: After all inits, caps: 178bfbff e3d3fbff 00000000 00000410 00000001 00000000 00000003
[ 20.530595] CPU1: AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ stepping 02
[ 20.530607] Total of 2 processors activated (8843.50 BogoMIPS).
[ 20.530777] ENABLING IO-APIC IRQs
[ 20.530969] ..TIMER: vector=0x31 apic1=0 pin1=0 apic2=-1 pin2=-1
[ 20.678327] checking TSC synchronization across 2 CPUs:
[ 0.000001] CPU#0 had -111 usecs TSC skew, fixed it up.
[ 0.000003] CPU#1 had 111 usecs TSC skew, fixed it up.
[ 0.003997] Brought up 2 CPUs
[ 0.070188] migration_cost=207
[ 0.070394] Booting paravirtualized kernel on bare hardware
[ 0.070446] Time: 19:30:47 Date: 05/13/107
[ 0.070471] NET: Registered protocol family 16
[ 0.070538] EISA bus registered
[ 0.070541] ACPI: bus type pci registered
[ 0.071201] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=6
[ 0.071203] PCI: Using configuration type 1
[ 0.071204] Setting up standard PCI resources
[ 0.081107] ACPI: Interpreter enabled
[ 0.081109] ACPI: Using IOAPIC for interrupt routing
[ 0.081612] ACPI: PCI Root Bridge [PCI0] (0000:00)
[ 0.081617] PCI: Probing PCI hardware (bus 00)
[ 0.082522] Boot video device is 0000:03:00.0
[ 0.082630] PCI: Transparent bridge - 0000:00:12.0
[ 0.082771] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.102638] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PB2P._PRT]
[ 0.103084] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE0._PRT]
[ 0.103331] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE1._PRT]
[ 0.103578] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE2._PRT]
[ 0.103823] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE3._PRT]
[ 0.104134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCE4._PRT]
[ 0.105210] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *10
[ 0.105569] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *10
[ 0.105927] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *0, disabled.
[ 0.106286] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled.
[ 0.106644] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *10
[ 0.107001] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *10
[ 0.107358] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled.
[ 0.107714] ACPI: PCI Interrupt Link [LACI] (IRQs 20 21 22 23) *10
[ 0.108074] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled.
[ 0.108431] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *10
[ 0.108787] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11
[ 0.109150] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *11
[ 0.109577] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled.
[ 0.109665] Linux Plug and Play Support v0.97 (c) Adam Belay
[ 0.109679] pnp: PnP ACPI init
[ 0.117149] pnp: PnP ACPI: found 16 devices
[ 0.117153] PnPBIOS: Disabled by ACPI PNP
[ 0.117192] PCI: Using ACPI for IRQ routing
[ 0.117195] PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report
[ 0.130559] NET: Registered protocol family 8
[ 0.130561] NET: Registered protocol family 20
[ 0.131662] pnp: 00:0d: ioport range 0xc00-0xc0f has been reserved
[ 0.131664] pnp: 00:0d: ioport range 0xd00-0xd0f has been reserved
[ 0.131666] pnp: 00:0d: ioport range 0xa20-0xa2f has been reserved
[ 0.131668] pnp: 00:0d: ioport range 0xa30-0xa3f has been reserved
