1 semana y sin exito en la instalacion

Imagen de sabatilla
0 puntos

Empecemos estoy intentando instalar la Gusty Gibbon. (De echo me connecto desde ella) es de lo poco que puedo seguir haciendo.

Portátil Beep Iridium F12 T5250 -

Procesador Intel Core 2 Duo T5250 a 2 x 1.5Ghz - 12.1 TFT

La he instalado ya 4 veces y cada cual haciendo lo mismo con resultados muy diferentes. A veces funcionan unas cosas, a veces otras.

Lo que no tengo claro es si hay algún problema de hardware. (no creo) pero como puedo saberlo?

He reservado una partición al principio para Windows sin éxito alguno (llevo toda la semana intentándolo) dice que no tengo disco duro. Si alguien supiera aunque esto sea un foro de ubuntu, ... básicamente la partición la he echo para saber si los componentes que no me van en ubuntu en windows si me van y por tanto no es error de hardware. Pero según el CD de instalación de windows no tengo Hard Drive así que no puedo hacer nada. 

Todas las veces que voy instalando ubuntu se me corrompe poco a poco cada vez que enciendo.

La Bateria todavía no he conseguido que se me solucione, lo del brillo va y viene a antojo del equipò, lo que es bastante jodido si estás intentando leer cosas de la pantalla que te suenan a chino como "apt get -install"  

 La webcam integrada no aparece nila detecta en la detección de hardware.

El resto de componentes que no van como lo detectar las huellas me la suda.

Pero el problema es que poco a poco se va jodiendo todo, programas que están en administración o preferencias (por ejemplo el qparted)

No hay manera, y quería volver a instalarlo una vez más, però ahora el Live CD tampoco lo lee, empieza un ratito y luego dice error + error + error + error (el ordenador especifica porque son pero yo soy incapaz de reproduir todas esas líneas de código).

Alguna recomendación.?? 

Imagen de wnino
+1
0
-1

Hola sabatilla:

Pienso que lo primero que deberías hacer es verificar el estado del CD pues podría ser que tenga errores. La verificación la puedes realizar desde el mismo Live CD haciendo uso de la opción Verificar el disco en busca de errores (Check CD for defects). No estaría demás verificar también la memoria RAM usando la opción Test de memoria (Memory test) del Live CD.

Saludos.

_______________________________________________________________________________

Lee y cumple las Normas del foro, Pregunta antes a San Google y si tienes éxito con tu problema, dí cómo lo hiciste, edita el título del post y pónle (solucionado).

+1
0
-1

Lee y cumple las Normas, Pregunta antes a San Google y si tienes éxito con tu problema: dí cómo lo hiciste, edita el título del post y pónle (solucionado).
Imagen de sabatilla
+1
0
-1

-de la 7.10

 

El 1r cd de instalación se jodio después de instalarlo una vez.

El 2o después de instalarlo 3 veces.

El 3r Cd que he echo directamente dice que está jodido.

 

No lo entiendo.

 

O al menos eso dice tras el chequeo de cd's.

Es normal esto? sigo tostando cd's hasta que se me tueste el cerebro? 

+1
0
-1
Imagen de lukilokez
+1
0
-1

Hola prueba con el alternate.

Yo llevo montón de cd inutilizados y el único que mi cd reconoce casi hasta el final es el alternate.

Suerte

 

3 12 24 27 36 42 Cada vez seremos más.

+1
0
-1

3 12 24 27 36 42 Cada vez seremos más.

Imagen de lukilokez
+1
0
-1

Prueba con el cd alternate.

Yo llevo varios intentos y el ún ico que ha leido casi hasta el final es el alternate.

Suerte

 

3 12 24 27 36 42 Cada vez seremos más.

+1
0
-1

3 12 24 27 36 42 Cada vez seremos más.

Imagen de capiporra
+1
0
-1

ejecuta dmesg en un terminal y copia y pega. 

