Como configurar modem analogica

Imagen de elkore49
0 puntos

 No he podido configurar un moden analogico, ya use el scanmodem pero no se que descargar o que hacer en la pagina de, no se que chipset buscar ni nada, anexo el archivo modemdata que creo que es el mas importante que genera el scanmodem:


Only plain text email is forwarded by the List Server,
 as HTML can contain viruses. Use as the email Subject Line:
           YourName, YourCountry  kernel 2.6.17-10-generic
 With this Subject Line cogent experts will be alerted, and useful case names left in the Archive.
 YourCountry will enable Country specific guidance. Your contry's local Linux experts
 can be found through:
They will know your Country's modem code, which may be essential for dialup service.
Responses from are sometimes blocked by an Internet Provider mail filters.
 So in a day, also check the Archived responses at
--------------------------  System information ----------------------------
Linux version 2.6.17-10-generic (root@vernadsky) (gcc version 4.1.2 20060928 (prerelease) (Ubuntu 4.1.1-13ubuntu5)) #2 SMP Fri Oct 13 18:45:35 UTC 2006 (Ubuntu 2.6.17-10.33-generic)
 scanModem update of:  2008_02_20

 There are no blacklisted modem drivers in /etc/modprobe*  files

The Advanced Linux Sound Architecture (ALSA) packages providing audio support,
also includes drivers for some modems. The ALSA diagnostics are written during
bootup to /proc/asound/ folders.

 The /proc/asound/ audio+modem diagostics are being copied.
 Finished copy to Modem/ALSAjonathan.tgz

The ALSA verion is 1.0.11
The modem cards detected by "aplay -l"  are:

The /proc/asound/pcm file reports:
00-01: Intel ICH - MIC ADC : SiS SI7012 - MIC ADC : capture 1
00-00: Intel ICH : SiS SI7012 : playback 1 : capture 1

about /proc/asound/cards:
 0 [SI7012         ]: ICH - SiS SI7012
                      SiS SI7012 with ALC655 at 0xe000, irq 217

USB modem not detected by lsusb

For candidate card in slot 00:08.0, firmware information and bootup diagnostics are:
 PCI slot    PCI ID        SubsystemID    Name
 ----------    ---------    ---------    --------------
 00:08.0    2003:8800    1801:2800    Modem: Smart Link Ltd. Unknown device 8800

 Modem interrupt assignment and sharing:
 --- Bootup diagnostics for card in PCI slot 00:08.0 ----
[17179571.532000] ACPI: PCI Interrupt 0000:00:08.0[A] -> GSI 17 (level, low) -> IRQ 169
[17179571.532000] ACPI: PCI interrupt for device 0000:00:08.0 disabled

 The PCI slot 00:08.0 of the modem card may be disabled early in
 a bootup process,  but then enabled later. If modem drivers load
 but the  modem is not responsive, read Bootup.txt about possible fixes.
 Send dmesg.txt along with ModemData.txt to
 if help is needed.

 === Finished modem firmware and bootup diagnostics section. ===
 === Next deducing cogent software ===

Predictive diagnostics for card in bus 00:08.0:
    Modem chipset  detected on
CLASS="Class 0703: 2003:8800"
NAME="Modem: Smart Link Ltd. Unknown device 8800 "

 For candidate modem in:  00:08.0
   Class 0703: 2003:8800 Modem: Smart Link Ltd. Unknown device 8800
      Primary PCI_id  2003:8800
 Support type needed or chipset:    slamr

----------------end Softmodem section --------------
The modem is supported by the Smartlink slamr driver
plus the slmodemd helper utility.  Read the
Smartlink.txt and Modem/YourSystem.txt for follow through guidance.

 Download slamr-2.6.17-10-generic.tar.gz from
 under Linux, open a terminal and unpack with:
 $ tar zxvf slamr*.tar.gz
 Move into the unpacked folder
 $ cd slamr-2.6.17-10-generic
 Look around
 $ ls
 Run the
 $  sudo ./setup

                                            Afterwards do:
 $ slmodemd --help
 $ slmodemd --countrylist &> Clist.txt
 If not in the USA, look for your COUNTRY_NAME therein.
 Do and edit with:
 $ sudo gedit  /etc/default/sl-modem-daemon
 and therein replace the USA in the line:
 This will provide for the correct Country setting in the automated:
    slmodemd -c COUNTRY /dev/slamr0

 Read the Smartlink.txt and YourSystem.txt
Writing Smartlink.txt
============ end Smartlink section =====================

                                  Completed candidate modem analyses.

 The base of the UDEV device file system is: /dev/.udev

 Versions adequately match for the compiler installed: 4.1.2
             and the compiler used in kernel assembly: 4.1.2

 Minimal compiling resources appear complete:
   make utility - /usr/bin/make
   Compiler version 4.1
   linuc_headers base folder /lib/modules/2.6.17-10-generic/build

 However some compilations and executable functions may need additional files,
 in the FileNames.h (so called kernel "h"eaders) collection installed in  /usr/include/ .
 For martian_modem, additional required packages are libc6-dev (and for Debian/Ubuntu,  linux-libc-dev). The also required headers of package libc6 are commonly installed by default.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$  apt-get update
$  apt-get -s install linux-kernel-devel
will install needed package
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
    -rwsr-xr-- 1 root dip 260920 2006-07-10 13:13 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:

To enable dialout without Root permission do:
    $ su - root  (not for Ubuntu)
        sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
    sudo chmod a+x /usr/sbin/pppd

Checking settings of:    /etc/ppp/options
asyncmap 0
lcp-echo-interval 30
lcp-echo-failure 4

In case of a message like:
   Warning: Could not modify /etc/ppp/pap-secrets: Permission denied

Read Modem/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

 Don't worry about the following, it is for the experts
 should trouble shooting be necessary.

 Checking for modem support lines:
     /device/modem symbolic link:   
slmodemd created symbolic link /dev/ttySL0:  
     Within /etc/udev/ files:
/etc/udev/rules.d/60-symlinks.rules:# Create /dev/modem symlink
/etc/udev/rules.d/60-symlinks.rules:KERNEL=="ttyLTM[0-9]*",            SYMLINK+="modem"
     Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
     Within any ancient /etc/devfs files:

     Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------