Ayuda para configurar red doméstica y compartir archivos.

Imagen de Gabriel_M
+1
0
-1

Consulta trasladada la foro específico.
Hola Emmanuel: Traslado la consulta, te
edito el título.
Por favor lee y respeta las normas.
======================================
En principio instala synaptic y a traves de
el las herramientas gráficas de red.
Luego lee acerca de como configurar redes y
compartir archivos con samba.


Equipo de Ubuntu-es
+1
0
-1
Imagen de emmanuel2d
+1
0
-1

hola donde es esta esa opcion que no la encuentro..

Mira si puedo ver la red de ubuntu hacia Xp pero no puedo ver de Xp hacia ubuntu

cuando quiero entrar de Xp a ubuntu server 7.10 me pide usuario y pass.....

le pondo el de sesion de ubuntu pero no me acepta

hay que cambiar algo en Xp....

A y donde esta esa opcion de synaptic

p.d.... no lo olvides que soy nueno

+1
0
-1
Imagen de Gabriel_M
+1
0
-1

Hola emm...:

•      samba:             Servidor SMB.
•      smbclient:     Diversos clientes para el protoclo SMB.
•      samba-common:     Ficheros necesarios para cliente y servidor.

Es importante sincronizar las cuentas entre el servidor Samba y las estaciones Windows. Es decir, si en una máquina con Windows ingresamos como el usuario "emman" con clave de acceso "emman07", en el servidor Samba deberá existir también dicha cuenta con ese mismo nombre y la misma clave de acceso. Como la mayoría de las cuentas de usuario que se utilizarán para acceder hacia samba no requieren acceso al interprete de mandatos del sistema, no es necesario asignar clave de acceso con el mandato passwd y se deberá definir /sbin/nologin o bien /bin/false como interpete de mandatos para la cuenta de usuario involucrada.

useradd -s /sbin/nologin usuario-windows
smbpasswd -a usuario-windows

El fichero lmhosts

Es necesario empezar resolviendo localmente los nombres NetBIOS asociándolos con direcciones IP correspondientes. Para fines prácticos el nombre NetBIOS debe tener un máximo de 11 caracteres. Normalmente tomaremos como referencia el nombre corto del servidor o el nombre corto que se asigno como alias a la interfaz de red. Este lo estableceremos en el fichero /etc/samba/lmhosts, en donde encontraremos lo siguiente:

127.0.0.1       localhost

Debemos añadir entonces el nombre que hayamos elegido asociado a la dirección IP que se tenga dentro de la red local. Opcionalmente podrá añadir también los nombres y dirección IP del resto de las máquinas que conformen la red local. La separación de espacios se hace con un tabulador. Ejemplo:

127.0.0.1       localhost
192.168.1.5     maquinalinux
192.168.1.6     maquinawindows1
192.168.1.7     maquinawindows2

Parámetros principales del fichero smb.conf.

Modifique el fichero /etc/samba/smb.conf con cualquier editor de texto. Dentro de este notará que la información que le será de utilidad viene comentada con un símbolo # y los ejemplos con ; (punto y coma), siendo estos últimos los que tomaremos como referencia.

Empezaremos por establecer el grupo de trabajo editando el valor del parámetro workgroup asignando un grupo de trabajo deseado:

workgroup = MIGRUPO

Opcionalmente puede establecer con el parámetro netbios name otro nombre distinto para el servidor si acaso fuese necesario, pero siempre tomando en cuenta que dicho nombre deberá corresponder con el establecido en el fichero /etc/samba/lmhosts:

netbios name = maquinalinux

El parámetro server string es de carácter descriptivo. Puede utilizarse un comentario breve que de una descripción del servidor.

server string = Servidor Samba %v en %L

Parámetros útiles para la seguridad.

La seguridad es importante y esta se puede establecer primeramente estableciendo la lista de control de acceso que definirá que máquinas o redes podrán acceder hacia el servidor. El parámetro hosts allow sirve para determinar esto. Si la red consiste en la máquinas con dirección IP desde 192.168.1.1 hasta 192.168.1.254, el rango de direcciones IP que se definirá en hosts allow será 192.168.1. de modo tal que solo se permitirá el acceso dichas máquinas. Note por favor el punto al final de cada rango. Modifique ésta de manera que quede del siguiente modo:

hosts allow = 192.168.1. 127.

El parámetro interfaces permite establecer desde que interfaces de red del sistema se escucharán peticiones. Samba no responderá a peticiones provenientes desde cualquier interfaz no especificada. Esto es útil cuando Samba se ejecuta en un servidor que sirve también de puerta de enlace para la red local, impidiendo se establezcan conexiones desde fuera de la red local.

interfaces = 192.168.1.254/24

Impresoras en Samba.

