¿Cómo me puedo conectar con un modem de 56k?

Imagen de sears
0 puntos

Me conecto a internet mediante un modem Conceptronic C56EW. En Windows XP todo funciona correctamente pero en Ubuntu no hay manera de que funcione. ¿Alguien podría explicarme paso a paso lo que tengo que hacer para poder conectarme? Gracias por anticipado

Imagen de lauchacba
+1
0
-1

te dejo este post:
http://www.ubuntu-es.org/index.php?q=node/98147

es solo un post de truco tutorial, no podes consultar o preguntar ahi, lee las normas para más explicación.

por nombre comercial no tengo ni idea de como ayudarte ya que el primer paso es reconocer el módem, la idea de ese post "truco tutorial", es clasificar los módem dial up o de 56 k en base al chipset y por tanto al "controlador sugerido". En el mismo dejo tres post más como referencia para cada grupo.

si tu módem cae en uno de esos tres grupos ya hay referencias, trata de guiarte, de lo contrario, copianos el contenido del archivo ModemData.txt que genera el script, así otro usuario puede ayudarte.

hasta luego.


ubuntu sin internet-offline

http://ar.geocities.com/novatocba

http://www.ubuntu-es.org/index.php?q=Preguntas_Frecuentes

+1
0
-1

ubuntu sin internet-offline

http://novatocba.netii.net/

http://www.ubuntu-es.org/index.php?q=Preguntas_Frecuentes

de nuevo en linea... y con ubuntu..

Imagen de sears
+1
0
-1

Este es el resultado que me ha dado el scanModem...

-------------------------- System information ----------------------------
CPU=i686,
Linux version 2.6.24-19-generic (buildd@palmer) (gcc version 4.2.3 (Ubuntu 4.2.3-2ubuntu7)) #1 SMP Wed Jun 18 14:43:41 UTC 2008
scanModem update of: 2008_08_09

There are no blacklisted modem drivers in /etc/modprobe* files
Attached USB devices are:
ID 0402:5661 ALi Corp.
ID 046d:08da Logitech, Inc. QuickCam Messanger

USB modems not recognized

=== Finished firmware and bootup diagnostics, next deducing cogent software. ===

A candidate modem is not evident among the PCI devices:
------------------------------------------------
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0)
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
------------------------------------------------
with USB and bridge devices not displayed.

If your modem is connected by an external serial cable,
or mounted internally on an ISA card, scanModem would not access it.
Try with Root permission
$ sudo wvdialconf /etc/wvdial.conf
to detect these modem types and some USB modems.
If the detection is successful, read the DOCs/wvdial.txt .
Edit the /etc/wvdial.conf with Root permission:
sudo gedit /etc/wvdial.conf
will be able to dial out with Root permission:
sudo wvdial

Many modems for which scanModem fails have Conexant chips.
From http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems

If the above tests fail, please provide any independent information available on your modem.
If an alternative boot into Microsoft windows can be done, do mouse
clicks on:
Start > Settings > Control Panel > Classical View (for Window XP) > System
> Hardware > Device Manager > Modems > Click on the + > Modem. Double click to
expand the graphic. Manufacturer information may be displayed. For example, CXT
stands for Conexant. Click the Diagnostics Tab. Record any hardware ID or vendor
and device information. From the Driver Details TAB, copy out the VENdor and DEVice information.
Next do the Query Modem and record the ATI specifications displayed such as:
ATI3 - Agere SoftModem Version 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27
Try to identify the modem setup file, with name perhaps MODEM.INF.
If may contain chipset Vendor informaton.

The /proc/asound/ audio+modem diagostics are being copied.
Finished copy to Modem/ALSAusuario.tgz

The base of the UDEV device file system is: /dev/.udev

Versions adequately match for the compiler installed: 4.2.3
and the compiler used in kernel assembly: 4.2.3

Minimal compiling resources appear complete:
make utility - /usr/bin/make
Compiler version 4.2
linuc_headers base folder /lib/modules/2.6.24-19-generic/build

However some compilations and executable functions may need additional files,
in the FileNames.h (so called kernel "h"eaders) collection installed in /usr/include/ .
For martian_modem, additional required packages are n. The also required headers of package libc6 are commonly installed by default.
Compiling hsfmodem drivers does require linux-libc-dev and libc6-dev packages, for kernels 2.6.24 and later versions.
In not included on your install CD, search for them at http://packages.ubuntu.com
or comparable Repository for other Linux distros.
When compiling ALSA drivers, the utility "patch" will also be needed.