[ 0.131881] PCI: Bridge: 0000:00:02.0
[ 0.131883] IO window: c000-cfff
[ 0.131886] MEM window: dce00000-dcefffff
[ 0.131888] PREFETCH window: disabled.
[ 0.131890] PCI: Bridge: 0000:00:03.0
[ 0.131892] IO window: d000-dfff
[ 0.131894] MEM window: dcf00000-dcffffff
[ 0.131896] PREFETCH window: disabled.
[ 0.131898] PCI: Bridge: 0000:00:04.0
[ 0.131901] IO window: e000-efff
[ 0.131903] MEM window: dd000000-dfefffff
[ 0.131908] PREFETCH window: c0000000-cfffffff
[ 0.131910] PCI: Bridge: 0000:00:12.0
[ 0.131911] IO window: disabled.
[ 0.131914] MEM window: dff00000-dfffffff
[ 0.131916] PREFETCH window: disabled.
[ 0.131918] PCI: Bridge: 0000:00:16.0
[ 0.131919] IO window: disabled.
[ 0.131922] MEM window: disabled.
[ 0.131923] PREFETCH window: disabled.
[ 0.131926] PCI: Bridge: 0000:00:17.0
[ 0.131927] IO window: disabled.
[ 0.131929] MEM window: disabled.
[ 0.131931] PREFETCH window: disabled.
[ 0.131942] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 0.131947] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 0.131953] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 0.131957] PCI: Setting latency timer of device 0000:00:12.0 to 64
[ 0.131963] PCI: Setting latency timer of device 0000:00:16.0 to 64
[ 0.131969] PCI: Setting latency timer of device 0000:00:17.0 to 64
[ 0.131996] NET: Registered protocol family 2
[ 0.171931] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.172062] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.172703] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
[ 0.173026] TCP: Hash tables configured (established 131072 bind 65536)
[ 0.173028] TCP reno registered
[ 0.187973] checking if image is initramfs... it is
[ 0.686833] Freeing initrd memory: 6786k freed
[ 1.228000] audit: initializing netlink socket (disabled)
[ 1.228000] audit(1181763047.412:1): initialized
[ 1.228000] highmem bounce pool size: 64 pages
[ 1.228000] VFS: Disk quotas dquot_6.5.1
[ 1.228000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 1.228000] io scheduler noop registered
[ 1.228000] io scheduler anticipatory registered
[ 1.228000] io scheduler deadline registered
[ 1.228000] io scheduler cfq registered (default)
[ 1.248000] PCI: Found disabled HT MSI Mapping on 0000:00:16.0
[ 1.248000] PCI: Found disabled HT MSI Mapping on 0000:00:00.0
[ 1.248000] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:16.0.
[ 1.248000] PCI: Found disabled HT MSI Mapping on 0000:00:17.0
[ 1.248000] PCI: Found disabled HT MSI Mapping on 0000:00:00.0
[ 1.248000] PCI: MSI quirk detected. MSI disabled on chipset 0000:00:17.0.
[ 1.248000] PCI: Setting latency timer of device 0000:00:02.0 to 64
[ 1.248000] assign_interrupt_mode Found MSI capability
[ 1.248000] Allocate Port Service[0000:00:02.0:pcie00]
[ 1.248000] PCI: Setting latency timer of device 0000:00:03.0 to 64
[ 1.248000] assign_interrupt_mode Found MSI capability
[ 1.248000] Allocate Port Service[0000:00:03.0:pcie00]
[ 1.248000] PCI: Setting latency timer of device 0000:00:04.0 to 64
[ 1.248000] assign_interrupt_mode Found MSI capability
[ 1.248000] Allocate Port Service[0000:00:04.0:pcie00]
[ 1.248000] PCI: Setting latency timer of device 0000:00:16.0 to 64
[ 1.248000] assign_interrupt_mode Found MSI capability