Las impresoras se comparten de modo predeterminado, así que solo hay que realizar algunos ajustes. Si se desea que se pueda acceder hacia la impresora como usuario invitado sin clave de acceso, basta con añadir public = Yes en la sección de impresoras del siguiente modo:

[printers]
        comment = El comentario que guste.
        path = /var/spool/samba
        printable = Yes
        browseable = No
    writable = no
    printable = yes
        public = Yes

Windows NT, 2000 y XP no tendrán problema alguno para acceder e imprimir hacia las impresoras, sin embargo Windows 95, 98 y ME suelen tener problemas para comunicarse con Samba para poder imprimir. Por tanto, si se quiere evitar problemas de conectividad con dichos sistemas operativos hay que agregar algunos parámetros que resolverán cualquier eventualidad:

[printers]
        comment = Impresoras.
        path = /var/spool/samba
        printable = Yes
        browseable = No
    writable = no
    printable = yes
        public = Yes
        print command = lpr -P %p -o raw %s -r
        lpq command = lpstat -o %p
        lprm command = cancel %p-%j

Se pude definir también a un usuario o bien un grupo (@grupo_que_sea) para la administración de las colas de las impresoras:

[printers]
        comment = Impresoras.
        path = /var/spool/samba
        printable = Yes
        browseable = No
    writable = no
    printable = yes
        public = Yes
        print command = lpr -P %p -o raw %s -r
        lpq command = lpstat -o %p
        lprm command = cancel %p-%j
        printer admin = fulano, @opers_impresion

Con lo anterior se define que el usuario fulano y quien pertenezca al grupo opers_impresion podrán realizar tareas de administración en las impresoras.
Compartiendo directorios a través de Samba.

Para los directorios o volúmenes que se irán a compartir, en el mismo fichero de configuración encontrará distintos ejemplos para distintas situaciones particulares. En general, puede utilizar el siguiente ejemplo que funcionará para la mayoría:

[Lo_que_sea]
        comment = Comentario que se le ocurra
        path = /cualquier/ruta/que/desee/compartir

En el siguiente ejemplo se compartirá a través de Samba el recurso denominado ftp, el cual está localizado en el directorio /var/ftp/pub del disco duro. Se permitirá el acceso a cualquiera pero será un recurso de solo lectura salvo para los usuarios administrador y fulano. Todo directorio nuevo que sea creado en su interior tendrá permiso 755 y todo fichero que sea puesto en su interior tendrá permiso 644.

[ftp]
    comment = Directorio del servidor FTP
    path = /var/ftp/pub
    guest ok = Yes
    read only = Yes
    write list = fulano, administrador
    directory mask = 0755
    create mask = 0644

Sugerencia: Aprende a pescar, pues sino cuando no te den pescado no sabrás que hacer. 

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de emmanuel2d
+1
0
-1

He este ""estableceremos en el fichero /etc/samba/lmhosts"" no me aparese donde puede estar ya lo busque y no lo hallo solo biene dhcp.conf, gdbcommands y smb.conf

Tengo el ubuntu server 7.10 y a ese le puse el sudo apt-get install ubuntu-desktop

puede haber un problema.....???????'

+1
0
-1
Imagen de Gabriel_M
+1
0
-1

Hola emm...:

No, no existe ningun problema.

server + ubuntu-desktop = ubuntu 

Hay archivos que si no existen se crean, lmhosts es uno de ellos.

sudo gedit /etc/samba/lmhosts 

Y le cargas lo que corresponde. 

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de emmanuel2d
+1
0
-1

Hola amigo no le entiendo  (""el mandato passwd y se deberá definir /sbin/nologin o bien /bin/false como interpete de mandatos para la cuenta de usuario involucrada.

useradd -s /sbin/nologin usuario-windows
smbpasswd -a usuario-windows """""")

 

+1
0
-1
Imagen de Gabriel_M
+1
0
-1

Hola emm...:

Debes ejecutar:

sudo useradd -s /sbin/nologin usuario-windows

o

sudo useradd -s /bin/false usuario-windows

Como siempre en Linux, existen varios caminos para lograr el mismo resultado. 

Y luego

sudo smbpasswd -a usuario-windows

Así das de alta a un usuario (useradd -s) , sin permisos de ejecución del intérprete de comandos (bash), por lo que no requiere password para ejecutar lo que no puede (bash)

Y luego le asignas un password (smbpasswd -a) para acceder a tus carpetas y archivos compartidos mediante samba.