 

 

 

____________________________________________

Gutsy Gibbon 7.10 32bits/64bits

+1
0
-1

Sign by Danasoft - Myspace Layouts and Signs

Imagen de sabatilla
+1
0
-1

creo que es esto lo que me pedias 

[ 1067.199980] assign_interrupt_mode Found MSI capability
[ 1067.199984] Allocate Port Service[0000:00:1c.0:pcie00]
[ 1067.200016] Allocate Port Service[0000:00:1c.0:pcie02]
[ 1067.200123] PCI: Setting latency timer of device 0000:00:1c.1 to 64
[ 1067.200189] assign_interrupt_mode Found MSI capability
[ 1067.200191] Allocate Port Service[0000:00:1c.1:pcie00]
[ 1067.200225] Allocate Port Service[0000:00:1c.1:pcie02]
[ 1067.200335] PCI: Setting latency timer of device 0000:00:1c.2 to 64
[ 1067.200401] assign_interrupt_mode Found MSI capability
[ 1067.200404] Allocate Port Service[0000:00:1c.2:pcie00]
[ 1067.200435] Allocate Port Service[0000:00:1c.2:pcie02]
[ 1067.200604] isapnp: Scanning for PnP cards...
[ 1067.554488] isapnp: No Plug & Play device found
[ 1067.576313] Real Time Clock Driver v1.12ac
[ 1067.576495] hpet_resources: 0xfed00000 is busy
[ 1067.576545] Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled
[ 1067.577713] RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize
[ 1067.577844] input: Macintosh mouse button emulation as /class/input/input0
[ 1067.577928] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12
[ 1067.578234] i8042.c: Detected active multiplexing controller, rev 1.1.
[ 1067.578314] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1067.578319] serio: i8042 AUX0 port at 0x60,0x64 irq 12
[ 1067.578322] serio: i8042 AUX1 port at 0x60,0x64 irq 12
[ 1067.578325] serio: i8042 AUX2 port at 0x60,0x64 irq 12
[ 1067.578327] serio: i8042 AUX3 port at 0x60,0x64 irq 12
[ 1067.578444] mice: PS/2 mouse device common for all mice
[ 1067.578589] EISA: Probing bus 0 at eisa.0
[ 1067.578630] EISA: Detected 0 cards.
[ 1067.578717] TCP cubic registered
[ 1067.578731] NET: Registered protocol family 1
[ 1067.578752] Using IPI No-Shortcut mode
[ 1067.578917]   Magic number: 3:102:1011
[ 1067.579208] Freeing unused kernel memory: 364k freed
[ 1067.585526] input: AT Translated Set 2 keyboard as /class/input/input1
[ 1068.801567] AppArmor: AppArmor initialized<5>audit(1198972660.764:2):  type=1505 info="AppArmor initialized" pid=1243
[ 1068.808107] fuse init (API version 7.8)
[ 1068.812873] Failure registering capabilities with primary security module.
[ 1068.837696] ACPI: SSDT 7F7B01C0, 01D1 (r1  PmRef  Cpu0Ist     3000 INTL 20051117)
[ 1068.837930] ACPI: SSDT 7F7B0430, 04B6 (r1  PmRef  Cpu0Cst     3001 INTL 20051117)
[ 1068.838254] Monitor-Mwait will be used to enter C-1 state
[ 1068.838258] Monitor-Mwait will be used to enter C-2 state
[ 1068.838261] Monitor-Mwait will be used to enter C-3 state
[ 1068.838266] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3])
[ 1068.838513] ACPI: SSDT 7F7B00F0, 00C8 (r1  PmRef  Cpu1Ist     3000 INTL 20051117)
[ 1068.838730] ACPI: SSDT 7F7B03A0, 0085 (r1  PmRef  Cpu1Cst     3000 INTL 20051117)
[ 1068.839083] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3])
[    3.252000] Marking TSC unstable due to: possible TSC halt in C2.
[    3.256000] Time: hpet clocksource has been installed.
[    3.256000] ACPI: Thermal Zone [THRM] (63 C)
[    3.804000] usbcore: registered new interface driver usbfs
[    3.804000] usbcore: registered new interface driver hub
[    3.804000] usbcore: registered new device driver usb
[    3.804000] USB Universal Host Controller Interface driver v3.0
[    3.804000] ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16
[    3.804000] PCI: Setting latency timer of device 0000:00:1a.0 to 64
[    3.804000] uhci_hcd 0000:00:1a.0: UHCI Host Controller
[    3.804000] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[    3.804000] uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000b800
[    3.804000] usb usb1: configuration #1 chosen from 1 choice
[    3.804000] hub 1-0:1.0: USB hub found
[    3.804000] hub 1-0:1.0: 2 ports detected
[    3.812000] SCSI subsystem initialized
[    3.816000] libata version 2.21 loaded.
[    3.912000] ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19
[    3.912000] PCI: Setting latency timer of device 0000:00:1a.1 to 64
[    3.912000] uhci_hcd 0000:00:1a.1: UHCI Host Controller