[ 1.248000] Allocate Port Service[0000:00:16.0:pcie00]
[ 1.248000] PCI: Setting latency timer of device 0000:00:17.0 to 64
[ 1.248000] assign_interrupt_mode Found MSI capability
[ 1.248000] Allocate Port Service[0000:00:17.0:pcie00]
[ 1.248000] isapnp: Scanning for PnP cards...
[ 1.600000] isapnp: No Plug & Play device found
[ 1.620000] Real Time Clock Driver v1.12ac
[ 1.620000] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1.620000] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.620000] 00:0c: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[ 1.620000] mice: PS/2 mouse device common for all mice
[ 1.620000] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1.620000] input: Macintosh mouse button emulation as /class/input/input0
[ 1.620000] Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
[ 1.620000] ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
[ 1.620000] PNP: PS/2 Controller [PNP0303:PS2K] at 0x60,0x64 irq 1
[ 1.620000] PNP: PS/2 controller doesn't have AUX irq; using default 12
[ 1.624000] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.624000] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.624000] EISA: Probing bus 0 at eisa.0
[ 1.624000] EISA: Detected 0 cards.
[ 1.652000] TCP cubic registered
[ 1.652000] NET: Registered protocol family 1
[ 1.652000] Starting balanced_irq
[ 1.652000] Using IPI No-Shortcut mode
[ 1.652000] ACPI: (supports S0 S1 S3 S4 S5)
[ 1.652000] Magic number: 11:469:546
[ 1.652000] hash matches device null
[ 1.652000] Freeing unused kernel memory: 328k freed
[ 1.656000] Time: acpi_pm clocksource has been installed.
[ 1.656000] input: AT Translated Set 2 keyboard as /class/input/input1
[ 2.852000] Capability LSM initialized
[ 2.888000] ACPI: Processor [CPU1] (supports 8 throttling states)
[ 3.292000] SCSI subsystem initialized
[ 3.316000] libata version 2.20 loaded.
[ 3.352000] sata_nv 0000:00:10.0: version 3.3
[ 3.352000] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23
[ 3.352000] ACPI: PCI Interrupt 0000:00:10.0[A] -> Link [LSA0] -> GSI 23 (level, low) -> IRQ 16
[ 3.352000] sata_nv 0000:00:10.0: Using ADMA mode
[ 3.352000] PCI: Setting latency timer of device 0000:00:10.0 to 64
[ 3.352000] ata1: SATA max UDMA/133 cmd 0xf884a480 ctl 0xf884a4a0 bmdma 0x0001a400 irq 16
[ 3.352000] ata2: SATA max UDMA/133 cmd 0xf884a580 ctl 0xf884a5a0 bmdma 0x0001a408 irq 16
[ 3.352000] scsi0 : sata_nv
[ 3.356000] usbcore: registered new interface driver usbfs
[ 3.356000] usbcore: registered new interface driver hub
[ 3.356000] usbcore: registered new device driver usb
[ 3.356000] ohci_hcd: 2006 August 04 USB 1.1 'Open' Host Controller (OHCI) Driver
[ 3.380000] Floppy drive(s): fd0 is 1.44M
[ 3.412000] FDC 0 is a post-1991 82077
[ 3.412000] ieee1394: Initialized config rom entry `ip1394'
[ 3.824000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 3.884000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 3.884000] ata1.00: ATA-7: ST3160212AS, 3.AAE, max UDMA/133
[ 3.884000] ata1.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 3.948000] ata1.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 3.948000] ata1.00: configured for UDMA/133
[ 3.948000] scsi1 : sata_nv
[ 4.420000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 4.464000] ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 4.464000] ata2.00: ATA-7: ST3160212AS, 3.AAE, max UDMA/133