If a driver compilation fails, with message including some lack of some FileName.h (stdio.h for example), then
Some additional kernel-header files need installation to /usr/include. The minimal additional packages are libc6-dev
and any of its dependents, under Ubuntu linux-libc-dev

If an alternate ethernet connection is available,
$ apt-get update
$ apt-get -s install linux-kernel-devel
will install needed packages.
For Debian/Ubuntu related distributions, run the following command to display the needed package list:

Otherwise packages have to be found through http://packages.ubuntu.com
Once downloaded and transferred into a Linux partition,
they can be installed alltogether with:
$ sudo dpkg -i *.deb

Checking pppd properties:
-rwsr-xr-- 1 root dip 269256 2007-10-04 21:57 /usr/sbin/pppd

In case of an "error 17" "serial loopback" problem, see:
http://linmodems.technion.ac.il/linmodems/archive-sixth/msg02637.html

To enable dialout without Root permission do:
$ su - root (not for Ubuntu)
sudo chmod a+x /usr/sbin/pppd
or under Ubuntu related Linuxes
sudo chmod a+x /usr/sbin/pppd

Checking settings of: /etc/ppp/options
asyncmap 0
noauth
crtscts
lock
hide-password
modem
proxyarp
lcp-echo-interval 30
lcp-echo-failure 4
noipx

In case of a message like:
Warning: Could not modify /etc/ppp/pap-secrets: Permission denied
see http://linmodems.technion.ac.il/bigarch/archive-sixth/msg04656.html

Read Modem/DOCs/YourSystem.txt concerning other COMM channels: eth0
Which can interfere with Browser naviagation.

Don't worry about the following, it is for experts should trouble shooting be necessary.
==========================================================

Checking for modem support lines:
--------------------------------------
/device/modem symbolic link:
slmodemd created symbolic link /dev/ttySL0:
Within /etc/udev/ files:

Within /etc/modprobe.conf files:
/etc/modprobe.d/alsa-base:options snd-atiixp-modem index=-2
/etc/modprobe.d/alsa-base:options snd-via82xx-modem index=-2
/etc/modprobe.d/blacklist-modem:# Uncomment these entries in order to blacklist unwanted modem drivers
/etc/modprobe.d/blacklist-modem:# blacklist snd-atiixp-modem
/etc/modprobe.d/blacklist-modem:# blacklist snd-via82xx-modem
Within any ancient /etc/devfs files:

Within ancient kernel 2.4.n /etc/module.conf files:

--------- end modem support lines --------

+1
0
-1
Imagen de lauchacba
+1
0
-1

traducido con google:

El candidato del módem no es evidente entre los dispositivos PCI:
------------------------------------------------
00:02.5 IDE interface: Silicon Integrated Systems [SiS] 5513 [IDE] (rev 01) 00:02.5 IDE interface: Silicon Sistemas Integrados [SiS] 5513 [IDE] (rev 01)
00:02.7 Multimedia audio controller: Silicon Integrated Systems [SiS] AC'97 Sound Controller (rev a0) 00:02.7 Multimedia audio controlador: Silicon Sistemas Integrados [SiS] sonido AC'97 Controller (rev a0)
00:04.0 Ethernet controller: Silicon Integrated Systems [SiS] SiS900 PCI Fast Ethernet (rev 91) 00:04.0 controlador Ethernet: Silicon Sistemas Integrados [SiS] SiS900 PCI Fast Ethernet (rev 91)
00:05.0 IDE interface: Silicon Integrated Systems [SiS] RAID bus controller 180 SATA/PATA [SiS] (rev 01) 00:05.0 IDE interface: Silicon Sistemas Integrados [SiS] RAID controlador de bus 180 SATA / PATA [SiS] (rev 01)
01:00.0 VGA compatible controller: nVidia Corporation NV34 [GeForce FX 5200] (rev a1) 01:00.0 controlador compatible con VGA: nVidia Corporation NV34 [GeForce FX 5200] (rev a1)
------------------------------------------------
with USB and bridge devices not displayed. con USB y dispositivos de puente no se muestra.