[    3.912000] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2
[    3.912000] uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000b880
[    3.912000] usb usb2: configuration #1 chosen from 1 choice
[    3.912000] hub 2-0:1.0: USB hub found
[    3.912000] hub 2-0:1.0: 2 ports detected
[    4.000000] Clocksource tsc unstable (delta = -82448270 ns)
[    4.016000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 20
[    4.016000] PCI: Setting latency timer of device 0000:00:1d.0 to 64
[    4.016000] uhci_hcd 0000:00:1d.0: UHCI Host Controller
[    4.016000] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 3
[    4.016000] uhci_hcd 0000:00:1d.0: irq 20, io base 0x0000bc00
[    4.016000] usb usb3: configuration #1 chosen from 1 choice
[    4.016000] hub 3-0:1.0: USB hub found
[    4.016000] hub 3-0:1.0: 2 ports detected
[    4.120000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 21
[    4.120000] PCI: Setting latency timer of device 0000:00:1d.1 to 64
[    4.120000] uhci_hcd 0000:00:1d.1: UHCI Host Controller
[    4.120000] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 4
[    4.120000] uhci_hcd 0000:00:1d.1: irq 21, io base 0x0000c000
[    4.120000] usb usb4: configuration #1 chosen from 1 choice
[    4.120000] hub 4-0:1.0: USB hub found
[    4.120000] hub 4-0:1.0: 2 ports detected
[    4.152000] usb 1-2: new full speed USB device using uhci_hcd and address 2
[    4.224000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18
[    4.224000] PCI: Setting latency timer of device 0000:00:1d.2 to 64
[    4.224000] uhci_hcd 0000:00:1d.2: UHCI Host Controller
[    4.224000] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 5
[    4.224000] uhci_hcd 0000:00:1d.2: irq 18, io base 0x0000c080
[    4.224000] usb usb5: configuration #1 chosen from 1 choice
[    4.224000] hub 5-0:1.0: USB hub found
[    4.224000] hub 5-0:1.0: 2 ports detected
[    4.332000] ahci 0000:00:1f.2: version 2.2
[    4.332000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 18 (level, low) -> IRQ 18
[    4.372000] usb 1-2: configuration #1 chosen from 1 choice
[    4.616000] usb 5-1: new full speed USB device using uhci_hcd and address 2
[    4.796000] usb 5-1: configuration #1 chosen from 1 choice
[    5.336000] ahci 0000:00:1f.2: AHCI 0001.0100 32 slots 3 ports 3 Gbps 0x7 impl SATA mode
[    5.336000] ahci 0000:00:1f.2: flags: 64bit ncq ilck stag pm led clo pmp pio slum part
[    5.336000] PCI: Setting latency timer of device 0000:00:1f.2 to 64
[    5.336000] scsi0 : ahci
[    5.336000] scsi1 : ahci
[    5.336000] scsi2 : ahci
[    5.336000] ata1: SATA max UDMA/133 cmd 0xf881e900 ctl 0x00000000 bmdma 0x00000000 irq 18
[    5.336000] ata2: SATA max UDMA/133 cmd 0xf881e980 ctl 0x00000000 bmdma 0x00000000 irq 18
[    5.336000] ata3: SATA max UDMA/133 cmd 0xf881ea00 ctl 0x00000000 bmdma 0x00000000 irq 18
[    5.820000] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[    6.184000] ata1.00: ATA-8: TOSHIBA MK2546GSX, LB011A, max UDMA/100
[    6.184000] ata1.00: 488397168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[    6.188000] ata1.00: configured for UDMA/100
[    6.500000] ata2: SATA link down (SStatus 0 SControl 300)
[    6.816000] ata3: SATA link down (SStatus 0 SControl 300)
[    6.816000] scsi 0:0:0:0: Direct-Access     ATA      TOSHIBA MK2546GS LB01 PQ: 0 ANSI: 5
[    6.816000] ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 18
[    6.816000] PCI: Setting latency timer of device 0000:00:1a.7 to 64
[    6.816000] ehci_hcd 0000:00:1a.7: EHCI Host Controller
[    6.816000] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 6
[    6.816000] ehci_hcd 0000:00:1a.7: debug port 1
[    6.816000] PCI: cache line size of 32 is not supported by device 0000:00:1a.7
[    6.816000] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfdcff000
[    6.820000] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.820000] usb usb6: configuration #1 chosen from 1 choice
[    6.820000] hub 6-0:1.0: USB hub found
[    6.820000] hub 6-0:1.0: 4 ports detected
[    6.828000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    6.828000] sd 0:0:0:0: [sda] Write Protect is off