[ 4.464000] ata2.00: 312581808 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 4.532000] ata2.00: ata_hpa_resize 1: sectors = 312581808, hpa_sectors = 312581808
[ 4.532000] ata2.00: configured for UDMA/133
[ 4.532000] scsi 0:0:0:0: Direct-Access ATA ST3160212AS 3.AA PQ: 0 ANSI: 5
[ 4.532000] ata1: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 4.532000] scsi 1:0:0:0: Direct-Access ATA ST3160212AS 3.AA PQ: 0 ANSI: 5
[ 4.532000] ata2: bounce limit 0xFFFFFFFFFFFFFFFF, segment boundary 0xFFFFFFFF, hw segs 61
[ 4.532000] ACPI: PCI Interrupt Link [LSA1] enabled at IRQ 22
[ 4.532000] ACPI: PCI Interrupt 0000:00:11.0[A] -> Link [LSA1] -> GSI 22 (level, low) -> IRQ 17
[ 4.532000] sata_nv 0000:00:11.0: Using ADMA mode
[ 4.532000] PCI: Setting latency timer of device 0000:00:11.0 to 64
[ 4.532000] ata3: SATA max UDMA/133 cmd 0xf8854480 ctl 0xf88544a0 bmdma 0x00019800 irq 17
[ 4.532000] ata4: SATA max UDMA/133 cmd 0xf8854580 ctl 0xf88545a0 bmdma 0x00019808 irq 17
[ 4.532000] scsi2 : sata_nv
[ 4.844000] ata3: SATA link down (SStatus 0 SControl 300)
[ 4.844000] scsi3 : sata_nv
[ 5.160000] ata4: SATA link down (SStatus 0 SControl 300)
[ 5.164000] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21
[ 5.164000] ACPI: PCI Interrupt 0000:00:0b.0[A] -> Link [LUB0] -> GSI 21 (level, low) -> IRQ 18
[ 5.164000] PCI: Setting latency timer of device 0000:00:0b.0 to 64
[ 5.164000] ohci_hcd 0000:00:0b.0: OHCI Host Controller
[ 5.164000] ohci_hcd 0000:00:0b.0: new USB bus registered, assigned bus number 1
[ 5.164000] ohci_hcd 0000:00:0b.0: irq 18, io mem 0xdcdfe000
[ 5.224000] usb usb1: configuration #1 chosen from 1 choice
[ 5.224000] hub 1-0:1.0: USB hub found
[ 5.224000] hub 1-0:1.0: 10 ports detected
[ 5.332000] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 20
[ 5.332000] ACPI: PCI Interrupt 0000:00:0b.1[B] -> Link [LUB2] -> GSI 20 (level, low) -> IRQ 19
[ 5.332000] PCI: Setting latency timer of device 0000:00:0b.1 to 64
[ 5.332000] ehci_hcd 0000:00:0b.1: EHCI Host Controller
[ 5.332000] ehci_hcd 0000:00:0b.1: new USB bus registered, assigned bus number 2
[ 5.332000] ehci_hcd 0000:00:0b.1: debug port 1
[ 5.332000] PCI: cache line size of 64 is not supported by device 0000:00:0b.1
[ 5.332000] ehci_hcd 0000:00:0b.1: irq 19, io mem 0xdcdffc00
[ 5.332000] ehci_hcd 0000:00:0b.1: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[ 5.332000] usb usb2: configuration #1 chosen from 1 choice
[ 5.332000] hub 2-0:1.0: USB hub found
[ 5.332000] hub 2-0:1.0: 10 ports detected
[ 5.440000] sata_sil24 0000:01:00.0: version 0.8
[ 5.440000] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 19
[ 5.440000] ACPI: PCI Interrupt 0000:01:00.0[A] -> Link [LNKB] -> GSI 19 (level, low) -> IRQ 20
[ 5.440000] PCI: Setting latency timer of device 0000:01:00.0 to 64
[ 5.440000] ata5: SATA max UDMA/100 cmd 0xf8910000 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.440000] ata6: SATA max UDMA/100 cmd 0xf8912000 ctl 0x00000000 bmdma 0x00000000 irq 20
[ 5.440000] scsi4 : sata_sil24
[ 5.752000] ata5: SATA link down (SStatus 0 SControl 300)
[ 5.752000] scsi5 : sata_sil24
[ 6.068000] ata6: SATA link down (SStatus 0 SControl 300)
[ 6.072000] ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 18
