(Solucionado) Comandos para entrar en un equipo de la red

Imagen de Fito_suc
0 puntos

Hola a tod@s!!

Tenemos un servidor llamado "sserver" con ubuntu 7.10 y un disco USB ntfs con las carpetas compartidas con samba. Desde otro equipo de la red llamado "chispas" con con ubuntu 7.10 64bits, tengo que acceder mediante consola a una carpeta del servidor "media/EXPRIMIDORA/render" para ejecutar allí un pequeño programa de granja de render llamado "Farmerjoe".

¿cómo puedo entrar desde la línea de comandos en esta carpeta del servidor?

Muchas gracias por la ayuda!!

Imagen de Gabriel_M
+1
0
-1

Hola fit...:

Para trabajar en consola te sugiero instales mc, Midnight Commander

sudo apt-get install mc

En cualquiera de sus dos ventanas, tienes la opción de red vía samba.

Es una excelente herramienta para trabajar en consola sin necesidad de teclear largos y complejos comandos. 

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de Fito_suc
+1
0
-1

Curioso programa el Midnight Commander, y muy útil, por desgracia no me ha dejado entrar vía samba en el servidor ni ná, así que no me ha servdido para esto.

Al final lo he conseguido hacer con el smb4K 

+1
0
-1

Adolfo Senabre
SUC estudio

Imagen de sansatan
+1
0
-1

Depende de dónde montes el volumen compartido. Ejecuta

mount

y dinos lo qué te devuelve para saber en qué carpeta tienes montado el volumen del servidor en el cliente. 

--------------------------------------

Un error muy frecuente: Confundir valor y precio.

+1
0
-1

--------------------------------------

Un error muy frecuente: Confundir valor y precio.

Imagen de Fito_suc
+1
0
-1

Gracias por tu respuesta, el caso es que no he conseguido montar ninguna carpeta compartida con Samba. He seguido algunos posts en este y otros foros pero no hay manera :(

Hoy me he instalado el smb4K y la verdad es que me he quedado bastante sorprendido por la facilidad de uso. Me monta las carpetas al instante y sin ningún problema.

Ahora la única pega es que me gustaría que estas carpetas se montaran tras el arranque, sin tener que iniciar el smb4K, otra pega es que al apagar el ordenador se queda un poco petao con el tema de compartir, pero bueno, al final se apaga.

Gracias de nuevo!! 

+1
0
-1

Adolfo Senabre
SUC estudio

Imagen de Gabriel_M
+1
0
-1

Hola fit...:

Copia y pega en contenido de tu smb.conf en el post. 

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de Fito_suc
+1
0
-1

Gracias por contestar,

Configuré la red siguiendo este tutorial:

http://trauko.wordpress.com/2007/09/17/instalando-samba-en-ubuntu-para-compartir-archivos-e-impresoras-en-redes-windows/

Todos los ordenadores de la red (windols y ubuntu) acceden perfectamente a las carpetas compartidas del servidor (media/EXPRIMIDORA/ carpetas_compartidas), es un disco USB en NTFS. Y puedo montar estas carpetas como unidades en las maquinas con windols.

En los equipos con Ubuntu necesitaría que se montara automáticamente una de estas carpetas compartidas (media/EXPRIMIDORA/render) como una unidad, para poder ejecutar alli el programa para la granja de render "Farmerjoe".

Hasta ahora solo he podido montarlas a través del smb4K :(

Gracias por la ayuda!! 

#======================= Global Settings =======================

[global]

## Browsing/Identification ###

# Change this to the workgroup/NT-domain name your Samba server will part of
   workgroup = suc

# server string is the equivalent of the NT Description field
   server string = %h server (Samba, Ubuntu)

# Windows Internet Name Serving Support Section:
# WINS Support - Tells the NMBD component of Samba to enable its WINS Server
;   wins support = no

# WINS Server - Tells the NMBD components of Samba to be a WINS Client
# Note: Samba can be either a WINS Server, or a WINS Client, but NOT both
;   wins server = w.x.y.z

# This will prevent nmbd to search for NetBIOS names through DNS.
   dns proxy = no

# What naming service and in what order should we use to resolve host names
# to IP addresses
;   name resolve order = lmhosts host wins bcast

#### Networking ####

# The specific set of interfaces / networks to bind to
# This can be either the interface name or an IP address/netmask;
# interface names are normally preferred
;   interfaces = 127.0.0.0/8 eth0

# Only bind to the named interfaces and/or networks; you must use the
# 'interfaces' option above to use this.
# It is recommended that you enable this feature if your Samba machine is
# not protected by a firewall or is a firewall itself.  However, this
# option cannot handle dynamic or non-broadcast interfaces correctly.
;   bind interfaces only = true