[    6.828000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.828000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.828000] sd 0:0:0:0: [sda] 488397168 512-byte hardware sectors (250059 MB)
[    6.828000] sd 0:0:0:0: [sda] Write Protect is off
[    6.828000] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
[    6.828000] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[    6.828000]  sda: sda1 sda2 <<6>ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 20
[    6.924000] PCI: Setting latency timer of device 0000:00:1d.7 to 64
[    6.924000] ehci_hcd 0000:00:1d.7: EHCI Host Controller
[    6.924000] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 7
[    6.924000] ehci_hcd 0000:00:1d.7: debug port 1
[    6.924000] PCI: cache line size of 32 is not supported by device 0000:00:1d.7
[    6.924000] ehci_hcd 0000:00:1d.7: irq 20, io mem 0xfdcff400
[    6.928000] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004
[    6.928000] usb usb7: configuration #1 chosen from 1 choice
[    6.928000] hub 7-0:1.0: USB hub found
[    6.928000] hub 7-0:1.0: 6 ports detected
[    6.936000]  sda5 > sda3
[    6.936000] sd 0:0:0:0: [sda] Attached SCSI disk
[    6.940000] sd 0:0:0:0: Attached scsi generic sg0 type 0
[    7.032000] r8169 Gigabit Ethernet driver 2.2LK loaded
[    7.032000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17
[    7.032000] PCI: Setting latency timer of device 0000:03:00.0 to 64
[    7.032000] eth0: RTL8168b/8111b at 0xf8888000, 00:19:db:ea:8b:69, XID 38000000 IRQ 17
[    7.032000] ata_piix 0000:00:1f.1: version 2.11
[    7.032000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 19 (level, low) -> IRQ 21
[    7.032000] PCI: Setting latency timer of device 0000:00:1f.1 to 64
[    7.032000] scsi3 : ata_piix
[    7.036000] scsi4 : ata_piix
[    7.036000] ata4: PATA max UDMA/100 cmd 0x000101f0 ctl 0x000103f6 bmdma 0x0001ffa0 irq 14
[    7.036000] ata5: PATA max UDMA/100 cmd 0x00010170 ctl 0x00010376 bmdma 0x0001ffa8 irq 15
[    7.168000] usb 1-2: USB disconnect, address 2
[    7.208000] Attempting manual resume
[    7.208000] swsusp: Resume From Partition 8:5
[    7.208000] PM: Checking swsusp image.
[    7.208000] PM: Resume from disk failed.
[    7.236000] kjournald starting.  Commit interval 5 seconds
[    7.236000] EXT3-fs: mounted filesystem with ordered data mode.
[    7.356000] ata4.00: ATAPI: MATSHITADVD-RAM UJ-850S, 1.60, max UDMA/33
[    7.420000] usb 1-2: new full speed USB device using uhci_hcd and address 3
[    7.528000] ata4.00: configured for UDMA/33
[    7.528000] ata5: port disabled. ignoring.
[    7.528000] scsi 3:0:0:0: CD-ROM            MATSHITA DVD-RAM UJ-850S  1.60 PQ: 0 ANSI: 5
[    7.528000] scsi 3:0:0:0: Attached scsi generic sg1 type 5
[    7.632000] usb 1-2: configuration #1 chosen from 1 choice
[    7.876000] usb 5-1: USB disconnect, address 2
[    8.116000] usb 5-1: new full speed USB device using uhci_hcd and address 3
[    8.292000] usb 5-1: configuration #1 chosen from 1 choice
[   13.736000] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[   13.932000] shpchp: Standard Hot Plug PCI Controller Driver version: 0.4
[   13.972000] input: PC Speaker as /class/input/input2
[   13.984000] Linux agpgart interface v0.102 (c) Dave Jones
[   13.988000] agpgart: Detected an Intel 965GM Chipset.
[   13.988000] agpgart: Detected 7676K stolen memory.
[   14.000000] agpgart: AGP aperture is 256M @ 0xd0000000
[   14.220000] sdhci: Secure Digital Host Controller Interface driver
[   14.220000] sdhci: Copyright(c) Pierre Ossman
[   14.220000] sdhci: SDHCI controller found at 0000:01:04.1 [1524:0750] (rev 0)
[   14.220000] ACPI: PCI Interrupt 0000:01:04.1[A] -> GSI 16 (level, low) -> IRQ 16
[   14.220000] mmc0: SDHCI at 0xfddff400 irq 16 DMA
[   14.224000] sdhci: SDHCI controller found at 0000:01:04.3 [1524:0751] (rev 0)
[   14.224000] ACPI: PCI Interrupt 0000:01:04.3[A] -> GSI 16 (level, low) -> IRQ 16
[   14.224000] mmc1: SDHCI at 0xfddffc00 irq 16 PIO
[   14.284000] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[   14.284000] Uniform CD-ROM driver Revision: 3.20
[   14.284000] sr 3:0:0:0: Attached scsi CD-ROM sr0
[   14.304000] Bluetooth: Core ver 2.11
[   14.304000] NET: Registered protocol family 31
[   14.304000] Bluetooth: HCI device and connection manager initialized