[ 6.072000] ACPI: PCI Interrupt 0000:04:0b.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 21
[ 6.124000] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[dffff800-dfffffff] Max Packet=[2048] IR/IT contexts=[4/8]
[ 6.124000] NFORCE-CK804: IDE controller at PCI slot 0000:00:0f.0
[ 6.124000] NFORCE-CK804: chipset revision 243
[ 6.124000] NFORCE-CK804: not 100% native mode: will probe irqs later
[ 6.124000] NFORCE-CK804: 0000:00:0f.0 (rev f3) UDMA133 controller
[ 6.124000] ide0: BM-DMA at 0xffa0-0xffa7, BIOS settings: hda:pio, hdb:pio
[ 6.124000] ide1: BM-DMA at 0xffa8-0xffaf, BIOS settings: hdc:DMA, hdd:DMA
[ 6.124000] Probing IDE interface ide0...
[ 6.136000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 6.136000] sda: Write Protect is off
[ 6.136000] sda: Mode Sense: 00 3a 00 00
[ 6.136000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.136000] SCSI device sda: 312581808 512-byte hdwr sectors (160042 MB)
[ 6.136000] sda: Write Protect is off
[ 6.136000] sda: Mode Sense: 00 3a 00 00
[ 6.136000] SCSI device sda: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.136000] sda: sda1 sda2 sda3 < sda5 sda6 sda7 >
[ 6.200000] sd 0:0:0:0: Attached scsi disk sda
[ 6.200000] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[ 6.200000] sdb: Write Protect is off
[ 6.200000] sdb: Mode Sense: 00 3a 00 00
[ 6.200000] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.200000] SCSI device sdb: 312581808 512-byte hdwr sectors (160042 MB)
[ 6.200000] sdb: Write Protect is off
[ 6.200000] sdb: Mode Sense: 00 3a 00 00
[ 6.200000] SCSI device sdb: write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 6.200000] sdb: sdb1 < sdb5 sdb6 >
[ 6.232000] sd 1:0:0:0: Attached scsi disk sdb
[ 6.236000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[ 6.236000] sd 1:0:0:0: Attached scsi generic sg1 type 0
[ 6.280000] usb 1-2: new low speed USB device using ohci_hcd and address 2
[ 6.488000] usb 1-2: configuration #1 chosen from 1 choice
[ 6.596000] Attempting manual resume
[ 6.596000] swsusp: Resume From Partition 8:5
[ 6.596000] PM: Checking swsusp image.
[ 6.596000] PM: Resume from disk failed.
[ 6.616000] kjournald starting. Commit interval 5 seconds
[ 6.616000] EXT3-fs: mounted filesystem with ordered data mode.
[ 6.692000] Probing IDE interface ide1...
[ 6.796000] usb 1-4: new full speed USB device using ohci_hcd and address 3
[ 7.016000] usb 1-4: configuration #1 chosen from 1 choice
[ 7.016000] usbcore: registered new interface driver hiddev
[ 7.024000] input: Logitech USB-PS/2 Optical Mouse as /class/input/input2
[ 7.024000] input: USB HID v1.10 Mouse [Logitech USB-PS/2 Optical Mouse] on usb-0000:00:0b.0-2
[ 7.024000] usbcore: registered new interface driver usbhid
[ 7.024000] drivers/usb/input/hid-core.c: v2.6:USB HID core driver
[ 7.404000] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0011d80000c4ee6c]
[ 7.436000] hdc: HL-DT-ST DVDRAM GSA-4160B, ATAPI CD/DVD-ROM drive
[ 8.224000] hdd: HL-DT-STDVD-ROM GDR8164B, ATAPI CD/DVD-ROM drive
[ 8.284000] ide1 at 0x170-0x177,0x376 on irq 15
[ 15.416000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 15.456000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[ 15.484000] i2c_adapter i2c-0: nForce2 SMBus adapter at 0x600