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de emmanuel2d
+1
0
-1

hola he no entiendo donde esta eso ya lo busque por todas parte y no lo encuentro

#############################################

El parámetro server string es de carácter descriptivo. Puede utilizarse un comentario breve que de una descripción del servidor.

server string = Servidor Samba %v en %L

Parámetros útiles para la seguridad.

La seguridad es importante y esta se puede establecer primeramente estableciendo la lista de control de acceso que definirá que máquinas o redes podrán acceder hacia el servidor. El parámetro hosts allow sirve para determinar esto. Si la red consiste en la máquinas con dirección IP desde 192.168.1.1 hasta 192.168.1.254, el rango de direcciones IP que se definirá en hosts allow será 192.168.1. de modo tal que solo se permitirá el acceso dichas máquinas. Note por favor el punto al final de cada rango. Modifique ésta de manera que quede del siguiente modo:

hosts allow = 192.168.1. 127.

El parámetro interfaces permite establecer desde que interfaces de red del sistema se escucharán peticiones. Samba no responderá a peticiones provenientes desde cualquier interfaz no especificada. Esto es útil cuando Samba se ejecuta en un servidor que sirve también de puerta de enlace para la red local, impidiendo se establezcan conexiones desde fuera de la red local.

interfaces = 192.168.1.254/24

te voy a mandar lo que tengo.....

aver si me puedes ayudar ....

 

+1
0
-1
Imagen de Gabriel_M
+1
0
-1

Hola emm..:

Esos son parámetros opcionales de seguridad, si te interesa aplicarlos los estudias, y los agregas por tu cuenta y riesgo.

Si no los pones, debe funcionar igual sin problema alguno.

Debes tener presente cuando configuras algún demonio (aplicación linux) que no es necesario configurar ni activar todos los parámetros, solo los necesarios que se adapten a tu situación e intereses. 

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de emmanuel2d
+1
0
-1

Mira esto es  todo lo que tengo en el archivo smb.conf 

 

 

Sample configuration file for the Samba suite for Debian GNU/Linux.

#

#

# This is the main Samba configuration file. You should read the

# smb.conf(5) manual page in order to understand the options listed

# here. Samba has a huge number of configurable options most of which

# are not shown in this example

#

# Any line which starts with a ; (semi-colon) or a # (hash)

# is a comment and is ignored. In this example we will use a #

# for commentary and a ; for parts of the config file that you

# may wish to enable

#

# NOTE: Whenever you modify this file you should run the command

# "testparm" to check that you have not made any basic syntactic

# errors.

#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of

workgroup = GYA

# server string is the equivalent of the NT Description field

server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:

# WINS Support - Tells the NMBD component of Samba to enable its WINS Server

; wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client

# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both

; wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.

dns proxy = no

# What naming service and in what order should we use to resolve host names

# to IP addresses

; name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to

# This can be either the interface name or an IP address/netmask;

# interface names are normally preferred

; interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the

# 'interfaces' option above to use this.

# It is recommended that you enable this feature if your Samba machine is

# not protected by a firewall or is a firewall itself. However, this

# option cannot handle dynamic or non-broadcast interfaces correctly.

; bind interfaces only = true

 

 

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine

# that connects

log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).

max log size = 1000

# If you want Samba to only log through syslog then set the following

# parameter to 'yes'.

; syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything

# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log

# through syslog you should set the following parameter to something higher.

syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace

panic action = /usr/share/samba/panic-action %d

 

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account

# in this server for every user accessing the server. See

# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html

# in the samba-doc package for details.

; security = user

# You may wish to use password encryption. See the section on

# 'encrypt passwords' in the smb.conf(5) manpage before enabling.

encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what

# password database type you are using.

passdb backend = tdbsam

obey pam restrictions = yes

; guest account = nobody

invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix

# password with the SMB password when the encrypted SMB password in the

# passdb is changed.

; unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following

# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for

# sending the correct chat script for the passwd program in Debian Sarge).

passwd program = /usr/bin/passwd %u

passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes

# when requested by an SMB client instead of the program listed in

# 'passwd program'. The default is 'no'.

; pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC

# must have this setting enabled. If you are the BDC you must

# change the 'domain master' setting to no

#

; domain logons = yes

#

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of the user's profile directory

# from the client point of view)

# The following required a [profiles] share to be setup on the

# samba server (see below)

; logon path = \\%N\profiles\%U

# Another common choice is storing the profile in the user's home directory

; logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set

# It specifies the location of a user's home directory (from the client

# point of view)

; logon drive = H:

; logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set

# It specifies the script to run during logon. The script must be stored

# in the [netlogon] share

# NOTE: Must be store in 'DOS' file format convention

; logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR

# RPC pipe. The example command creates a user account with a disabled Unix

# password; please adapt to your needs

; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather

# than setting them up individually then you'll need this

; load printers = yes

# lpr(ng) printing. You may wish to override the location of the

# printcap file

; printing = bsd

; printcap name = /etc/printcap

# CUPS printing. See also the cupsaddsmb(8) manpage in the

# cupsys-client package.

; printing = cups

; printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can

# also give this right to other users to add drivers and set printer

# properties

; printer admin = @lpadmin

 

############ Misc ############

# Using the following line enables you to customise your configuration

# on a per machine basis. The %m gets replaced with the netbios name

# of the machine that is connecting

; include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.

# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html

# for details

# You may want to add the following on a Linux system:

# SO_RCVBUF=8192 SO_SNDBUF=8192

socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package

# installed. The samba maintainer and the linpopup maintainer are

# working to ease installation and configuration of linpopup and samba.

; message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this

# machine will be configured as a BDC (a secondary logon server), you

# must set this to 'no'; otherwise, the default behavior is recommended.

; domain master = auto

# Some defaults for winbind (make sure you're not using the ranges

# for something else.)

; idmap uid = 10000-20000

; idmap gid = 10000-20000

; template shell = /bin/bash

;

; The following was the default behaviour in sarge

; but samba upstream reverted the default because it might induce

; performance issues in large organizations

; See #368251 for some of the consequences of *not* having

; this setting and smb.conf(5) for all details

;

; winbind enum groups = yes

; winbind enum users = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)

# to enable the default home directory shares. This will share each

# user's home directory as \\server\username

;[homes]

; comment = Home Directories

; browseable = no

# By default, \\server\username shares can be connected to by anyone

# with access to the samba server. Un-comment the following parameter

# to make sure that only "username" can connect to \\server\username

# This might need tweaking when using external authentication schemes

; valid users = %S

# By default, the home directories are exported read-only. Change next

# parameter to 'yes' if you want to be able to write to them.

; writable = no

# File creation mask is set to 0700 for security reasons. If you want to

# create files with group=rw permissions, set next parameter to 0775.

; create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to

# create dirs. with group=rw permissions, set next parameter to 0775.

; directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons

# (you need to configure Samba to act as a domain controller too.)

;[netlogon]

; comment = Network Logon Service

; path = /home/samba/netlogon

; guest ok = yes

; writable = no

; share modes = no

# Un-comment the following and create the profiles directory to store

# users profiles (see the "logon path" option above)

# (you need to configure Samba to act as a domain controller too.)

# The path below should be writable by all users so that their

# profile directory may be created the first time they log on

;[profiles]

; comment = Users profiles

; path = /home/samba/profiles

; guest ok = no

; browseable = no

; create mask = 0600

; directory mask = 0700

wins support = no

[printers]

comment = All Printers

browseable = no

path = /var/spool/samba

printable = yes

public = no

writable = no

create mode = 0700

+1
0
-1
Imagen de Gabriel_M
+1
0
-1

Hola emm...:

Este sería el correcto, cambia el directorio compartido, este en negrita: 

=========================Comienzo============

#
# Sample configuration file for the Samba suite for Debian GNU/Linux.
#
#
# This is the main Samba configuration file. You should read the
# smb.conf(5) manual page in order to understand the options listed
# here. Samba has a huge number of configurable options most of which
# are not shown in this example
#
# Any line which starts with a ; (semi-colon) or a # (hash)
# is a comment and is ignored. In this example we will use a #
# for commentary and a ; for parts of the config file that you
# may wish to enable
#
# NOTE: Whenever you modify this file you should run the command
# "testparm" to check that you have not made any basic syntactic
# errors.
#

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = GYA

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true
#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
   security = SHARE

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using. 
   passdb backend = tdbsam

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @lpadmin

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
;   valid users = %S

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
;   writable = no

# File creation mask is set to 0600 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0664.
;   create mask = 0600

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

wins support = no
[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   public = no
   writable = no
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

[archiv]                            (aca el nombre de tu recurso compartido)
path = /media/archiv     (aca el path de tu recurso compartido)
available = yes
browsable = yes
public = yes
writable = no

=========================fin================= 

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de gould000
+1
0
-1

Tengo 2 ordenadores conectados en red con windows 7 me funcionan de maravilla pero con ubuntu no consigo que me funciones la red ni con los ordenadores con la particion de ubuntu, puedo ver los iconos de la red, me pide la clave y no me deja conectar, llevo dos semanas intentando con todo y no hay forma, a ver si me puede ayudar alguien, me gusta mucho ubuntu pero si no me funciona el intercambio de archivos tendre que dejarlo de lado, gracias de ante mano

+1
0
-1