[   14.304000] Bluetooth: HCI socket layer initialized
[   14.304000] Bluetooth: HCI USB driver ver 2.9
[   14.308000] usbcore: registered new interface driver hci_usb
[   14.324000] ieee80211_crypt: registered algorithm 'NULL'
[   14.328000] ieee80211: 802.11 data/management/control stack, git-1.1.13
[   14.328000] ieee80211: Copyright (C) 2004-2005 Intel Corporation <jketreno@linux.intel.com>
[   14.384000] ipw3945: Intel(R) PRO/Wireless 3945 Network Connection driver for Linux, 1.2.2mp.ubuntu1
[   14.384000] ipw3945: Copyright(c) 2003-2006 Intel Corporation
[   14.384000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 18 (level, low) -> IRQ 18
[   14.384000] PCI: Setting latency timer of device 0000:02:00.0 to 64
[   14.392000] ipw3945: Detected Intel PRO/Wireless 3945ABG Network Connection
[   14.556000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 20 (level, low) -> IRQ 22
[   14.556000] PCI: Setting latency timer of device 0000:00:1b.0 to 64
[   14.576000] Synaptics Touchpad, model: 1, fw: 6.2, id: 0xa5a0b1, caps: 0xa04713/0x0
[   14.604000] input: SynPS/2 Synaptics TouchPad as /class/input/input3
[   14.768000] hda_codec: Unknown model for ALC883, trying auto-probe from BIOS...
[   15.664000] si3054: cannot initialize. EXT MID = 0000
[   15.924000] lp: driver loaded but no devices found
[   16.004000] Adding 6056464k swap on /dev/sda5.  Priority:-1 extents:1 across:6056464k
[   16.360000] ipw3945: Detected geography ABG (13 802.11bg channels, 23 802.11a channels)
[   16.552000] EXT3 FS on sda3, internal journal
[   18.272000] input: Power Button (FF) as /class/input/input4
[   18.272000] ACPI: Power Button (FF) [PWRF]
[   18.272000] input: Lid Switch as /class/input/input5
[   18.272000] ACPI: Lid Switch [LID0]
[   18.272000] input: Power Button (CM) as /class/input/input6
[   18.272000] ACPI: Power Button (CM) [PWRB]
[   18.412000] ACPI: Video Device [GFX0] (multi-head: yes  rom: no  post: no)
[   18.424000] No dock devices found.
[   18.472000] ACPI: AC Adapter [ADP1] (on-line)
[   18.488000] ACPI: Battery Slot [BAT1] (battery present)
[   19.860000] r8169: eth0: link down
[   20.088000] ppdev: user-space parallel port driver
[   20.216000] audit(1198972677.985:3):  type=1503 operation="inode_permission" requested_mask="a" denied_mask="a" name="/dev/tty" pid=5151 profile="/usr/sbin/cupsd"
[   22.160000] apm: BIOS not found.
[   24.036000] vmmon: module license 'unspecified' taints kernel.
[   24.040000] /dev/vmmon[5416]: Module vmmon: registered with major=10 minor=165
[   24.040000] /dev/vmmon[5416]: Module vmmon: initialized
[   24.184000] /dev/vmnet: open called by PID 5443 (vmnet-bridge)
[   24.184000] /dev/vmnet: hub 0 does not exist, allocating memory.
[   24.184000] /dev/vmnet: port on hub 0 successfully opened
[   24.184000] bridge-eth0: enabling the bridge
[   24.184000] bridge-eth0: up
[   24.184000] bridge-eth0: already up
[   24.184000] bridge-eth0: attached
[   24.212000] /dev/vmnet: open called by PID 5458 (vmnet-netifup)
[   24.212000] /dev/vmnet: hub 8 does not exist, allocating memory.
[   24.212000] /dev/vmnet: port on hub 8 successfully opened
[   24.212000] /dev/vmnet: open called by PID 5459 (vmnet-netifup)
[   24.212000] /dev/vmnet: hub 1 does not exist, allocating memory.
[   24.212000] /dev/vmnet: port on hub 1 successfully opened
[   24.244000] /dev/vmnet: open called by PID 5457 (vmnet-natd)
[   24.244000] /dev/vmnet: port on hub 8 successfully opened
[   24.392000] /dev/vmnet: open called by PID 5489 (vmnet-dhcpd)
[   24.392000] /dev/vmnet: port on hub 1 successfully opened
[   24.472000] /dev/vmnet: open called by PID 5488 (vmnet-dhcpd)
[   24.472000] /dev/vmnet: port on hub 8 successfully opened
[   24.536000] Failure registering capabilities with primary security module.
[   24.764000] Bluetooth: L2CAP ver 2.8
[   24.764000] Bluetooth: L2CAP socket layer initialized
[   24.928000] Bluetooth: RFCOMM socket layer initialized
[   24.928000] Bluetooth: RFCOMM TTY layer initialized
[   24.928000] Bluetooth: RFCOMM ver 1.8
[   29.864000] [drm] Initialized drm 1.1.0 20060810
[   29.868000] ACPI: PCI Interrupt 0000:00:02.0[A] -> GSI 16 (level, low) -> IRQ 16
[   29.868000] [drm] Initialized i915 1.6.0 20060119 on minor 0
[   61.440000] NET: Registered protocol family 17