[ 15.484000] i2c_adapter i2c-1: nForce2 SMBus adapter at 0x700
[ 15.680000] input: PC Speaker as /class/input/input3
[ 15.704000] parport: PnPBIOS parport detected.
[ 15.704000] parport0: PC-style at 0x378 (0x778), irq 7, dma 3 [PCSPP,TRISTATE,COMPAT,ECP,DMA]
[ 15.800000] ACPI: PCI Interrupt 0000:02:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 21
[ 15.800000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[ 15.800000] sky2 0000:02:00.0: v1.13 addr 0xdcffc000 irq 21 Yukon-EC (0xb6) rev 2
[ 15.800000] sky2 eth0: addr 00:17:31:fa:56:27
[ 15.844000] Linux agpgart interface v0.102 (c) Dave Jones
[ 15.852000] sky2 eth0: enabling interface
[ 15.856000] sky2 eth0: ram buffer 48K
[ 15.896000] drivers/usb/class/usblp.c: usblp0: USB Bidirectional printer dev 3 if 0 alt 0 proto 2 vid 0x03F0 pid 0xC302
[ 15.896000] usbcore: registered new interface driver usblp
[ 15.896000] drivers/usb/class/usblp.c: v0.13: USB Printer Device Class driver
[ 15.952000] hdc: ATAPI 40X DVD-ROM DVD-R-RAM CD-R/RW drive, 2048kB Cache, UDMA(66)
[ 15.952000] Uniform CD-ROM driver Revision: 3.20
[ 15.968000] hdd: ATAPI 52X DVD-ROM drive, 256kB Cache, UDMA(33)
[ 15.976000] nvidia: module license 'NVIDIA' taints kernel.
[ 16.236000] ACPI: PCI Interrupt 0000:03:00.0[A] -> Link [LNKA] -> GSI 18 (level, low) -> IRQ 21
[ 16.236000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[ 16.236000] NVRM: loading NVIDIA UNIX x86 Kernel Module 1.0-9755 Mon Feb 26 23:21:15 PST 2007
[ 16.320000] ACPI: PCI Interrupt Link [LACI] enabled at IRQ 23
[ 16.320000] ACPI: PCI Interrupt 0000:00:0d.0[A] -> Link [LACI] -> GSI 23 (level, low) -> IRQ 16
[ 16.320000] PCI: Setting latency timer of device 0000:00:0d.0 to 64
[ 16.640000] intel8x0_measure_ac97_clock: measured 58750 usecs
[ 16.640000] intel8x0: clocking to 47000
[ 16.816000] fuse init (API version 7.8)
[ 16.848000] lp0: using parport0 (interrupt-driven).
[ 16.888000] Adding 1028120k swap on /dev/disk/by-uuid/4aaa4dea-0f26-4409-93af-7f0534504873. Priority:-1 extents:1 across:1028120k
[ 17.020000] EXT3 FS on sda2, internal journal
[ 17.076000] NET: Registered protocol family 17
[ 17.288000] kjournald starting. Commit interval 5 seconds
[ 17.288000] EXT3 FS on sda7, internal journal
[ 17.288000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.308000] kjournald starting. Commit interval 5 seconds
[ 17.308000] EXT3 FS on sdb6, internal journal
[ 17.308000] EXT3-fs: mounted filesystem with ordered data mode.
[ 17.540000] sky2 eth0: Link is up at 100 Mbps, full duplex, flow control both
[ 20.576000] NET: Registered protocol family 10
[ 20.576000] lo: Disabled Privacy Extensions
[ 23.872000] ibm_acpi: ec object not found
[ 23.952000] input: Power Button (FF) as /class/input/input4
[ 23.952000] ACPI: Power Button (FF) [PWRF]
[ 23.952000] input: Power Button (CM) as /class/input/input5
[ 23.952000] ACPI: Power Button (CM) [PWRB]
[ 23.988000] Using specific hotkey driver
[ 24.028000] No dock devices found.
[ 24.068000] pcc_acpi: loading...
[ 24.220000] powernow-k8: Found 2 AMD Athlon(tm) 64 X2 Dual Core Processor 4200+ processors (version 2.00.00)
[ 24.220000] powernow-k8: MP systems not supported by PSB BIOS structure
[ 24.220000] powernow-k8: MP systems not supported by PSB BIOS structure