#### Debugging/Accounting ####

# This tells Samba to use a separate log file for each machine
# that connects
   log file = /var/log/samba/log.%m

# Put a capping on the size of the log files (in Kb).
   max log size = 1000

# If you want Samba to only log through syslog then set the following
# parameter to 'yes'.
;   syslog only = no

# We want Samba to log a minimum amount of information to syslog. Everything
# should go to /var/log/samba/log.{smbd,nmbd} instead. If you want to log
# through syslog you should set the following parameter to something higher.
   syslog = 0

# Do something sensible when Samba crashes: mail the admin a backtrace
   panic action = /usr/share/samba/panic-action %d

####### Authentication #######

# "security = user" is always a good idea. This will require a Unix account
# in this server for every user accessing the server. See
# /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/ServerType.html
# in the samba-doc package for details.
;   security = user

# You may wish to use password encryption.  See the section on
# 'encrypt passwords' in the smb.conf(5) manpage before enabling.
   encrypt passwords = true

# If you are using encrypted passwords, Samba will need to know what
# password database type you are using.  
   passdb backend = tdbsam

   obey pam restrictions = yes

;   guest account = nobody
   invalid users = root

# This boolean parameter controls whether Samba attempts to sync the Unix
# password with the SMB password when the encrypted SMB password in the
# passdb is changed.
;   unix password sync = no

# For Unix password sync to work on a Debian GNU/Linux system, the following
# parameters must be set (thanks to Ian Kahan <<kahan@informatik.tu-muenchen.de> for
# sending the correct chat script for the passwd program in Debian Sarge).
   passwd program = /usr/bin/passwd %u
   passwd chat = *Enter\snew\sUNIX\spassword:* %n\n *Retype\snew\sUNIX\spassword:* %n\n *passwd:*password\supdated\ssuccessfully* .

# This boolean controls whether PAM will be used for password changes
# when requested by an SMB client instead of the program listed in
# 'passwd program'. The default is 'no'.
;   pam password change = no

########## Domains ###########

# Is this machine able to authenticate users. Both PDC and BDC
# must have this setting enabled. If you are the BDC you must
# change the 'domain master' setting to no
#
;   domain logons = yes
#
# The following setting only takes effect if 'domain logons' is set
# It specifies the location of the user's profile directory
# from the client point of view)
# The following required a [profiles] share to be setup on the
# samba server (see below)
;   logon path = \\%N\profiles\%U
# Another common choice is storing the profile in the user's home directory
;   logon path = \\%N\%U\profile

# The following setting only takes effect if 'domain logons' is set
# It specifies the location of a user's home directory (from the client
# point of view)
;   logon drive = H:
;   logon home = \\%N\%U

# The following setting only takes effect if 'domain logons' is set
# It specifies the script to run during logon. The script must be stored
# in the [netlogon] share
# NOTE: Must be store in 'DOS' file format convention
;   logon script = logon.cmd

# This allows Unix users to be created on the domain controller via the SAMR
# RPC pipe.  The example command creates a user account with a disabled Unix
# password; please adapt to your needs
; add user script = /usr/sbin/adduser --quiet --disabled-password --gecos "" %u

########## Printing ##########

# If you want to automatically load your printer list rather
# than setting them up individually then you'll need this
;   load printers = yes

# lpr(ng) printing. You may wish to override the location of the
# printcap file
;   printing = bsd
;   printcap name = /etc/printcap

# CUPS printing.  See also the cupsaddsmb(8) manpage in the
# cupsys-client package.
;   printing = cups
;   printcap name = cups

# When using [print$], root is implicitly a 'printer admin', but you can
# also give this right to other users to add drivers and set printer
# properties
;   printer admin = @lpadmin

############ Misc ############

# Using the following line enables you to customise your configuration
# on a per machine basis. The %m gets replaced with the netbios name
# of the machine that is connecting
;   include = /home/samba/etc/smb.conf.%m

# Most people will find that this option gives better performance.
# See smb.conf(5) and /usr/share/doc/samba-doc/htmldocs/Samba3-HOWTO/speed.html
# for details
# You may want to add the following on a Linux system:
#         SO_RCVBUF=8192 SO_SNDBUF=8192
   socket options = TCP_NODELAY

# The following parameter is useful only if you have the linpopup package
# installed. The samba maintainer and the linpopup maintainer are
# working to ease installation and configuration of linpopup and samba.
;   message command = /bin/sh -c '/usr/bin/linpopup "%f" "%m" %s; rm %s' &

# Domain Master specifies Samba to be the Domain Master Browser. If this
# machine will be configured as a BDC (a secondary logon server), you
# must set this to 'no'; otherwise, the default behavior is recommended.
;   domain master = auto

# Some defaults for winbind (make sure you're not using the ranges
# for something else.)
;   idmap uid = 10000-20000
;   idmap gid = 10000-20000
;   template shell = /bin/bash
;
; The following was the default behaviour in sarge
; but samba upstream reverted the default because it might induce
; performance issues in large organizations
; See #368251 for some of the consequences of *not* having
; this setting and smb.conf(5) for all details
;
;   winbind enum groups = yes
;   winbind enum users = yes