If your modem is connected by an external serial cable, Si su módem está conectado por un cable serie,
or mounted internally on an ISA card, scanModem would not access it. internamente o montado sobre una tarjeta ISA, scanModem no acceder a él.
Try with Root permission Pruebe con permisos de root
$ sudo wvdialconf /etc/wvdial.conf $ Sudo wvdialconf / etc / wvdial.conf
to detect these modem types and some USB modems. para detectar estos tipos de módem y algunos módems USB.
If the detection is successful, read the DOCs/wvdial.txt . Si la detección tiene éxito, leer los docs / wvdial.txt.
Edit the /etc/wvdial.conf with Root permission: Editar el archivo / etc / wvdial.conf con permisos de root:
sudo gedit /etc/wvdial.conf sudo gedit / etc / wvdial.conf
will be able to dial out with Root permission: será capaz de marcar a cabo con permisos de root:
sudo wvdial sudo wvdial

Many modems for which scanModem fails have Conexant chips. Muchos de los módems que no tienen scanModem chips Conexant.
From http://www.linuxant.com/drivers/modemident.php Desde http://www.linuxant.com/drivers/modemident.php
get the ListModem tool, which will report on Conexant chipset modems ListModem obtener la herramienta, la cual presentará un informe sobre chipset Conexant modems

If the above tests fail, please provide any independent information available on your modem. Si lo anterior no pruebas, sírvase proporcionar cualquier información independiente disponible en tu módem.
If an alternative boot into Microsoft windows can be done, do mouse Si una alternativa de arranque en Microsoft Windows se puede hacer, ¿ratón
clicks on: haga clic en:
Start > Settings > Control Panel > Classical View (for Window XP) > System Inicio> Configuración> Panel de control> Ver clásica (para Window XP)> Sistema
> Hardware > Device Manager > Modems > Click on the + > Modem. > Hardware> Administrador de dispositivos> Módems> Haga clic en el signo +> Modem. Double click to Haga doble clic para
expand the graphic. ampliar el gráfico. Manufacturer information may be displayed. Fabricante de información se pueden mostrar. For example, CXT Por ejemplo, CXT
stands for Conexant. está a favor de Conexant. Click the Diagnostics Tab. Haga clic en la pestaña Diagnóstico. Record any hardware ID or vendor Record ID cualquier hardware o del vendedor
and device information. y la información del dispositivo. From the Driver Details TAB, copy out the VENdor and DEVice information. Desde la pestaña Detalles Driver, copia a cabo el vendedor y la información del dispositivo.
Next do the Query Modem and record the ATI specifications displayed such as: A continuación hacer el Query Modem y registrar las especificaciones de ATI está representada como:
ATI3 - Agere SoftModem Version 2.1.22 ATI3 - Agere Módem por software la versión 2.1.22
ATI5 - 2.1.22, AMR Intel MB, AC97 ID:SIL REV:0x27 ATI5 - 2.1.22, AMR Intel MB, AC97 ID: SIL REV: 0x27
Try to identify the modem setup file, with name perhaps MODEM.INF. Trate de identificar el archivo de configuración del módem, con el nombre tal vez MODEM.INF.
If may contain chipset Vendor informaton. Si pueden llegar a contener informaciones de proveedores chipset.

************

en otras palabras:

scanmodem no encontro nada..

proba en terminal ejecutar:

sudo wvdialconf

y fijate si d casualidad lo detecta sin instalar nada, si no lo encuentra, en la pagina que te da, nombra un buscador para windows (no lo he probado así que no se si sirve, pero es bueno saber que existe, después lo probare).

o bien revisa en windows donde te dice y trata de obtener más detalle.

hasta luego y siento no poder ayudarte, hasta luego.


ubuntu sin internet-offline

http://ar.geocities.com/novatocba

http://www.ubuntu-es.org/index.php?q=Preguntas_Frecuentes

+1
0
-1

ubuntu sin internet-offline

http://novatocba.netii.net/

http://www.ubuntu-es.org/index.php?q=Preguntas_Frecuentes

de nuevo en linea... y con ubuntu..