Problemas con copiadora DVD HL-DT-STDVD-RAM GSA-H22N

Imagen de LZCrack
0 puntos

Hola amigos ubuntures

Desde hace un tiempo, no he podido copiar nada en mi copiadora dvd semi nueva, jeje

he buscado en foros, de un lado a otro, sin poder hacer nada.

k3b me pide dma, y desde ahi todo salio peor

dejo lo que me sale en consola

 

yo:~$ sudo hdparm -iTt /dev/hdc

/dev/hdc:

Model=HL-DT-STDVD-RAM GSA-H22N, FwRev=1.02, SerialNo=
Config={ Fixed Removeable DTR<=5Mbs DTR>10Mbs nonMagnetic }
RawCHS=0/0/0, TrkSize=0, SectSize=0, ECCbytes=0
BuffType=unknown, BuffSize=0kB, MaxMultSect=0
(maybe): CurCHS=0/0/0, CurSects=0, LBA=yes, LBAsects=0
IORDY=on/off, tPIO={min:120,w/IORDY:120}, tDMA={min:120,rec:120}
PIO modes: pio0 pio1 pio2 pio3 pio4
DMA modes: sdma0 sdma1 sdma2 mdma0 mdma1 mdma2
UDMA modes: udma0 udma1 udma2 udma3 *udma4 udma3 *udma4
AdvancedPM=no
Drive conforms to: Unspecified: ATA/ATAPI-2 ATA/ATAPI-3 ATA/ATAPI-4 ATA/ATAPI-5

* signifies the current active mode

read() failed: Input/output error
Timing buffered disk reads: read() failed: Input/output error
BLKFLSBUF failed: Function not implemented

yo: ~$ sudo hdparm /dev/hdc

/dev/hdc:
IO_support = 1 (32-bit)
unmaskirq = 1 (on)
using_dma = 1 (on)
keepsettings = 0 (off)
readonly = 0 (off)
readahead = 256 (on)
HDIO_GETGEO failed: Inappropriate ioctl for device

no se q otra info poner, Por favor, se agradece cualquier ayuda

Saludos.

 

 

Imagen de LZCrack
+1
0
-1

hola

¿no se entendio mi pregunta?

lo importante aqui es que no puedo usar mi copiador dvd, y he tenido que instalar windows en otro disco para poder copiar.

por favor, ayuda

 

+1
0
-1
Imagen de rpgmaker
+1
0
-1

Explícate mejor. Cual es la marca de tu lectora/grabadora DVD?

+1
0
-1
Imagen de LZCrack
+1
0
-1

hola, mi copiadora es una LG, mas arriba aparece el modelo exacto

saludos y gracias 

+1
0
-1
Imagen de dracool
+1
0
-1

***********************************
Te muevo al Foro Correspondiente
Movido por dracool.
***********************************


Equipo de moderadores del foro
+1
0
-1
Imagen de LZCrack
+1
0
-1

gracias dracol, no me había percatado que estaba en el foro equivocado

 

+1
0
-1
Imagen de rpgmaker
+1
0
-1

Oh, no me fije. La mia es ese mismo modelo y funciona bien en ubuntu y cualquier otra distro. Revisa si el DVD que estas intentando grabar esta malo que puede ser una razon.

+1
0
-1
Imagen de LZCrack
+1
0
-1

nop, el dvd esta bueno, por que lo he usado en windows.

Antes tambien me funcionaba, k3b me pedia que activara dma, pero no me funcionaba, como mostre mas arriba.

¿tu lo tienes activado?, si es asi, dime que pusiste en el /etc/hdparm.conf ?

ahora lo tengo sin dma y aun asi al poner sudo hdparm /dev/hdc me sale

/dev/hdc:
 IO_support   =  1 (32-bit)
 unmaskirq    =  1 (on)
 using_dma    =  0 (off)
 keepsettings =  0 (off)
 readonly     =  0 (off)
 readahead    = 256 (on)
 HDIO_GETGEO failed: Inappropriate ioctl for device
 

 

+1
0
-1
Imagen de rpgmaker
+1
0
-1

Lo tengo encendido, aquí te lo pasteo, revisa lo que quieras:

# -q be quiet
quiet
# -a sector count for filesystem read-ahead
#read_ahead_sect = 12
# -A disable/enable the IDE drive's read-lookahead feature
#lookahead = on
# -b bus state
#bus = on
# -B apm setting
#apm = 255
# -c enable (E)IDE 32-bit I/O support - can be any of 0,1,3
#io32_support = 1
# -d disable/enable the "using_dma" flag for this drive
#dma = off
# -D enable/disable the on-drive defect management
#defect_mana = off
# -E cdrom speed
#cd_speed = 16
# -k disable/enable the "keep_settings_over_reset" flag for this drive
#keep_settings_over_reset = off
# -K disable/enable the drive's "keep_features_over_reset" flag
#keep_features_over_reset = on
# -m sector count for multiple sector I/O
#mult_sect_io = 32
# -P maximum sector count for the drive's internal prefetch mechanism
#prefetch_sect = 12
# -r read-only flag for device
#read_only = off
# -s Turn on/off power on in standby mode
#poweron_standby = off
# -S standby (spindown) timeout for the drive
#spindown_time = 24
# -u interrupt-unmask flag for the drive
#interrupt_unmask = on
# -W Disable/enable the IDE drive's write-caching feature
#write_cache = off
# -X IDE transfer mode for newer (E)IDE/ATA2 drives
#transfer_mode = 34
# -y force to immediately enter the standby mode
#standby
# -Y force to immediately enter the sleep mode
#sleep
# -Z Disable the power-saving function of certain Seagate drives
#disable_seagate
# -M Set the acoustic management properties of a drive
#acoustic_management
# -p Set the chipset PIO mode
# chipset_pio_mode
# --security-freeze Freeze the drive's security status
# security_freeze
# --security-unlock Unlock the drive's security
# security_unlock = PWD
# --security-set-pass Set security password
# security_pass = password
# --security-disable Disable drive locking
# security_disable
# --user-master Select password to use
# user-master = u
# --security-mode Set the security mode
# security_mode = h

# Root file systems. Please see README.Debian for details
# ROOTFS = /dev/hda

## New note - you can use straight hdparm commands in this config file
## as well - the set up is ugly, but it keeps backwards compatibility
## Additionally, it should be noted that any blocks that begin with
## the keyword 'command_line' are not run until after the root filesystem
## is mounted. This is done to avoid running blocks twice. If you need
## to run hdparm to set parameters for your root disk, please use the
## standard format.

#Samples follow:
#First three are good for devfs systems, fourth one for systems that do
#not use devfs. The fifth example uses straight hdparm command line
#syntax. Any of the blocks that use command line syntax must begin with
#the keyword 'command_line', and no attempt is made to validate syntax.
#It is provided for those more comfortable with hdparm syntax.

#/dev/discs/disc0/disc {
# mult_sect_io = 16
# write_cache = off
# spindown_time = 240
#}

#/dev/discs/disc1/disc {
# mult_sect_io = 32
# spindown_time = 36
# write_cache = off
#}

#/dev/cdroms/cdrom0 {
# dma = on
# interrupt_unmask = on
# io32_support = 0
#}

#/dev/hda {
# mult_sect_io = 16
# write_cache = off
# dma = on
#}

#command_line {
# hdparm -q -m16 -q -W0 -q -d1 /dev/hda
#}

+1
0
-1
Imagen de LZCrack
+1
0
-1

gracias, pero por lo que veo tienes todo comentado.

¿no tienes activado dma para tu copiador??

 

+1
0
-1