#======================= Share Definitions =======================

# Un-comment the following (and tweak the other settings below to suit)
# to enable the default home directory shares.  This will share each
# user's home directory as \\server\username
;[homes]
;   comment = Home Directories
;   browseable = no

# By default, \\server\username shares can be connected to by anyone
# with access to the samba server.  Un-comment the following parameter
# to make sure that only "username" can connect to \\server\username
# This might need tweaking when using external authentication schemes
;   valid users = %S

# By default, the home directories are exported read-only. Change next
# parameter to 'yes' if you want to be able to write to them.
;   writable = no

# File creation mask is set to 0700 for security reasons. If you want to
# create files with group=rw permissions, set next parameter to 0775.
;   create mask = 0700

# Directory creation mask is set to 0700 for security reasons. If you want to
# create dirs. with group=rw permissions, set next parameter to 0775.
;   directory mask = 0700

# Un-comment the following and create the netlogon directory for Domain Logons
# (you need to configure Samba to act as a domain controller too.)
;[netlogon]
;   comment = Network Logon Service
;   path = /home/samba/netlogon
;   guest ok = yes
;   writable = no
;   share modes = no

# Un-comment the following and create the profiles directory to store
# users profiles (see the "logon path" option above)
# (you need to configure Samba to act as a domain controller too.)
# The path below should be writable by all users so that their
# profile directory may be created the first time they log on
;[profiles]
;   comment = Users profiles
;   path = /home/samba/profiles
;   guest ok = no
;   browseable = no
;   create mask = 0600
;   directory mask = 0700

[printers]
   comment = All Printers
   browseable = no
   path = /var/spool/samba
   printable = yes
   public = no
   writable = no
   create mode = 0700

# Windows clients look for this share name as a source of downloadable
# printer drivers
[print$]
   comment = Printer Drivers
   path = /var/lib/samba/printers
   browseable = yes
   read only = yes
   guest ok = no
# Uncomment to allow remote administration of Windows print drivers.
# Replace 'ntadmin' with the name of the group your admin users are
# members of.
;   write list = root, @ntadmin

# A sample share for sharing your CD-ROM with others.
;[cdrom]
;   comment = Samba server's CD-ROM
;   writable = no
;   locking = no
;   path = /cdrom
;   public = yes

# The next two parameters show how to auto-mount a CD-ROM when the
#    cdrom share is accesed. For this to work /etc/fstab must contain
#    an entry like this:
#
#       /dev/scd0   /cdrom  iso9660 defaults,noauto,ro,user   0 0
#
# The CD-ROM gets unmounted automatically after the connection to the
#
# If you don't want to use auto-mounting/unmounting make sure the CD
#    is mounted on /cdrom
#
;   preexec = /bin/mount /cdrom
;   postexec = /bin/umount /cdrom

+1
0
-1

Adolfo Senabre
SUC estudio

Imagen de Gabriel_M
+1
0
-1

Hola fit...:

No se aprecia ningun error.

Prueba con:

Instala además de samba, samba-common y smbclient:

fuse-utils libfuse2  fusesmb

sudo apt-get install fuse-utils libfuse2 fusesmb 

Crea un directorio en donde más te guste (/media) llamado network

sudo mkdir /media/network

dale permisos de lectura escritura

sudo chmod - Rf 777 /media/network

carga fuse en /etc/modules

sudo nano /etc/modules

agrega al final la línea:

fuse

Guarda el archivo y cierra nano. 

Date de alta como usuario del grupo fuse

sudo gpasswd -a tunombre de usuario fuse

Si no estaba ya agregado fuse en /etc/modules, para no reiniciar cárgalo

sudo modprobe fuse

monta la red sin sudo

fusesmb /media/network

Si esto te funciona, se monta la red, y te permite acceder a donde quieres, crea un scrip para que la orden  fusesmb /media/network se ejecute al iniciar el sistema.

Saludos.


Equipo de Ubuntu-es
+1
0
-1
Imagen de Fito_suc
+1
0
-1

Osti, muy bueno! no hay nada como saber, y no hay nada peor que andar perdido como yo :)  he seguido tus pasos y todo OK, ya tengo montada la unidad "network" en el escritorio, el problema es que esta carpeta esta... vacía :(

¿como hago para ver las carpetas compartidas del servidor en esta carpeta?

soy un pollo, lo se...

:)

+1
0
-1

Adolfo Senabre
SUC estudio

Imagen de Fito_suc
+1
0
-1

Ya está listo!! parece que la conexión inalámbrica tb petardea un poco, por eso salía la carpeta vacía. Ahora ya está funcionando todo OK.  

Muchas gracias a todos por vuestra ayuda!! 

Adolfo Senabre
SUC estudio

+1
0
-1

Adolfo Senabre
SUC estudio