[ 28.160000] ppdev: user-space parallel port driver
[ 29.116000] apm: BIOS version 1.2 Flags 0x03 (Driver version 1.16ac)
[ 29.116000] apm: disabled - APM is not SMP safe.
[ 29.260000] Installing knfsd (copyright (C) 1996 okir@monad.swb.de).
[ 29.352000] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
[ 29.356000] NFSD: starting 90-second grace period
[ 30.320000] vboxdrv: Trying to deactivate NMI watchdog permanently...
[ 30.320000] vboxdrv: Successfully done.
[ 31.356000] Bluetooth: Core ver 2.11
[ 31.356000] NET: Registered protocol family 31
[ 31.356000] Bluetooth: HCI device and connection manager initialized
[ 31.356000] Bluetooth: HCI socket layer initialized
[ 31.392000] Bluetooth: L2CAP ver 2.8
[ 31.392000] Bluetooth: L2CAP socket layer initialized
[ 31.416000] Bluetooth: RFCOMM socket layer initialized
[ 31.416000] Bluetooth: RFCOMM TTY layer initialized
[ 31.416000] Bluetooth: RFCOMM ver 1.8
[ 40.284000] eth0: no IPv6 routers present
[ 127.376000] usb 2-1: new high speed USB device using ehci_hcd and address 4
[ 127.508000] usb 2-1: configuration #1 chosen from 1 choice
[ 127.560000] usbcore: registered new interface driver libusual
[ 127.564000] Initializing USB Mass Storage driver...
[ 127.564000] scsi6 : SCSI emulation for USB Mass Storage devices
[ 127.564000] usb-storage: device found at 4
[ 127.564000] usbcore: registered new interface driver usb-storage
[ 127.564000] USB Mass Storage support registered.
[ 127.564000] usb-storage: waiting for device to settle before scanning
[ 132.564000] usb-storage: device scan complete
[ 132.568000] scsi 6:0:0:0: Direct-Access SEAGATE ST380011A 8.01 PQ: 0 ANSI: 2
[ 132.568000] SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
[ 132.572000] sdc: Write Protect is off
[ 132.572000] sdc: Mode Sense: 53 00 00 08
[ 132.572000] sdc: assuming drive cache: write through
[ 132.572000] SCSI device sdc: 156301488 512-byte hdwr sectors (80026 MB)
[ 132.576000] sdc: Write Protect is off
[ 132.576000] sdc: Mode Sense: 53 00 00 08
[ 132.576000] sdc: assuming drive cache: write through
[ 132.576000] sdc: sdc2 < sdc5 >
[ 132.608000] sd 6:0:0:0: Attached scsi disk sdc
[ 132.608000] sd 6:0:0:0: Attached scsi generic sg2 type 0
[ 151.100000] kjournald starting. Commit interval 5 seconds
[ 151.100000] EXT3-fs warning: maximal mount count reached, running e2fsck is recommended
[ 151.132000] EXT3 FS on sdc5, internal journal
[ 151.132000] EXT3-fs: recovery complete.
[ 151.132000] EXT3-fs: mounted filesystem with ordered data mode.
[ 171.992000] usb 2-1: USB disconnect, address 4
[ 268.260000] cdrom: This disc doesn't have any tracks I recognize!
[ 1247.872000] cdrom: This disc doesn't have any tracks I recognize!

 

 

Saludos y Muchas gracias

 

altay.lainus@gmail.com

 

 

Imagen de Festor
+1
0
-1

 ¿Has modficado el archivo hdparm.conf ?

*******************

Primero te ignoran.

Luego se ríen de ti.

Después te atacan.

Entonces ganas

Mohandas Gandhi

*******************

+1
0
-1
Imagen de goshote
+1
0
-1

 

 No, no lo he modificado, ¿lo debería modificar, si es así que parte del archivo tengo que cambiar?, lo puedes mirar en el post anterior, a ver si ves algo raro, también está el archivo fstab, y el 

 dmesg_casque_dvd.txt.

Gracias

Saludos 

 

goshoteee@gmail.com

+1
0
-1