[   64.616000] ieee80211_crypt: registered algorithm 'WEP'
[   68.304000] NET: Registered protocol family 10
[   68.304000] lo: Disabled Privacy Extensions
[   68.304000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[   78.600000] vmnet8: no IPv6 routers present
[   79.016000] eth1: no IPv6 routers present
[   79.088000] vmnet1: no IPv6 routers present
[  124.292000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.292000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.296000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.296000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.312000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.312000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.316000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.316000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.332000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.332000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.336000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.336000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.352000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.352000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.356000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.356000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.384000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.384000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.384000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.384000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.404000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.404000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.404000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.404000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.424000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.424000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.424000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.424000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.444000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.444000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.444000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.444000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.464000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.464000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.464000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.464000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.492000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.492000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.496000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.496000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.512000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.512000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.516000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.516000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.532000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.532000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.536000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.536000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.552000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  124.552000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.556000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  124.556000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  124.572000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  124.572000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  124.576000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  124.576000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.300000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.300000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.300000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.300000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.320000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.320000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.320000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.320000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.340000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.340000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.340000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.340000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.360000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.360000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.360000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.360000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.380000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.380000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.380000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.380000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.400000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.400000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.400000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.400000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.420000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.420000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.420000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.420000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.448000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.448000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.452000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.452000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.480000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.480000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.480000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.480000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.500000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.500000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.500000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.500000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.520000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.520000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.520000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.520000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.540000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.540000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.540000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.540000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.560000] atkbd.c: Unknown key pressed (translated set 2, code 0xf7 on isa0060/serio0).
[  127.560000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.560000] atkbd.c: Unknown key released (translated set 2, code 0xf7 on isa0060/serio0).
[  127.560000] atkbd.c: Use 'setkeycodes e077 <keycode>' to make it known.
[  127.580000] atkbd.c: Unknown key pressed (translated set 2, code 0xf8 on isa0060/serio0).
[  127.580000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.
[  127.580000] atkbd.c: Unknown key released (translated set 2, code 0xf8 on isa0060/serio0).
[  127.580000] atkbd.c: Use 'setkeycodes e078 <keycode>' to make it known.

+1
0
-1
Imagen de sabatilla
+1
0
-1

Quizás soy demasiado cuadriculado pero las cosas tendrían que tener una explicación.

 

He tostado diferentes cd's en diferentes ordenadores y ahora ya por sistema todos los cd's que hago tienen error y los estoy probando en diferentes ordenadores también.

 

Pero parece que el altrenate al fin funció.

+1
0
-1
Imagen de babi2002
+1
0
-1

Hola,

"He reservado una partición al principio para Windows sin éxito alguno (llevo toda la semana intentándolo) dice que no tengo disco duro. Si alguien supiera aunque esto sea un foro de ubuntu, ... básicamente la partición la he echo para saber si los componentes que no me van en ubuntu en windows si me van y por tanto no es error de hardware. Pero según el CD de instalación de windows no tengo Hard Drive así que no puedo hacer nada."

Esto que pones me paso a mi, pero a mi con un portatil Lenovo (IBM), al final yo pude instalarlo entrando en la BIOS y deshabilitando el soporte para discos SATA, despues me reconocio el disco el CD del XP y ahora me funciona todo correctamente, no se como será la BIOS en tu portatil pero puedes buscar algo por el estilo y probar. Espero haberte ayudado.

Taluego :)

 

 

+1
0
-1